ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 19 Sepecial 2 September 2009
- 1
- Deformation behavior of fine-grained 5083 Al alloy at elevated temperature
- ZHANG Kai-feng(张凯锋), YAN Hong-hua(闫宏华)
- 2
- Finite element analysis of stiffness and static dent resistance of aluminum alloy double-curved panel in viscous pressure forming
- LI Yi(李 毅), WANG Zhong-Jin(王忠金)
- 3
- Quasi-static-dynamic formability of AA5052-O sheet under uniaxial and plane-strain tension
- LIU Da-hai(刘大海), YU Hai-ping(于海平), LI Chun-feng(李春峰)
- 4
- Grain refining and property improvement of AZ31 Mg alloy by hot rolling
- MIAO Qing(苗 青), HU Lian-xi(胡连喜), SUN Hong-fei(孙宏飞), WANG Er-de(王尔德)
- 5
- Effects of solution treatment and aging process on microstructure refining of semi-solid slurry of wrought aluminum alloy 7A09
- WU Xin(吴 欣), HAN Fei(韩 飞), WANG Wei-wei(王卫卫)
- 6
- Effect of heat treatment on mechanical properties of thixoformed 7A09 aluminum alloy
- WANG Wei-wei(王卫卫), JIA Bin-bin(贾彬彬), LUO Shou-jing(罗守靖)
- 7
- Microstructural evolution of spray-formed Al-11.5Zn-2.0Mg-1.6Cu alloy during hot-extrusion and heat-treatment
- GUO Shu(郭 舒), NING Zhi-liang(宁志良), CAO Fu-yang(曹福洋), SUN Jian-fei(孙剑飞)
- 8
- Mechanical properties and texture evolution during
hot rolling of AZ31 magnesium alloy - SUN Hong-fei(孙宏飞), LIANG Shu-jin(梁书锦), WANG Er-de(王尔德)
- 9
- Effect of Al and Zn additives on grain size of Mg-3Ni-2MnO2 alloy
- FANG Wa(房 娃), SUN Hong-fei(孙宏飞), FANG Wen-bin(房文斌), WANG Bin(王 彬)
- 10
- Fabrication and microstructure of nanostructured Mg-3Ni-2MnO2 by ball milling in hydrogen atmosphere
- FANG Wen-bin(房文斌), FANG Wa(房 娃), SUN Hong-fei(孙宏飞), YU Zhen-xing(于振兴)
- 11
- Hydriding and microstructure nanocrystallization of ZK60 Mg alloy by reaction milling in hydrogen
- YUAN Yuan(袁 媛), WANG Heng(王 珩), HU Lian-xi(胡连喜), SUN Hong-fei(孙宏飞), FANG Wen-bin(房文斌)
- 12
- Mechanical behaviour of Al/Al2O3 composite in pseudo-semi-solid state during isothermal compression
- CHENG Yuan-sheng(程远胜), LUO Shou-jing(罗守靖)
- 13
- Effects of extrusion deformation on mechanical properties of sub-micron Si3N4p/2024 composite
- XIU Zi-yang(修子扬), CHEN Guo-qin(陈国钦), LIU Yan-mei(刘艳梅),
YANG Wen-shu(杨文澍), WU Gao-hui(武高辉)
- 14
- Microstructure and thermal conductivity of submicron Si3N4 reinforced 2024Al composite
- YANG Wen-shu(杨文澍), XIU Zi-yang(修子扬), CHEN Guo-qin(陈国钦), WU Gao-hui(武高辉)
- 15
- Nonlinear temperature characteristic of thermal expansion of Grf/Mg composites
- SONG Mei-hui (宋美慧), XIU Zi-yang(修子扬), WU Gao-hui(武高辉), CHEN Guo-qin(陈国钦)
- 16
- Optimization of processing parameters for preparation of
Al-3Ti-1B grain refiner - LI Bao(李 豹), WANG Hong-wei(王宏伟), ZHAO Rui-feng(赵瑞峰), WEI Zun-jie(魏尊杰)
- 17
- Influence of processing parameters on coating surface roughness of aluminum alloy
- PAN Ming-qiang(潘明强), CHI Guan-xin(迟关心), WEI Dong-bo(韦东波), DI Shi-chun(狄士春)
- 18
- Hydroforming of AZ61A tubular component with various cross sections
- TANG Ze-jun(汤泽军), HE Zhu-bin(何祝斌), LIU Gang(刘 钢) YUAN Shi-jian(苑世剑), HU Lan(胡 蓝)
- 19
- Effects of hydrogenation on ambient deformation behaviors of Ti-45Al alloy
- SU Yan-qing(苏彦庆), LIU Xin-wang(刘鑫旺), ZHAO Long(赵 龙),
WANG Liang(王 亮), GUO Jing-jie(郭景杰), FU Heng-zhi(傅恒志)
- 20
- Effect of electropulsing on anisotropy behaviour of cold-rolled commercially pure titanium sheet
- WANG Zhong-jin(王忠金), SONG Hui(宋 辉)
- 21
- Microstructure and mechanical properties of Ti6Al4V/Cu-10Sn bronze diffusion-bonded joint
- ZHAO He(赵 贺), CAO Jian(曹 健), FENG Ji-cai(冯吉才)
- 22
- Superplastic forming of Ti6Al4V alloy using ZrO2-TiO2 ceramic die with adjustable linear thermal expansion coefficient
- JIANG Shao-song(蒋少松), ZHANG Kai-feng(张凯峰)
- 23
- Effect of hydrogen content and stress state on room-temperature mechanical properties of Ti-6Al-4V alloy
- YUAN Bao-guo(袁宝国), LI Chun-feng(李春峰), YU Hai-ping(于海平), SUN Dong-li(孙东立)
- 24
- Superplastic formability of Ti-6Al-4V butt-welded plate by
laser beam welding - WANG Gang(王 刚), ZHANG Wen-cong(张文丛), ZHANG Gong-lei(张功磊), XU Zhi-liang(徐志良)
- 25
- Micro electrical discharge machining of small hole in TC4 alloy
- LI Mao-sheng(李茂盛), CHI Guan-xin(迟关心), WANG Zhen-long(王振龙),
WANG Yu-kui(王玉魁), DAI Li(戴 立)
- 26
- Microstructure evolution of as-cast Nb-Ti-C alloys
- WEI Wen-qing(魏文庆), WANG Hong-wei(王宏伟), GAO Zeng-xin(高增新), WEI Zun-jie(魏尊杰)
- 27
- Properties of vacuum cast CuCr25 and CuCr25Te contact material
- XIU Shi-xin(修士新), YANG Ren(杨 韧), XUE Jun(薛 军), WANG Jin-xing(汪金星)
- 28
- Fabrication and thermo-physical properties of TiB2p/Cu composites for electronic packaging applications
- CHENGuo-qin(陈国钦), XIU Zi-yang(修子扬), MENG Song-he(孟松鹤),
WU Gao-hui(武高辉), ZHU De-zhi(朱德志)
- 29
- Effect of extrusion ratio on coating extrusion of Pb-GF composite wire by numerical simulation and experimental investigation
- WANG Xin(王 欣), SUN Hong-fei(孙宏飞), FANG Wen-bin(房文斌)
- 30
- Multiscale simulation and nanoindentation experimental study of initial plasticity of Fe single crystal
- YUAN Lin(袁 林), SHAN De-bin(单德彬), GUO Bin(郭 斌)
- 31
- Influence of processing parameters and heat treatment on phase composition and microstructure of plasma sprayed hydroxyapatite coatings
- ZHAO Guo-liang(赵国亮), WEN Guang-wu(温广武), WU Kun(吴 昆)
- 32
- Influence of voids on interlaminar shear strength of carbon/epoxy fabric laminates
- ZHU Hong-yan(朱洪艳), LI Di-hong(李地红), ZHANG Dong-xing(张东兴),
WU Bao-chang(吴宝昌), CHEN Yu-yong(陈玉勇)
- 33
- Effect of preparation conditions on selective oxidation of propane to acrylic acid
- YU Zhen-xing(于振兴), ZHENG Wei(郑 伟), XU Wen-long(徐文龙),
ZHANG Yu-hang(张宇航), FU Hong-ying(付红英), ZHANG Ping(张 平)
- 34
- a novel one-step method to synthesize copper nitrate hydroxide nanorings
- Wang Xin-bo(王新波), Huang Long-nan(黄龙男)
- 35
- Flow field simulation of double layer atomizer
- ZHAO Wen-jun(赵文军), CAO Fu-yang(曹福洋), NING Zhi-liang(宁志良), SUN Jian-fei(孙剑飞)
- 36
- Factors governing heat affected zone during wire bonding
- SUN Li-ning(孙立宁), LIU Yue-tao(刘曰涛), LIU Yan-jie(刘延杰)
- 37
- Temperature and stress fields of multi-track laser cladding
- ZHAO Hong-yun (赵洪运), ZHANG Hong-tao(张洪涛), XU Chun-hua(徐春华), YANG Xian-qun(杨贤群)
- 38
- An evaluation analysis method for corrosion morphology
characterization based on Gaussian filter - ZHANG Peng (张 鹏), GUO Bin (郭 斌), CHENG Shu-kang (程树康)
- 39
- Effect of thickness and grain size on material behavior in micro-bending
- SHAN De-bin(单德彬), WANG Chun-ju(王春举), GUO Bin(郭 斌), WANG Xin-wei(汪鑫伟)
- 40
- Effects of specimen size on flow stress of micro rod specimen
- WANG Chun-ju(王春举), GUO Bin(郭 斌), SHAN De-bin(单德彬), SUN Li-ning(孙立宁)
- 41
- Flow stress and tribology size effects in scaled down cylinder compression
- GUO Bin(郭 斌), GONG Feng(龚 峰), WANG Chun-ju(王春举), SHAN De-bin(单德彬)
- 42
- Micro precision casting based on investment casting for micro structures with high aspect ratio
- YANG Chuang(杨 闯), LI Bang-sheng(李邦盛), REN Ming-xing(任明星), FU Heng-zhi(傅恒志)
- 43
- Surface finish of micro punch with ion beam irradiation
- XU Jie(徐 杰), WANG Chun-ju(王春举), GUO Bin(郭 斌),
SHAN De-bin(单德彬), Y. SUGIYAMA, S. ONO
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9