ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 18 No. 3 June 2008
Structural Materials
- 1
- Oxidation of pre-oxidized GH128 alloy implanted with Ce+ at 1 000 ℃
- LI Mei-shuan(李美栓), QIAN Yu-hai(钱余海), , ZHOU Yan-chun(周延春)
- 2
- Effect of stress ratio on long life fatigue behavior of Ti-Al alloy under flexural loading
- XUE Hong-qian(薛红前), TAO Hua(陶 华), SHAO Ren-ping(邵忍平), B. CLAUDE
- 3
- Influence of hydrogenation on microstructures and microhardness of Ti6Al4V alloy
- ZHAO Jing-wei(赵敬伟), DING Hua(丁 桦), ZHAO Wen-juan(赵文娟),TIAN Xue-feng(田学锋), HOU Hong-liang(侯红亮), WANG Yao-qi(王耀奇)
- 4
- Effects of Nb and Si on high temperature oxidation of TiAl
- JIANG Hui-ren(姜惠仁), WANG Zhong-lei(王中雷), MA Wen-shuai(马文帅),FENG Xiao-ran(冯晓然), DONG Zi-qiang(董自强), ZHANG Liang(张 亮), LIU Yong(刘 咏)
- 5
- Wettability of TiAl alloy melt on ceramic moulds in electromagnetic field
- LI Bang-sheng(李邦盛), LIU Ai-hui(刘爱辉), NAN Hai(南 海),BI Wei-sheng(毕维生), GUO Jing-jie(郭景杰), FU Heng-zhi(傅恒志)
- 6
- Effect of properties of SiC fibers on longitudinal tensile behavior of SiCf/Ti-6Al-4V composites
- LI Jian-kang(李建康), YANG Yan-qing(杨延清), YUAN Mei-ni(原梅妮),LUO Xian(罗 贤), LI Li-li(李丽丽)
- 7
- Hot deformation of spray formed nickel-base superalloy using processing maps
- KANG Fu-wei(康福伟), , ZHANG Guo-qing(张国庆), LI Zhou(李 周), SUN Jian-fei(孙剑飞)
- 8
- Microstructure refinement of AZ91D alloy solidified with pulsed magnetic field
- WANG Bin(汪 彬), YANG Yuan-sheng(杨院生), ZHOU Ji-xue(周吉学), TONG Wen-hui(童文辉)
- 9
- Effect of processing way and aging treatment on properties and microstructures of 7B04 aluminum alloy
- LI Nian-kui(李念奎), LÜ Xin-yu(吕新宇), CUI Jian-zhong(崔建忠)
- 10
- Process parameters optimization for friction stir welding of RDE-40 aluminium alloy using Taguchi technique
- A. K. LAKSHMINARAYANAN, V. BALASUBRAMANIAN
- 11
- Microstructure characteristics and mechanical properties of rheoformed wrought aluminum alloy 2024
- GUO Hong-min(郭洪民), YANG Xiang-jie(杨湘杰), ZHANG Meng(张 萌)
- 12
- Using friction stir processing to produce ultrafine-grained microstructure in AZ61 magnesium alloy
- DU Xing-hao(杜兴蒿), WU Bao-lin(武保林)
- 13
- Effects of holding temperature and time on semi-solid isothermal heat-treated microstructure of ZA84 magnesium alloy
- YANG Ming-bo(杨明波), , PAN Fu-sheng(潘复生), CHENG Ren-ju(程仁菊), SHEN Jia(沈 佳)
- 14
- Effect of local chilling on morphology of primary α(Al) in semi-solid A356 alloy
- LIU Zheng(刘 政), , MAO Wei-min(毛卫民), ZHAO Zhen-duo(赵振铎)
- 15
- Effects of microstructure on creep behavior of Mg-5%Zn-2%Al(-2%Y) alloy
- ZOU Hong-hui(邹宏辉)
- 16
- Corrosion behavior of Mg and Mg-Zn alloys in simulated body fluid
- GAO Jia-cheng(高家诚), , WU Sha(伍 沙), QIAO Li-ying(乔丽英), , WANG Yong(王 勇)
- 17
- Phase selection of ternary intermetallic compounds during solidification of high zinc magnesium alloy
- GUAN Shao-kang(关绍康), ZHANG Chun-xiang(张春香), WANG Li-guo(王利国),WU Li-hong(吴立鸿), CHEN Pei-lei(陈培磊), TANG Ya-li(汤亚力)
- 18
- Oxidation of Al2O3-dispersion chromizing coating by pack-cementation at 800 ℃
- ZHOU Yue-bo(周月波), CHEN Hong-yu(陈洪玉), ZHANG Hai-jun(张海军), WANG Yong-dong(王永东)
- 19
- Structure and sliding wear behavior of 321 stainless steel/Al composite coating deposited by high velocity arc spraying technique
- CHEN Yong-xiong(陈永雄), XU Bin-shi(徐滨士), LIU Yan(刘 燕), LIANG Xiu-bing(梁秀兵), XU Yi(许 一)
Functional Materials
- 20
- Crystallization kinetic characteristics of oxygen-induced I-phase and Zr2Cu phase in Zr65Cu27.5Al7.5 glassy alloy
- HE Lin(贺 林), HAN Zhen-hua(韩振华), JIANG Feng(江 峰), SUN Jun(孙 军)
- 21
- Effect of Zn addition in Sn-rich alloys on interfacial reaction with Au foils
- LIU Wei(刘 威), WANG Chun-qing(王春青), TIAN Yan-hong(田艳红), CHEN Ya-rong(陈雅容)
- 22
- Piezoelectric and dielectric properties of Lix(K0.46Na0.54)1−xNb0.86Ta0.1Sb0.04O3 lead-free ceramics
- CHEN Zhi-wu(陈志武) , HU Jian-qiang(胡建强)
- 23
- Preparation and bioactivity of SiO2 functional films on titanium by PACVD
- CHENG Xiao-min(程晓敏), NIE Bang-min(聂邦民), S. KUMAR
- 24
- HA coating on titanium with nanotubular anodized TiO2 intermediate layer via electrochemical deposition
- WANG Yue-qin(王月勤), TAO Jie(陶 杰), WANG Ling(王 玲),HE Ping-ting(何娉婷), WANG Tao(汪 涛)
- 25
- Tribological properties and lubricating mechanisms of Cu nanoparticles in lubricant
- YU He-long(于鹤龙), XU Yi(许 一), SHI Pei-jing(史佩京),XU Bin-shi(徐滨士), WANG Xiao-li(王晓丽), LIU Qian(刘 谦)
- 26
- Preparation and characterization of La-Co alloy nanowire arrays by electrodeposition in AAO template under nonaqueous system
- GONG Xiao-zhong(龚晓钟), TANG Jiao-ning(汤皎宁), LI Jun-qing(李均钦), LIANG Yong-kang(梁永康)
- 27
- Preparation of YAG׃Ce3+ phosphor by sol-gel low temperature combustion method and its luminescent properties
- YAN Xing-huang(严星煌), ZHENG Song-sheng(郑淞生), YU Rui-min(于瑞敏),CAI Jing(蔡 靖), XU Zhi-wei(许志伟), LIU Chun-jia(刘春佳), LUO Xue-tao(罗学涛)
Computational Materials Science
- 28
- Numerical simulation for isothermal dendritic growth of succinonitrile-acetone alloy
- CHEN Zhi(陈 志), CHEN Chang-le(陈长乐), HAO Li-mei(郝丽梅)
- 29
- Finite element analysis of thermal residual stresses at cemented carbide rock drill buttons with cobalt-gradient structure
- HUANG Zi-qian(黄自谦), HE Yue-hui(贺跃辉), CAI Hai-tao(蔡海涛),XIAO Yi-feng(肖逸锋), HUANG Bai-yun(黄伯云)
- 30
- Elasto-plastic finite element analysis of squaring circular tube
- HUANG Yuung-ming(黄永明)
- 31
- Numerical simulation of influence of material parameters on splitting spinning of aluminum alloy
- HUANG Liang(黄 亮), YANG He(杨 合), ZHAN Mei(詹 梅), HU Li-jin(胡莉巾)
- 32
- Numerical simulation on rheo-diecasting mould filling of semi-solid key-shaped component
- BAI Yue-long(白月龙), , MAO Wei-min(毛卫民), XU Jun(徐 骏),XU Hong(徐 宏), HOU Hua(侯 华)
- 33
- Numerical simulation of jet breakup due to amplitude-modulated (A-M) disturbance
- LUO Jun(罗 俊), QI Le-hua(齐乐华), , LI Li(李 莉),YANG Fang(杨 方), JIANG Xiao-shan(蒋小珊)
- 34
- Numerical simulation of thermal behavior during laser metal deposition shaping
- LONG Ri-sheng(龙日升), , LIU Wei-jun(刘伟军), XING Fei(邢 飞), , WANG Hua-bing(王华兵),
- 35
- Numerical calculation of magnetization behavior for Co nanowire array
- ZHONG Ke-hua(钟克华), HUANG Zhi-gao(黄志高), CHEN Zhi-gao(陈志高),FENG Qian(冯 倩), YANG Yan-min(杨艳敏)
Mine Engineering, Metallurgical Engineering and Ch
- 36
- Bioleaching of low-grade copper sulphides
- YIN Sheng-hua(尹升华), WU Ai-xiang(吴爱祥), QIU Guan-zhou(邱冠周)
- 37
- Effect of salinity and acidity on bioleaching activity of mesophilic and extremely thermophilic bacteria
- H. DEVECI, M. A. JORDAN, N. POWELL, I. ALP
- 38
- Anodization of AZ91 magnesium alloy in alkaline solution containing silicate and corrosion properties of anodized films
- LI Ling-ling(李玲玲), CHENG Ying-liang(程英亮), WANG Hui-min(王慧敏), ZHANG Zhao(张 昭)
- 39
- Vapor pressure and thermochemical properties of ZrCl4 for ZrC coating of coated fuel particles
- LIU Chao(刘 超), LIU Bing(刘 兵), SHAO You-lin(邵友林),LI Zi-qiang(李自强), TANG Chun-he(唐春和)
- 40
- Chemical kinetic studies on interfacial reaction in SCS-6 SiC/Ti matrix composites
- ZHU Yan(朱 艳), , , YANG Yan-qing(杨延清), WANG Yao-yu(王尧宇)
- 41
- Self-assembly synthesis, crystal structure and nonlinear optical properties of cluster compound containing PPh2Py ligand
- ZHOU Jian-liang(周建良), WEI Chuan-jun(位传军), TONG Hai-xia(童海霞),CHUN Xiao-gai(春晓改), CHEN Qi-yuan(陈启元)
- 42
- Influence of AlF3 and hydrothermal conditions on morphologies of α-Al2O3
- FU Gao-feng(付高峰), WANG Jing(王 晶), KANG Jian(康 健)
- 43
- Assessing environmental impact of magnesium production using Pidgeon process in China
- GAO Feng(高 峰), NIE Zuo-ren(聂祚仁), WANG Zhi-hong(王志宏),GONG Xian-zheng(龚先政), ZUO Tie-yong(左铁镛)
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9