Vol. 14/No. 4/August 2004 - TNMSC

ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 14 No. 4 August 2004

1: Synthesis and characterization of polyaluminocarbosilane
as SiC ceramic precursor^①; YU Yu-xi(余煜玺), LI Xiao-dong(李效东), CAO Feng(曹　峰),
FENG Chun-xiang(冯春祥)

2: Developing of an expert system for nonferrous alloy design^①; LI Yi-bing(李义兵), HE hong-bo(何红波), ZHOU Ji-cheng(周继承), LI Bin(李　斌)

3: Structural and hydrogen storage capacity evolution of
Mg₂FeH₆hydride synthesized by reactive mechanical alloying^①; LI Song-lin(李松林), R. A.Varin

4: Interfacial defects of hard magnetic Pr₂Fe₁₄B phase
from amorphous to nanostructures^①; WU Yu-cheng(吴玉程)

5: Development of new type of wear and
crack resistant hardfacing electrode^①; WANG Xin-hong(王新洪), SONG Si-li(宋思利),
ZOU Zeng-da(邹增大), QU Shi-yao(曲仕尧)

6: Crystallization process in rapidly solidified Al-Nd-Ni
amorphous alloy prepared by melt spinning①; XIAO Yu-de(肖于德), LI Wen-xian(黎文献), MA Zheng-qing(马正青)

7: Microstructure evolution mechanism in adiabatic shear band in TA2^①; YANG Yang(杨　扬), XIONG Jun(熊　俊), YANG Xu-yue(杨续跃)

8: Novel algorithm for determining optimal blankholder forces
in deep drawing of aluminum alloy sheet^①; SUN Cheng-zhi(孙成智), CHEN Guan-long(陈关龙),
LIN Zhong-qin(林忠钦), ZHAO Yi-xi(赵亦希)

9: Electroless plating Ni-P matrix composite coating
reinforced by carbon nanotubes^①; DENG Fu-ming(邓福铭), CHEN Xiao-hua(陈小华),
CHEN Wei-xiang(陈卫祥), LI Wen-zhu(李文铸)

10: Hot-press sintering of MA Fe-based nanocrystalline/amorphous
soft magnetic powder^①; LU Bin(卢　斌), YI Dan-qing(易丹青), YAN Biao(严　彪), YIN Jun-lin(殷俊林),
LIU Hui-qun(刘会群), WU Biao-li(吴标理), CHEN

11: Si₃N₄/CrN nanostructured multilayers grown by RF
reactive magnetron sputtering^①; JIANG Shi-hang(姜世杭), XU Jun-hua(许俊华), LI Ge-yang(李戈扬)

12: Twice reverse shape memory effect in CuZnAl shape memory alloy^①; LI Zhou(李　周), WANG Ming-pu(汪明朴),
XU Gen-ying(徐根应), GUO Ming-xing(郭明星)

13: Process factors influencing spinning deformation of
thin-walled tubular part with longitudinal inner ribs^①; JIANG Shu-yong(江树勇), XUE Ke-min(薛克敏),
ZONG Ying-ying(宗影影), YU Lin(喻　林)

14: Key technologies of“zero die trial”design system for
aluminum profile extrusion^①; LUO Chao(罗　超), LI Da-yong(李大永),
PENG Ying-hong(彭颖红), ZUO Tie-yong(左铁镛)

15: Preparation and characterization of fibrous NiO particles by
thermal decomposition of nickelous complex precursors^①; ZHANG Chuan-fu(张传福), ZHAN Jing(湛　菁),
WU Jian-hui(邬建辉), LI Chang-jun(黎昌俊)

16: Influence of solid contaminants in oil on wear characteristics of
nano-Al₂O₃/Ni composite coating^①; DU Ling-zhong(杜令忠), XU Bin-shi(徐滨士), DONG Shi-yun(董世运),
YANG Hua(杨　华), WU Yi-xiong(吴毅雄)

17: Surface modification of LiCo_0.05Mn_1.95O₄cathode by
coating with SiO₂-TiO₂composite^①; YU Xiao-yuan(禹筱元), HU Guo-rong(胡国荣), PENG Zhong-dong(彭忠东),
XIAO jin(肖　劲), CHEN Zhao-yong(陈召勇), LIU Ye-xiang(刘业翔)

18: Effect of strontium on columnar growth of dendriticαphase
in near-eutectic Al-11.6%Si alloys^①; LIAO Heng-cheng(廖恒成), DING Yi(丁　毅), SUN Guo-xiong(孙国雄)

19: Microstructure of carbon fiber preform and distribution of
pyrolytic carbon by chemical vapor infiltration^①; CHEN Jian-xun(陈建勋), HUANG Bai-yun(黄伯云)

20: Synthesis of LaF3superfine powder by microwave heating method^①; WU Yu-feng(吴玉锋), TIAN Yan-wen(田彦文), HAN Yuan-shan(韩元山),
ZHAI Yu-chun(翟玉春), WANG Chang-zhen(王常珍)

21: Exfoliation corrosion susceptibility of 8090 Al-Li alloy
examined by electrochemical impedance spectroscopy^①; CAI Chao(蔡　超), LI Jin-feng(李劲风), ZHENG Zi-qiao(郑子樵),
ZHANG Zhao(张　昭)

22: Influences of sub-micrometer Ta and Co dopants on
microstructure and properties of tungsten heavy alloys^①; TAN Xing-long(谭兴龙), LENG Bang-yi(冷邦义), QIU Shao-yu(邱绍宇),
LI Qiang(李　强), HE Wen-yan(何文艳), WANG Chuan-hai(王传海)

23: Three-dimensional combined finite-discrete element approach
for simulation of single layer powder compaction process^①; CHEN Pu-qing(陈普庆), XIA Wei(夏　伟), ZHOU Zhao-yao(周照耀),
ZHU Quan-li(朱权利), LI Yuan-yuan(李元元)

24: Warm compacting behavior of stainless steel powders^①; XIAO Zhi-yu(肖志瑜), KE Mei-yuan(柯美元), CHEN Wei-ping(陈维平),
SHAO Ming(邵　明), LI Yuan-yuan(李元元)

25: Chemistry principles for thermoplastic polymer binder
formula selection for powder injection molding^①; LIANG Shu-quan(梁叔全), TANG yan(唐　艳),
HUANG Bai-yun(黄伯云), LI Shao-qiang(李少强)

26: Effect of carbon fiber on calcium phosphate bone cement^①; DAI Hong-lian(戴红莲), WANG Xin-yu(王欣宇), HUANG Jian(黄　健),
YAN Yu-hua(闫玉华), LI Shi-pu(李世普)

27: Constitutive equation of annealed copper with
high conductivity for deformation at high strain rates^①; ZHU Yuan-zhi(朱远志), YIN Zhi-min(尹志民), JIANG Feng(姜　锋),
SONG Lian-peng(宋练鹏), ZENG Yu(曾　渝), YANG Yang(杨　扬)

28: Mechanism of stress aging in Al-Cu(-Mg-Ag) alloys^①; CHEN Da-qin(陈大钦), ZHENG Zi-qiao(郑子樵),
LI Shi-chen(李世晨), CHEN Zhi-guo(陈志国)

29: Energy-storage welding connection characteristics of
rapidly solidified Cu-Co alloy foils^①; XU Jin-feng(徐锦锋), ZHAI Qiu-ya(翟秋亚), JIANG Yong(蒋　永)

30: Microstructure of Sm₂Co₁₇magnets and its influence on coercivity^①; LI li-ya(李丽娅), YI Jian-hong(易健宏), HUANG Bai-yun(黄伯云),
PENG Yuan-dong(彭元东), DU Juan(杜　娟)

31: Effect of two kinds of amino-acids on bioleaching metal sulfide^①; HU Yue-hua(胡岳华), HE Zhi-guo(贺治国), HU Wei-xin(胡维新),
PENG Hong(彭　宏), ZHONG Hui(钟　慧)

32: Photocatalytic activity of ANbO₃(A=Li, Na, K)^①; CHEN Qi-yuan(陈启元), YANG Ya-hui(杨亚辉), YIN Zhou-lan(尹周澜),
LI Jie(李　洁), LIANG Shen(梁　胜)

33: Thermodynamic calculation of Sn(IV)-NH⁴⁺-Cl^--H₂O system^①; TANG Mo-tang(唐谟堂), YANG Jian-guang(杨建广),
YANG Sheng-hai(杨声海), TANG Chao-bo(唐朝波)

34: Intelligent temperature control system of quench furnace^①; HU Yan-yu(胡燕瑜), GUI Wei-hua(桂卫华),
TANG Zhao-hui(唐朝晖), TANG Ling(唐　玲)

35: Preparation and characterization of LiMn_1.5Me_0.5O₄
(Me = Ti, Fe, Ni, Zn) for lithium-ion battery cathode materials^①; ZHAO Ming-shu(赵铭姝), SONG Xiao-ping(宋晓平)

36: Oxygen reduction on teflon-bonded carbon electrode^①; ZHOU De-bi(周德璧), HUANG Ke-long(黄可龙), ZHANG Shi-min(张世民)

37: Kinetics of crystal growth on seeded precipitation of
sodium aluminate solutions with new device^①; CHEN Jin-qing(陈金清), ZHANG Ping-min(张平民), GAN Guo-yao(甘国耀),
YIN Zhou-lan(尹周澜), CHEN Qi-yuan(陈启元)

38: Dual-frequency IP over Tanghuping Prospect^①; Iraj Vosoughi-Niri,TANG Jing-tian

Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9