Vol. 19/No. 2/April 2009 - TNMSC

ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 19 No. 2 April 2009

Structural Materials

1: Fracture criterion for predicting surface cracking of Ti40 alloy in hot forming processes; ZHANG Xue-min(张学敏), ZENG Wei-dong(曾卫东), SHU Ying(舒滢),
ZHOU Yi-gang(周义刚), ZHAO Yong-qing(赵永庆), WU Huan(吴欢)

2: Microstructure evolution and thermal stability of
nanocrystalline Cu-Nb alloys during heat treatment; LEI Ruo-shan(雷若姗), WANG Ming-pu(汪明朴), GUO Ming-xing(郭明星),
LI Zhou(李周), DONG Qi-yi(董琦祎)

3: Slurry wear characteristics of zinc-based alloys: Effects of sand content of slurry, silicon addition to alloy system and traversal distance; B.K. PRASAD, O.P. MODI

4: Comparison of Sb and Sr on modification and refinement of Mg₂Si phase in AZ61-0.7Si magnesium alloy; YANG Ming-bo(杨明波), PAN Fu-sheng(潘复生), SHEN Jia(沈佳), BAI Liang(白亮)

5: Microstructure evolution and mechanical behavior of AZ31 Mg alloy processed by equal-channel angular pressing; FENG Xiao-ming(冯小明), AI Tao-tao(艾桃桃)

6: Effect of Ca and Y additions on oxidation behavior of AZ91 alloy at elevated temperatures; CHENG Su-ling(程素玲), YANG Gen-cang(杨根仓), FAN Jian-feng(樊建锋),
LI You-jie(李佑杰), ZHOU Yao-he(周尧和)

7: Surface topography evolvement of galvanized steels in sheet metal forming; HOU Ying-ke(侯英岢), YU Zhong-qi(于忠奇), ZHANG Wei-gang(张卫刚),
JIANG Hao-min(蒋浩民), LIN Zhong-qin(林忠钦)

8: Corrosion and wear behaviors of Al-bronzes in 5.0% H₂SO₄ solution; LI Wen-sheng(李文生), WANG Zhi-ping(王智平), LU Yang(路阳),
YUAN Li-hua(袁利华), XIAO Rong-zhen(肖荣振), ZHAO Xu-dong(赵旭东)

9: Sliding wear behaviors of electrodeposited Ni composite coatings containing micrometer and nanometer Cr particles; ZHAO Guo-gang(赵国刚), ZHOU Yue-bo(周月波), ZHANG Hai-jun(张海军)

10: Effects of zonal heat treatment on residual stresses and mechanical properties of electron beam welded TC4 alloy plates; HU Mei-juan(胡美娟), LIU Jin-he(刘金合)

11: Feasibility of integrated seed making and directional solidification of TiAl alloy using cold crucible; ZHANG Cheng-jun(张成军), FU Heng-zhi(傅恒志), XU Da-ming(徐达鸣),
GUO Jing-jie(郭景杰), BI Wei-sheng(毕维生), SU Yan-qing(苏彦庆)<

12: Compound forming technology of outside 3D integral fin of copper tubes; XIANG Jian-hua(向建化), TANG Yong(汤勇), YE Bang-yan(叶邦彦),
ZHOU Wei(周伟), YAN Hui(燕辉), HU Zhi-hua(胡志华)

13: Sensing controlled pulse key-holing condition in plasma arc welding; JIA Chuan-bao(贾传宝), WU Chuan-song(武传松), ZHANG Yu-ming(张裕明)

Functional Materials

14: Bone-like apatite formation on HA/316L stainless steel
composite surface in simulated body fluid; FAN Xin(樊新), CHEN Jian(陈剑), ZOU Jian-peng(邹俭鹏),
WAN Qian(万千), ZHOU Zhong-cheng(周忠诚), RUAN Jian-ming(阮建明)

15: Structure and magnetic properties of columnar Fe-N thin films deposited by direct current magnetron sputtering; JIA Hui(贾辉), WANG Xin(王欣), PANG Shao-ping(庞绍平),
ZHENG Wei-tao(郑伟涛), LONG Bei-hong(龙北红), LI Bo(李博)

16: Effect of sputtering pressure and rapid thermal annealing on
optical properties of Ta₂O₅ thin films; ZHOU Ji-cheng(周继承), LUO Di-tian(罗迪恬), LI You-zhen(李幼真), LIU Zheng(刘正)

17: Effects of rapid quenching on structure and electrochemical characteristics of La_0.5Ce_0.2Mg_0.3Co_0.4Ni_2.6₋_xMn; ZHANG Yang-huan(张羊换), ZHAO Dong-liang(赵栋梁), DONG Xiao-ping(董小平),
QI Yan(祁焱), GUO Shi-hai(郭世海), WANG Xin-lin(王新

18

19: Hydrogen absorption and desorption in metallic glass and nanocrystalline Zr_52.5Cu_17.9Ni_14.6Ti₅Al₁₀ alloy; CHENG Xiao-ying(程晓英), WANG Fang(王芳)

20: Density functional theory study on hydrogenation mechanism in catalyst-activated Mg(0001) surface; WU Guang-xin(吴广新), LIU Su-xia(刘素霞), ZHANG Jie-yu(张捷宇),
WU Yong-quan(吴永全), LI Qian(李谦), CHOU Kuo-chih(周国治),

21: Preparation of fine nickel powders via reduction of nickel hydrazine complex precursors; HUANG Guo-yong(黄国勇), XU Sheng-ming(徐盛明), XU Gang(徐刚),
LI Lin-yan(李林艳)，ZHANG Li-feng(张立峰)

22: Properties of nanocrystalline copper prepared by vacuum-warm-compaction method; CHU Guang(楚广), LIUWei(刘伟), YANG Tian-zu(杨天足), TANG Yong-jian(唐永建)

23: Hydro/solvo-thermal synthesis of ZnO crystallite with particular morphology; LI Yan(李酽), LIU Chuan-sheng(刘传生)

Computational Materials Science and Numerical Mode

24: One-step synthesis of antimony-doped tin dioxide nanocrystallites and their property; ZHENG Min(郑敏), WANG Bao(王保)

25: Growth restriction effects during solidification of aluminium alloys; CHEN Zhong-wei(陈忠伟), HE Zhi(何志), JIE Wan-qi(介万奇)

26: FEM equivalent model for press bend forming of aircraft integral panel; YAN Yu(阎昱), WAN Min(万敏), WANG Hai-bo(王海波)

27: Simulation of microstructures in solidification of aluminum twin-roll casting based on CA; LIU Xiao-bo(刘晓波), XU Qing-yan(许庆彦), JING Tao(荆涛), LIU Bai-cheng(柳百成)

28: Thermodynamic properties of stable and metastable phases of Pt metal; PENG Hong-jian(彭红建), XIE You-qing(谢佑卿), NIE Yao-zhuang(聂耀庄)

Mine Engineering, Metallurgical Engineering and Ch

29: Influences of material parameters on deep drawing of thin-walled hemispheric surface part; GAO En-zhi(高恩志), LI Hong-wei(李宏伟), KOU Hong-chao(寇宏超),
CHANG Hui(常辉), LI Jin-shan(李金山), ZHOU Lian(周廉)

30: Dynamic corrosion of copper-nickel sulfide by Acidithiobacillus ferrooxidans; TONG Lin-lin(佟琳琳), JIANG Mao-fa(姜茂发), YANG Hong-ying(杨洪英),
YU Juan(俞娟), FAN You-jing(范有静), ZHANG Yao(张耀)

31: Comparative studies on flotation of illite, pyrophyllite and kaolinite with Gemini and conventional cationic surfactants; XIA Liu-yin(夏柳荫), ZHONG Hong(钟宏), LIU Guang-yi(刘广义),
HUANG Zhi-qiang(黄志强), CHANG Qing-wei(常庆伟), LI Xin-gang(李鑫钢)<

32: Effect of mineral processing wastewater on flotation of sulfide minerals; CHEN Jian-ming(陈建明), LIU Run-qing(刘润清), SUN Wei(孙伟), QIU Guan-zhou(邱冠周)

33: Equilibrium of hydroxyl complex ions in Pb²⁺-H₂O system; WANG Yun-yan(王云燕), CHAI Li-yuan(柴立元), CHANG Hao(常皓),
PENG Xiao-yu(彭小玉), SHU Yu-de(舒余德)

34: Boron removal from metallurgical grade silicon by oxidizing refining; WU Ji-jun(伍继君), MA Wen-hui(马文会), YANG Bin(杨斌), DAI Yong-nian(戴永年), K. MORITA

35: Recovery of valuable metals from anode material of hydrogen-nickel battery; WU Fang(吴芳), XU Sheng-ming(徐盛明), LI Lin-yan(李林艳),
CHEN Song-zhe(陈崧哲), XU Gang(徐刚), XU Jing-ming(徐景明)

36: Extraction of niobium from sulfate leach liquor of Egyptian ore sample by triazoloquinazolinone; O. M. EL HUSSAINI

37: Preparation of lead sulfate powder directly from galena concentrates; QIN Wen-qing(覃文庆), LIU Hui(刘辉), TANG Shuang-hua(唐双华), SUN Wei(孙伟)

38: Establishment of water quality index (Na⁺, Ca²⁺) for purified water reused to zinc electrolysis process; CHAI Li-yuan(柴立元), XIAO Hai-juan(肖海娟), WANG Yun-yan(王云燕),
PEI Fei(裴斐), SHU Yu-de(舒余德), ZHANG Jin-long(张金龙)

39: Computational simulation of fluid dynamics in a tubular stirred reactor; CAO Xiao-chang(曹晓畅), ZHANG Ting-an(张廷安), ZHAO Qiu-yue(赵秋月)

40: Electrochemical noise characteristics in corrosion process of AZ91D magnesium alloy in neutral chloride solution; ZHANG Li-jun(张丽君), ZHU Xu-bei(朱旭蓓), ZHANG Zhao(张昭), ZHANG Jian-qing(张鉴清)

41: One-step pickling-activation before magnesium alloy plating; WANG Xin-juan(王新娟), YU Gang(余刚), OUYANG Yue-jun(欧阳越军),
HE Xiao-mei(何晓梅), ZHANG Jun(张俊), YE Li-yuan(叶立元)

Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9