ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 17 No. 2 April 2007
- 1
- Hole flanging with ironing process of two-ply thick sheet metal
- HUANG Yuung-ming(黄永明)
- 2
- Laser surface alloying fabricated porous coating on
NiTi shape memory alloy - ZHANG Song(张 松), ZHANG Chun-hua(张春华), ,
MAN Hau-chung(文效忠), LIU Chang-sheng(刘常升)
- 3
- Thermodynamic investigation of ZrO2-BaO system
- GONG Wei-ping(龚伟平), CHEN Teng-fei(陈腾飞), JIN Zhan-peng(金展鹏)
- 4
- Hot rolling characteristics of spray-formed AZ91 magnesium alloy
- WANG Xiao-feng(王晓峰), ZHAO Jiu-zhou (赵九洲),
HE Jie(何 杰), HU Zhuang-qi(胡壮麒)
- 5
- Effects of sodium tungstate on characteristics
of microarc oxidation coatings formed on magnesium
alloy in silicate-KOH electrolyte - DING Jun(丁 军), , LIANG Jun(梁 军), , HU Li-tian(胡丽天),
HAO Jing-cheng(郝京诚), XUE Qun-ji(薛群基)
- 6
- Structural stability of intermetallic compounds of Mg-Al-Ca alloy
- ZHOU Dian-wu(周惦武), , LIU Jin-shui(刘金水),
ZHANG Jian(张 健), PENG Ping(彭 平)
- 7
- Structure and antibacterial activity of new
layered perovskite compounds - TAN Shao-zao(谭绍早), ZHANG Li-ling(张力玲), XIA Liao-yuan(夏燎原),
LIU Ying-liang(刘应亮), LI Du-xin(李笃信)
- 8
- Internal oxidation thermodynamics and microstructures of Ag-Y alloy
- WU Chun-ping(吴春萍), YI Dan-qing(易丹青), CHEN Jing-chao(陈敬超),
LI Jian(李 荐), LIU Hui-qun(刘会群),
WANG Bin(王 斌), FANG Xi-ya(方西亚)
- 9
- Forming process of cross-connected finned
micro-grooves in copper strips - CHI Yong(池 勇), TANG Yong(汤 勇), CHEN Jin-chang(陈锦昌),
DENG Xue-xiong(邓学雄), LIU Lin(刘 林),
WAN Zhen-ping(万珍平), LIU Xiao-qing(刘晓晴)
- 10
- Effect of Ca on crystallization of Mg-based master
alloy containing spherical quasicrystal - ZHANG Jin-shan(张金山), DU Hong-wei(杜宏伟), LU Bin-feng(卢斌峰),
ZHANG Yan(张 焱), LIANG Wei(梁 伟),
XU Chun-xiang(许春香), LU Feng-lei(陆风雷)
- 11
- Effect of extrusion wheel angular velocity
on continuous extrusion forming process
of copper concave bus bar - WU Peng-yue(吴朋越), XIE Shui-sheng(谢水生), LI Hua-qing(李华清),
YAN Ming(鄢 明), HUANG Guo-jie(黄国杰), CHENG Lei(程 磊)
- 12
- Effect of annealing treatment on electrochemical
property of LiNi0.5Mn1.5O4 spinel - ZHANG Bao(张 宝), WANG Zhi-xing(王志兴), GUO Hua-jun(郭华军)
- 13
- Synthesis and characterization of layered
Li(Ni1/3Mn1/3Co1/3)O2 cathode materials
by spray-drying method - LIU Zhi-min(刘智敏), HU Guo-rong(胡国荣), PENG Zhong-dong(彭忠东),
DENG Xin-rong(邓新荣), LIU Ye-xiang(刘业翔)
- 14
- Influence of Ti4+ doping on electrochemical
properties of LiFePO4/C cathode material for
lithium-ion batteries - HU Guo-rong(胡国荣), GAO Xu-guang(高旭光), PENG Zhong-dong(彭忠东),
DU Ke(杜 柯), TAN Xian-yan(谭显艳), Liu Yan-jun(刘艳君)
- 15
- Influences of complex modification of P and RE
on microstructure and mechanical properties
of hypereutectic Al-20Si alloy - CHEN Chong(陈 冲), LIU Zhong-xia(刘忠侠), REN Bo(任 波),
WANG Ming-xing(王明星), WENG Yong-gang(翁永刚), LIU Zhi-yong(刘志勇)
- 16
- Micro-yield behaviors of Al2O3-SiO2(sf)/Al-Si metal matrix composites
- LIU Guan-jun(刘贯军),, LI Wen-fang(李文芳),
PENG Ji-hua(彭继华), DU Jun(杜 军)
- 17
- In-situ weld-alloying plasma arc welding of SiCp/Al MMC
- LEI Yu-cheng(雷玉成), YUAN Wei-jin(袁为进), CHEN Xi-zhang(陈希章),
ZHU Fei(朱 飞), CHENG Xiao-nong(程晓农)
- 18
- Corrosion behavior of aluminum alloy 2024-T3
by 8-hydroxy-quinoline and its derivative
in 3.5% chloride solution - LI Song-mei(李松梅), ZHANG Hong-rui(张洪瑞), LIU Jian-hua(刘建华)
- 19
- Corrosion behavior on aluminum alloy LY12
in simulated atmospheric corrosion process - WANG Zhen-yao(王振尧), MA Teng(马 腾),
HAN Wei(韩 薇), YU Guo-cai(于国才)
- 20
- Effect of homogenization treatment on microstructure
and hot workability of high strength
7B04 aluminium alloy - WANG Tao(王 涛), , YIN Zhi-min(尹志民), SUN Qiang(孙 强)
- 21
- Effect of minor Sc and Zr addition on microstructures
and mechanical properties of
Al-Zn-Mg-Cu alloys - ZOU Liang(邹 亮), PAN Qing-lin(潘清林), HE Yun-bin(何运斌),
WANG Chang-zhen(王昌臻), LIANG Wen-jie(梁文杰)
- 22
- Magnetic anisotropy in Fe-25Cr-12Co-1Si alloy
induced by external magnetic field - ZHEN Liang(甄 良), SUN Xue-yin(孙学银), XU Cheng-yan(徐成彦), ,
GAO Run-sheng(高润生), XU Ren-gen(徐仁根), QIN Lu-chang(秦禄昌),
- 23
- Crystallographic research of spangle on hot dip galvanized steel sheets
- LU Jin-tang(卢锦堂), WANG Xin-hua(王新华), CHE Chun-shan(车淳山),
KONG Gang(孔 纲), CHEN Jin-hong(陈锦虹), XU Qiao-yu(许乔瑜)
- 24
- Preparation of helicopter rotor counterbalance
component by means of permanent-mold casting - LIU Zhao-jing(刘兆晶), ZUO Feng(左 锋),
REN Shan-zhi(任善之), LI Feng-zhen(李凤珍)
- 25
- Properties and structure of RE-Ni-W-P-SiC composite
coating prepared by impulse electrodeposition - SONG Yue-hai(宋曰海), WEI Gang(魏 刚), XIONG Rong-chun(熊蓉春)
- 26
- Property measurements on spray formed Si-Al alloys
- WEI Yan-guang(魏衍广), XIONG Bai-qing(熊柏青), ZHANG Yong-an(张永安),
LIU Hong-wei(刘红伟), WANG Feng(王锋), ZHU Bao-hong(朱宝宏)
- 27
- Structure and electronic properties of SiC thin-films
deposited by RF magnetron sputtering - ZHOU Ji-cheng(周继承), ZHENG Xu-qiang(郑旭强)
- 28
- Electrical conductivity of Cu-Ag in situ filamentary composites
- NING Yuan-tao(宁远涛), ZHANG Xiao-hui(张晓辉), WU Yue-jun(吴跃军)
- 29
- Effects of deformation on microstructures and properties
of submicron crystalline Cu-5%Cr alloy - HE Wen-xiong(贺文雄), WANG Er-de(王尔德), CHEN Hui(陈 晖),
YU Yang(于 洋), LIU Jing-lei(刘京雷)
- 30
- Nanostructured yttria stabilized zirconia coatings deposited
by air plasma spraying - ZHOU Hong(周 洪), LI Fei(李 飞), HE Bo(何 博),
WANG Jun(王 俊), SUN Bao-de(孙宝德)
- 31
- Bioactivity of bioresorbable composite based on
bioactive glass and poly-L-lactide - ZHOU Zhi-hua(周智华), , RUAN Jian-ming(阮建明), ZOU Jian-peng(邹俭鹏),
ZHOU Zhong-cheng(周忠诚), SHEN Xiong-jun(申雄军)
- 32
- Industrial flow of lead in China
- MAO Jian-su(毛建素), YANG Zhi-feng(杨志峰), LU Zhong-wu(陆钟武)
- 33
- Mutagenic breeding of silver-resistant Acidithiobacillus
ferrooxidans and exploration of resistant mechanism - WU Xue-ling(吴学玲), QIU Guan-zhou(邱冠周), GAO Jian(高 健),
DING Jian-nan(丁建南), KANG Jian(康 健), LIU Xin-xing(刘新星)
- 34
- Kinetic process of oxidative leaching of chalcopyrite
under low oxygen pressure and low temperature - QIU Ting-sheng(邱廷省), NIE Guang-hua(聂光华),
WANG Jun-feng(王俊峰), CUI Li-feng(崔立凤)
- 35
- Leaching of complex sulphide concentrate in acidic
cupric chloride solutions - M. TCHOUMOU, M. ROYNETTE
- 36
- Electrochemical process of titanium extraction
- CH. RVS. NAGESH, C. S. RAMACHANDRAN
- 37
- Preparation of flake AgSnO2 composite powders by hydrothermal method
- YANG Tian-zu(杨天足), DU Zuo-juan(杜作娟), GU Ying-ying(古映莹),
QIU Xiao-yong(邱晓勇), JIANG Ming-xi(江名喜), CHU Guang(楚 广)
- 38
- Thermodynamic properties of vapor complex Na2ZrCl6
- LI Jun-li(李军丽), YU Jin(于 锦), ,
YANG Dong-mei(杨冬梅), WANG Zhi-chang(王之昌)
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9