ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 19 Sepecial 1 September 2009
- 1
- Review of micromachining of ceramics by etching
- H. T. TING, K. A. ABOU-EL-HOSSEIN, H. B. CHUA
- 2
- Optimum condition by mechanical characteristic evaluation infriction stir welding for 5083-O Al alloy
- Min-Su HAN, Seung-Jun LEE, Jae-Cheul PARK, Seok-Cheol KO, Yong-Bin WOO, Seong-Jong KIM
- 3
- Friction stir welding of 5052 aluminum alloy plates
- Yong-Jai KWON, Seong-Beom SHIM, Dong-Hwan PARK
- 4
- Surface treatment to improve corrosion resistance of
Al plate heat exchangers - Jong-Soon KIM, Tae-Ho KANG, In-Kwan KIM
- 5
- Influence of cutting parameters on surface characteristics of cut section in cutting of Inconel 718 sheet using CW Nd:YAG laser
- Dong-Gyu AHN, Kyung-Won BYUN
- 6
- Mechanical and electrochemical characteristics evaluation in annealing treatment for ship material
- Seok-Ki JANG, Young-Jae JEONG, Seong-Jong KIM
- 7
- Electrochemical characteristics and surface morphology in non-chromate chemical conversion coating for Zn-electroplated steel sheets
- Masazumi OKIDO, Ryoichi ICHINO, Seok-Ki JANG, Seong-Jong KIM
- 8
- Corrosion characteristics of steel in seawater containing various chloride concentrations generated by electrochemical method
- Seong-Jong KIM, Seok-Ki JANG
- 9
- Effect of annealing on two different niobium-clad stainless steel PEMFC bipolar plate materials
- Sung-Tae HONG, Dae-Wook KIM, Yong-Joo YOU, K. Scott WEIL
- 10
- Numerical simulation of temperature field in plasma-arc flexible forming of laminated-composite metal sheets
- SONG Wen-qing(宋文庆), XU Wen-ji(徐文骥), WANG Xu-yue(王续跃),
MENG Jian-bing(孟建兵), LI Hong-you(李洪友)
- 11
- Densification simulation of compacted Al powders using multi-particle finite element method
- Kyung-Hun LEE, Jung-Min LEE, Byung-Min KIM
- 12
- Influence of CaO on damping capacity and
mechanical properties of Mg alloy - Dong-In JANG, Jin-Kyu LEE, Dae-Up KIM, Shae-K KIM
- 13
- Gas sensitivity of indium oxide
- HUANG Shi-zhen, LIN Wei, CHEN Wen-zhe
- 14
- Electrodeposited Ni, Fe, Co and Cu single and
multilayer nanowire arrays on anodic aluminum oxide template - Bobomurod HAMRAKULOV, In-Soo KIM, M. G. LEE, B. H. PARK
- 15
- Synthesis and microstructure of zirconia nanopowders by glycothermal processing
- Jun-Seop KIM, Dong-Hae LEE, Sung KANG, Dong-Sik BAE, Hoy-Yul PARK, Moon-Kyeung NA
- 16
- Synthesis and characterization of Ba(CoxNb1−x)O3 nanoparticles byhydrothermal processing
- Hyun-Ju KIM, Min-Cheol CHU, Seong-Jai CHO, Dong-Sik BAE
- 17
- Synthesis and characterization of metallic Pd embedded TiO2 nanoparticles by reverse micelle and sol-gel processing
- Jeoung-Ho JIN, Min-Cheol CHU, Seong-Jai CHO, Dong-Sik BAE
- 18
- Characterization of MnWO4 with flower-like clusters produced
using spray pyrolysis - Somchai THONGTEM, Surangkana WANNAPOP, Titipun THONGTEM
- 19
- Silica gel-assisted solvothermal production of CdS, CuxS (x=1, 2) and
ZnS with different morphologies - Titipun THONGTEM, Chalermchai PILAPONG, Somchai THONGTEM
- 20
- Environmentally friendly hybrid coating prepared by electro-deposition method at various seawater conditions
- Myeong-Hoon LEE, Kyung-Man MOON, Jong-Do KIM, Kang JUN, Kwang-Ho KIM
- 21
- Comparative study on discharge conditions in micro-hole electrical discharge machining of tungsten carbide (WC-Co) material
- Hyun-Seok TAK, Chang-Seung HA, Dong-Hyun KIM,
Ho-Jun LEE, Hae-June LEE, Myung-Chang KANG
- 22
- Antistatic coating material consisting of
poly (butylacrylate-co-styrene) core-nickel shell particle - Min-Yeong JEONG, Byung-Yoon AHN, Sang-Koul LEE, Won-Ki LEE, Nam-Ju JO
- 23
- Detection of stacking orientation error of CFRP composite laminates using ultrasound waves
- Sun-Kyu KIM, David HSU, Young-Hwan SEO, Kwang-Hee IM
- 24
- Mechanical properties of high-strength concrete subjected to high temperature by stressed test
- Gyu-Yong KIM, Young-Sun KIM, Tae-Gyu LEE
- 25
- Evaluation of properties of concrete using fluosilicate salts and metal (Ni, W) compounds
- Gyu-Yong KIM, Eui-Bae LEE, Bae-Su KHIL, Seung-Hun LEE
- 26
- Strain measurement of fiber optic sensor surface bonding on host material
- Shiuh-Chuan HER, Chang-Yu TSAI
- 27
- Three-dimensional machining of insulating ceramics materials with electrical discharge machining
- Yasushi FUKUZAWA, Naotake MOHRI, Hiromitsu GOTOH,Takayuki TANI
- 28
- Influence of process parameters on drilling characteristics of Al 1050 sheet with thickness of 0.2 mm using pulsed Nd׃YAG laser
- Dong-Gyu AHN, Gwang-Won JUNG
- 29
- Influence of tool deflection on micro channel pattern of 6׃4 brass with rectangular tool
- Tae-Jin JE, Kang-Won LEE, Sang-Cheon PARK, Jae-Gu KIM, Doo-Sun CHOI,
Kyoung-Taik PARK, Kyung-Hyun WHANG
- 30
- Sub-micron-structure machining on silicon by femtosecond laser
- Hung-Yin TSAI, Shao-Wei LUO, Chih-Wei WU, Shing-Hoa WANG
- 31
- Rapid manufacturing of SiC molds with micro-sized holes using abrasive water jet
- Bo-Sung SHIN, Kang-Su PARK, Yeon-Kyoung BAHK, Sun-Ki PARK, Jung-Han LEE,
Jeung-Sang GO, Myung-Chang KANG, Cha
- 32
- Measurement of metal vapor cooling speed during nanoparticle formation by pulsed wire discharge
- Yuu SHIKODA, Yoshinori TOKOI, Koji SUWA, Satoru ISHIHARA, Tsuneo SUZUKI,
Tadachika NAKAYAMA, Hisayuki SUEMATSU
- 33
- Laser micromachining of CNT/Fe/Al2O3 nanocomposites
- Kwang-Ryul KIM, Byoung-Deog CHOI, Jun-Sin YI, Sung-Hak CHO, Yong-Ho CHOA,
Dong-Soo SHIN, Dong-Ho BAE, Myung-
- 34
- Characteristics of machined surface controlled by cutting tools and conditions in machining of brittle material
- Yong-Woo KIM, Soo-Chang CHOI, Jeung-Woo PARK, Deug-Woo LEE
- 35
- Structural stability estimation of whirling unit
- Son-Jae HWAN, Han-Chang WOO, Lee-Sang RYONG, Lee-Young MOON
- 36
- Cutting force signal pattern recognition using hybrid neural network in end milling
- Song-Tae SEONG, Ko-Tae JO, Young-Moon LEE
- 37
- Optimization of image capturing method of wear particles for condition diagnosis of machine parts
- Yon-Sang CHO, Heung-Sik PARK
- 38
- Analysis and optimization of nitrile butadiene rubber sealing mechanism of ball valve
- Xue-Guan SONG, Lin WANG, Young-Chul PARK
- 39
- Ultrasonic vibrating system design and tool analysis
- Kei-Lin KUO
- 40
- Effective tool design of three-rank form as precision removal-process of ITO thin-films
- Pai-shan PA
- 41
- Dynamic simulation of universal spacer in Dynesys dynamic stabilization system for human vertebra
- Sung-Min KIM, In-Chul YANG, Seung-Yeol LEE, Sung-Youn CHO
- 42
- Easy calibration method of vision system for in-situ measurement of strain of thin films
- Jun-Hyub PARK, Dong-Joong KANG, Myung-Soo SHIN, Sung-Jo LIM,
Son-Cheol YU, Kwang-Soo LEE, Jong-Eun HA, Sung-H
- 43
- Uniform surface polished method of complex holes in abrasive flow machining
- A-Cheng WANG, Lung TSAI, Kuo-Zoo LIANG, Chun-Ho LIU, Shi-Hong WENG
- 44
- Structural optimization for ball valve made of CF8M stainless steel
- Xue-Guan SONG, Seung-Gyu KIM, Seok-Heum BAEK, Young-Chul PARK
- 45
- Voltage-induced material removal mechanism of copper for electrochemical-mechanical polishing applications
- Sang-Jun HAN, Yong-Jin SEO
- 46
- Development of single-action, two-step clinching system using finite element analysis
- Seong-Wook LEE, Tae-Hyung KIM, Geun-Jo HAN
- 47
- Stud welding for fixation of cryogenic insulation of
membrane tanks in LNG ship building - Jeong-Soo LEE, Young-Soo RYU, Nam-In KIM, Bong-Joon KIM, Yoo-Kyung KIM, Myung-Hyun KIM
- 48
- Crushing behavior of lightmass structural member
- Kil-Sung LEE, Yong-June YANG, Woo-Chae HWANG, In-Young YANG
- 49
- Attaching single carbon nanotube on tip’s apex
using dielectrophoresis of DC-pulse voltage - Hee-Jin JEONG, Yoong-Ho JUNG, Deug-Woo LEE
- 50
- Application of direct laser metal tooling for AISI H13 tool steel
- Jae-Ho LEE, Jeong-Hwan JANG, Byeong-Don JOO, Hong-Sup YIM, Young-Hoon MOON
- 51
- Machining characteristics of complex prism pattern on
electroplated roll by copper - Tae-Jin JE, Sang-Cheon PARK, Kang-Won LEE, Yeong-Eun YOO, Doo-Sun CHOI,
Kyung-Hyun WHANG, Myung-Chang KANG
- 52
- Characteristics of damaged layer in micro-machining of copper material
- Dong-Hee KWON, Jeong-Suk KIM, Myung-Chang KANG, Se-Hun KWON, Jong-Hwan LEE
- 53
- Nano-precision combined process of electrolytic in-process dressing grinding and magnetic assisted polishing on optics glass material
- Tae-Soo KWAK, Yong-Chul LEE, Gyung-Nyun KIM, Dae-Bong CHOI,
Mikio YAMANOI, Hitoshi OHMORI
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9