Vol. 14/No. 3/June 2004 - TNMSC

ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 14 No. 3 June 2004

1: Microstructures and evolution mechanism of highly undercooled
Ni-Pb hypermonotectic alloy^①; XIE Hui(谢　辉), YANG Gen-cang(杨根仓), HAO Wei-xin(郝维新),
FAN Jian-feng(樊建锋), ZHU Yao-chan(朱耀产), XU Li-jun(许丽君)

2: Electrical resistivity of NiFe₂O₄ceramic and NiFe₂O₄based cermets^①; TIAN Zhong-liang(田忠良), LAI Yan-qing(赖延清), LI Jie(李劼),
ZHANG Gang(张　刚), LIU Ye-xiang(刘业翔)

3: a-C∶F∶H films prepared by PECVD^①; LIU Xiong-fei(刘雄飞), XIAO Jian-rong(肖剑荣), JIAN Xian-zhong(简献忠),
WANG Jin-bin(王金斌), GAO Jin-ding(高金定)

4: Mechanism of toughening and strengthening of
Si₃N₄/SiC/ZrO₂nanocomposites^①; YAN Jian-wu(晏建武), ZHOU Ji-cheng(周继承), LU Shi-qiang(鲁世强),
LI Wei-chao(李卫超), ZHANG Zhi-hua(张志华)

5: Electrochemical hydrogen storage properties of La0.95Mg2.05Ni9alloy
prepared by mechanical alloying^①; MENG Mian-wu(蒙冕武), LIU Xin-yu(刘心宇), CHENG Jun(成　钧),
ZHOUHua-ying(周怀营)

6: Electrochemical production of Sn-filled carbon
nanotubes in molten salts^①; HUANG Hui(黄　辉), ZHANG Wen-kui(张文魁), LI Mei-chao(李美超),
GAN Yong-ping(甘永平), MA Chun-an(马淳安), ZHANG Xiao-bin(张孝彬)

7: Degradation analysis of nickel/metal hydride battery and
its electrodes materials^①; LI Li(李　丽), WU Feng(吴　锋), YANG Kai(杨　凯)

8: Microstructure and properties of liquid film solution-diffusion
welding interface for ZCuBe2.5 Alloy^①; XU Jin-feng(徐锦锋), ZHAI Qiu-ya(翟秋亚), QIAN Han-cheng(钱翰城)

9: Hydrothermal synthesis of Zn₄SO₄(OH)₆·5H₂O and its application
as anode material for nickel/zinc batteries^①; CHEN Guo-ping(陈国平), SANG Shang-bin(桑商斌), HUANG Ke-long(黄可龙),
TANG You-gen(唐有根), TANG Zan-qian(唐赞谦), YANG Zhan-hong(杨

10: Effects of rapid heating cyclic heat treatment on microstructures and
compression mechanical properties of TiAl-based alloy^①; PENG Chao-qun(彭超群), HE Yue-hui(贺跃辉), HUANG Bai-yun(黄伯云), P.K.Liaw

11: Friction behavior of Al-Cu-Fe-B polycrystalline quasicrystals^①; ZHOU Xi-ying(周细应), LI Pei-yao(李培耀), LUO Jun-ming(罗军明),
QIAN Shi-qiang(钱士强), Tong Jian-hua(童建华)

12: Synthesis and character of spinel LiMn₂O₄^①; XU Cha-qing(徐茶清), TIAN Yan-wen(田彦文), ZHAI Yu-chun(翟玉春),
YU Bing(于　冰), GUO Zhao-jing(郭兆靖)

13: Microstructures and properties of welded joint of TiNi
shape memory alloy and stainless steel^①; QIU Xiao-ming(邱小明), SUN Da-qian(孙大谦), LI Ming-gao(李明高), LIU Wei-hong(刘卫红)

14: Mechanical properties of Cf/Si-O-C composites prepared
by hot-pressing assisted pyrolysis of polysiloxane^①; MA Qing-song(马青松), CHEN Zhao-hui(陈朝辉), ZHENG Wen-wei(郑文伟),
HU Hai-feng(胡海峰)

15: Effect of sintering on microstructures and properties of
sub-micron Ti(C,N)-based cermets^①; YU Li-xin(余立新), XIONG Wei-hao(熊惟皓), ZHENG Yong(郑　勇),
LI Guo-an(李国安)

16: Modeling of microstructural evolution and flow stress of
aluminium alloy during thermomechanical process^①; SHEN Jian(沈　健), G.Gottstein

17: Effect of heat treatment on eutectic silicon morphology and
mechanical property of Al-Si-Cu-Mg cast alloys^①; LI Run-xia(李润霞), LI Rong-de(李荣德), ZHAO Yu-hua(赵玉华),
LI Chen-xi(李晨曦),
SUN Xiao-feng(孙晓峰), GUAN Heng-rong(管

18: Microstructure of Al₂O₃/SiO₂ceramic core nano-composites^①; ZHAO Hong-liang(赵红亮), WENG Kang-rong(翁康荣), GUAN Shao-kang(关绍康),
LOU Lang-hong(楼琅洪), LI Ying-ao(李英敖),
ZHAO Hui-

19: Influence of heat treatment regimes on microstructures and
fracture characteristics of 7055Al alloy containing Ag^①; LI Hai(李　海), ZHENG Zi-qiao(郑子樵), WANG Zhi-xiu(王芝秀)

20: Characterization of phase transformation and microstructure of nano
hard phase Ti(C,N)-based cermet by spark plasma sintering^①; FENG Ping(丰　平), XIONG Wei-hao(熊惟皓), LI Peng(李　鹏),
YU Li-xin(余立新), XIA Yang-hua(夏阳华)

21: Surface alloying of Cu with Ti by double glow discharge process^①; YUAN Qing-long(袁庆龙), CHI Cheng-zhong(池成忠), SU Yong-an(苏永安),
XU Zhong(徐　重), TNAG Bin(唐　宾)

22: Dechromisation of Cu-Cr alloy in acid solutions containing Cl^-^①; XU Tao(许　涛), CHEN Ling(陈　玲), CHEN Yan(谌　岩),
YU Sheng-xue(于升学), LIU Bin(刘　彬), LIU Jian-hua(刘建华)

23: Equal channel angular deformation process and its
neuro-simulation for fine-grained magnesium alloy^①; LUO Peng(罗　蓬), HU Qiao-dan(胡侨丹), WU Xiao-lin, XIA Ke-nong

24: Purifying effect of new flux on magnesium alloy^①; GAO Hong-tao(高洪涛), WU Guo-hua(吴国华), DING Wen-jiang(丁文江),
ZHU Yan-ping(朱燕萍)

25: Microstructure and properties of submicron-scale TiC particle reinforced
titanium matrix composites prepared by shock wave consolidation^①; SUN Qiao-yan(孙巧艳), ZHU Rui-hua(朱蕊花), GU Hai-cheng(顾海澄)

26: Corrosion behavior of NiCr alloys
in HCl-containing oxidation atmosphere at 700 800℃^①; ZHANG Ke(张　轲), NIU Yan(牛　焱), PAN Tai-jun(潘太军), WU Wei-tao(吴维山文)

27: Microstructure and mechanical properties of wrought magnesium
alloy AZ31B welded by laser-TIG hybrid^①; LIU Li-ming(刘黎明), SONG Gang(宋　刚),
WANG Ji-feng(王继锋), LIANG Guo-li(梁国俐)

28: Boundary trend ofα1/(α1+α2) phase region
at lower Cu side in Al-Zn-Cu system^①; CHEN hui(陈　辉), REN Yu-ping(任玉平), XIN xin(信　昕), HAO Shi-ming(郝士明)

29: Copper hydrometallurgy—current status, preliminary economics,
future direction and positioning versus smelting^①; J. Peacey, GUO Xian-jian, E. Robles

30: Bioleaching of marmatite flotation concentrate byAcidithiobacillus
ferrooxidansandLeptospirillum ferrooxidans^①; SHI Shao-yuan(石绍渊), FANG Zhao-heng(方兆珩)

31: Collector matching in origin potential flotation^①; GU Guo-hua(顾帼华), WANG Hui(王　晖), QIU Guan-zhou(邱冠周),
HU yue-hua(胡岳华)

32: Application of extended DLVO theory in emulsion stability research^①; LIU Xiao-rong(刘晓荣), QIU Guan-zhou(邱冠周), HU Yue-hua(胡岳华),
YANG Jun-he(杨俊和), JIN Ming-lin(金鸣林)

33: S^2-behaviors analysis in leaching SrS and precipitating high
purity SrCO₃by reduction-decomposition process^①; PENG Xiao-dong(彭晓东), LIU Xiang-guo(刘相果), XIE Wei-dong(谢卫东),
LIU Jiang(刘　江), JIA Shang-yuan(贾上远), QUAN Yan-yan(权燕燕)

34: Kinetics of isothermal reduction of
stainless steelmaking dust pellets^①; PENG Ji(彭　及), PENG Bing(彭　兵), YU Di(余　笛), TANG Mo-tang(唐谟堂),
SONG Hai-chen(宋海琛), J. Lobel, J. A. Kozinski<

35: Selective removal of nickel from iron substrate by non-cyanide strippers^①; LI De-liang(李德良), WU Xiao-fu(吴晓芙), WANG Dian-zuo(王淀佐), J. A. Finch

36: An impedance response model for inhibitory effect of antibiotics
on bacterial growth in biometallurgy^①; TAO Han(陶　菡), WEI Wan-zhi(魏万之), ZHANG Shu-fen(张书芬),
ZHANG Jing-zhong(张进忠), MAO You-an(毛友安)

37: Mechanisms of flotation separation of diaspore and
kaolinite by quaternary ammonium salt DTAL^①; CHEN Xiang-qing(陈湘清), HU Yue-hua(胡岳华), WANG Yu-hua(王毓华)

38: Mathematical modeling taking into account of intrinsic kinetic properties
of cylinder-type vanadium catalyst^①; CHEN Zhen-xing(陈振兴), LI Hong-gui(李洪桂), WANG Ling-sen(王零森)

39: Corrosion behavior of two heat treatment
Al-Zn-Mg-Cu alloys in different intergranular corrosion solution^①; CAO Fa-he(曹发和), ZHANG Zhao(张　昭), LI Jin-feng(李劲风),
CHENG Ying-liang(程英亮), ZHANG Jian-qing(张鉴清), CAO Chu-nan(曹楚南)

40: Anodic reaction kinetics of electrowinning zinc in
system of Zn(Ⅱ)-NH3-NH₄Cl-H₂O^①; YANG Sheng-hai(杨声海), TANG Mo-tang(唐谟堂),
CHEN Yi-feng(陈艺锋), TANG Chao-bo(唐朝波), HE Jing(何　静)

41: Operation optimization of concentrate burner
in copper flash smelting furnace①; CHEN Hong-rong(陈红荣), MEI Chi(梅　炽), XIE Kai(谢　锴), LI Xing-fen(李欣锋),
ZHOU Jun(周　俊), WANG Xiao-hua(王晓华), G

42: Preparation of high-purity indium by electrorefining^①; ZHOU Zhi-hua(周智华), MO Hong-bing(莫红兵), ZENG Dong-ming(曾冬铭)

Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9