ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 11 No. 3 June 2001
MATERIALS SCIENCE AND ENGINEERING
- 1
- Multiple steady state phenomenon
in martensitic transformation - QIN Wen(覃 文), CHEN Zhen-hua(陈振华),
HUANG Pei-yun(黄培云), ZHUANG Ying-hong(庄应烘)
- 2
- Hydrothermal synthesis and
magnetic property of NaV2O5 nanorods - GUI Zhou(桂 宙), FAN Rong(樊 荣),
CHEN Xian-hui(陈仙辉), HU Yuan(胡 源), WU Yi-cheng(吴以成)
- 3
- Influence of size of seed grains and sintering condition
on varistor properties of ZnO-Bi2O3-TiO2-Sb2O3 ceramics - XU Qing(徐 庆), CHEN Wen(陈 文), YUAN Runzhang(袁润章))
- 4
- Oxidation of two-phase Cu-Cr alloys
with different microstructures - FU Guang-yan(付广艳), NIU Yan(牛 焱),
WU Wei-tao(吴维 tao), GUAN Heng-rong(管恒荣)
- 5
- Deoxidization of CuCr25 alloys prepared
by vacuum induction melting - ZHANG Cheng-yu(张程煜), WANG Jiang(王 江),
ZHANG Hui(张 晖), YANG Zhi-mao(杨志懋), DING Bing-jun(丁秉钧)
- 6
- Evolution of microstructure and dimension of
as-molded parts during thermal removal
process of wax-based MIM binder - LI Yi-min(李益民), HUANG Bai-yun(黄伯云), LI Song-lin(李松林),
ZENG Zhou-shan(曾舟山), QU Xuan-hui(曲选辉)
- 7
- Binder composition and debinding process in PIM of AlN
- LIN Jian-liang(林健凉), QU Xuan-hui(曲选辉),
HUANG Dong-sheng(黄栋生), LI Du-xin(李笃信), QIN Ming-li(秦明礼)
- 8
- High-temperature electrochemical performance
and phase composition of Ti0.7Zr0.5V0.2Mn1.8-xNix
hydrogen storage electrode - XU Yan-hui(徐艳辉), CHEN Chang-pin(陈长聘),
LI Shou-quan(李寿权), YING Tiao(应 窕), WANG Qi-dong(王启东)
- 9
- Analysis of filling process of Ti6Al4V alloy melt poured
in permanent mold during centrifugal casting process - SHENG Wen-bin(盛文斌), LI Dong(李 东), YANG Rui(杨 锐),
LIU Yu-yin(刘羽寅), GUO Jing-jie(郭景杰), JIA Jun(贾 均)
- 10
- Influence of element Cu on hydrogen content
in superheated aluminum melt - LI Xi-zhen(李喜珍), BIAN Xiu-fang(边秀房),
LI Xiu-jun(李秀军), WANG Li(王 丽)
- 11
- Numerical simulation of temperature and strength
distributions of mold(core) on heating - WEI Zun-jie(魏尊杰), WANG Chang-wen(王长文), AN Ge-ying(安阁英)
- 12
- Calculation of power consumption
and induced heat for EMC aluminum ingots - CAO Zhi-qiang(曹志强), ZHANG Xing-guo(张兴国),
LI Zhao-xia(李朝霞), JIN Jun-ze(金俊泽)
- 13
- Temperature simulation of
EMC aluminum ingot with induced heat - LI Zhao-xia(李朝霞), ZHENG Xian-shu(郑贤淑),
CAO Zhi-qiang(曹志强), JIN Jun-ze(金俊泽)
- 14
- Refinement and thermal analysis
of hypereutectic Al-25%Si alloy - ZHANG Zhong-hua(张忠华), BIAN Xiu-fang(边秀房),
WANG Yan(王 艳), LIU Xiang-fa(刘相法)
- 15
- Numerical simulation of semisolid
continuous casting process - LI Ya-min(李亚敏), XING Shu-ming(邢书明), ZHAI Qi-jie(翟启杰)
- 16
- Recrystallization model for
hot-rolling of 5182 aluminum alloy - ZHANG Hui(张 辉), PENG Da-shu(彭大暑),
YANG Li-bin(杨立斌), MENG Li-ping(孟力平)
- 17
- Microstructures and properties
of tungsten inert gas welding joint
of super-eutectic ZA alloy - LIU Xiu-zhong(刘秀中), DONG Bo-ling(董博玲),
ZHAO Dong-jian(赵东建), ZHU Xing-hai(朱兴海)
- 19
- Mechanical properties and deformation behavior of
Ti-5Al-2.5ZrELI alloy used at cryogenic temperature - LIU Ya-xiu(刘雅秀), QIAN Dong-fan(千东范),
GAO Bao-dong(高宝东), WANG Jiang-bo(王江波),
WANG Xiao-hua(王晓华), FENG Zhao-wei(冯昭伟)
- 20
- Thermal residual stresses and stress
distributions under tensile and
compressive loadings of short fiber
reinforced metal matrix composites - DING Xiang-dong(丁向东), LIAN Jian-she(连建设),
JIANG Zhong-hao(江中浩), SUN Jun(孙 军)
- 21
- Microstructures and properties of
transient liquid phase diffusion
bonded joints of Ni3Al-base superalloy - LI Xiao-hong(李晓红), MAO Wei(毛 唯), CHENG Yao-yong(程耀永)
- 22
- Relationship between solid fraction and
distribution of Pb in Al-Pb ingot - ZHANG Peng(张 鹏), DU Yun-hui(杜云慧),
ZENG Da-ben(曾大本), REN Xue-ping(任学平),
CUI Jian-zhong(崔建忠), BA L-min(巴立民)
- 23
- Corrosion resistance of electrodeposited
RE-Ni-W-P-SiC composite coating - GUO Zhong-cheng(郭忠诚), ZHU Xia-yun(朱晓云), YANG Xian-wan(杨显万
- 24
- Tribological performance of nanometer samarium borate
- HUANG Wei-jiu(黄伟九), WANG Jiu(王 九),
WANG Ying-fang(王应芳), LI Wei-li(李慰立),CHEN Bo-shui(陈波水)
MINERAL PROCESSING, METALLURGY AND CHEMISTRY
- 26
- Modeling of thermodynamic properties of
multi-component electrolyte solutions - FANG Zheng(方 正), FANG Yuan(方 圆),
ZHANG Quan-ru(张全茹), LI Yuan-gao(李元高)
- 27
- Interaction and flotation of
diaspore with alkylamine hydrochlorides - QIN Wen-qing(覃文庆), HU Yue-hua(胡岳华),
QIU Guan-zhou(邱冠周), JIANG Hao(蒋 昊)
- 28
- Leaching hydrodynamics of
weathered elution-deposited rare earth ore - TIAN Jun(田 君), CHI Ru-an(池汝安), ZHU Guo-cai(朱国才),
XU Sheng-ming(徐盛明), QIU Xin(邱 欣), ZHANG Zhi-geng(张志庚)
- 29
- Attenuating water hammer pressure by
means of gas storage tank - HAN Wen-liang(韩文亮), HAN Jun(韩 军),
FANG Hong-wei(方红卫),ZOU Wei-sheng(邹伟生), XIA Jian-xin(夏建新)
- 30
- Optimization of grinding in
reverse flotation for bauxite - LUO Zhao-jun(骆兆军), WANG Yu-hua(王毓华),
HU Yu-hua(胡岳华), QIU Guan-zhou(邱冠周)
- 31
- Synthesis and characterization of La doped
M-type hexagonal barium ferrite fine powders - LI Hong-gui(李洪桂), GUO Rui-qian(郭睿倩),
SUN Pei-mei(孙培梅), LI Yun-jiao(李运姣),
ZHAO Zhong-wei(赵中伟), LIU Mao-sheng(刘茂盛), SU Peng-tuan(苏鹏抟)
- 32
- Preparation of Gd-Ni alloy film in urea-NaBr melt
- TONG Ye-xiang(童叶翔), LIU Li-zhi(刘莉治),
XU Chang-wei(徐常威), LIU Gui-hua(刘贵华), YANG Qi-qin(杨绮琴)
- 33
- Specific heat of superheated Al-10Sr alloy melts
- WANG Yan(王 艳), BIAN Xiu-fang(边秀房),
ZHANG Zhong-hua(张忠华), SUN Yi-min(孙益民)
- 34
- Activities of binary baths
with 1% solute as standard states - LE Qi-chi(乐启炽), LU Gui-min(路贵民),CUI Jian-zhong(崔建忠)
- 35
- Mechanism explanation for SO2 oxidation
rate of Cs-Rb-V series sulfuric acid
catalyst at low temperature - CHEN Zhen-xing(陈振兴), YE Hua(叶 华),
LIU Jin(刘 今), LI Hong-gui(李洪桂)
- 36
- Computer prediction system on
solid/solid reaction kinetics - LUO Shi-yong(罗世永), ZHANG Jia-yun(张家芸),
ZHOU Tu-ping(周土平)
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9