ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 10 No. 2 April 2000
- 1
- Correlation of seawater corrosion and processing of Cu-Ni alloy tubes①
- ZHU Xiao-long(朱小龙)
- 2
- Microstructures and mechanical properties of2014aluminium alloy
forgings made by a new process① - ZHANG Xin-ming(张新明), SONG Min(宋 日文),
ZHOU Zhuo-ping(周卓平), ZENG Su-min(曾苏民)
- 3
- Influence of B2ordered structure on deformation texture①
- MAO Wei-min(毛卫民), ZHU Guo-hui(朱国辉), ZHAO Zi-su(赵子苏), YU Yong-ning(余永宁)
- 4
- HREM study on stacking structure of SiGe/Si infrared detector①
- LIU An-sheng(刘安生), LIU Zheng(刘 峥), SHAO Bei-ling(邵贝羚), WANG Jing(王 敬)
- 5
- Computer program for equilibrium calculation and diffusion simulation①
- JIANG Chao(蒋 超), JIN Zhan-peng(金展鹏)
- 6
- Effect of minor boron addition on mechanical properties of
wrought TiAl alloy① - WANG Yu(王 瑜), LIN Dong-liang(林栋梁), Chi C.LAW
- 7
- Fretting wear behavior of nitrogen implanted Zircaloy-4alloy①
- TANG Guo-yi(唐国翌), Jeon G. Han, Byung H. Choi, W. Kim
- 8
- Synthesis and characteristics of W-Ni-Fe nano-composite powders
prepared by mechanical alloying① - QU Xuan-hui(曲选辉), FAN Jing-lian(范景莲), LI Yi-min(李益民), HUANG Bai-yun(黄伯云)
- 9
- Location of fluorine atoms and mechanism of improving
superconducting properties with F-doped in YBaCuO series① - DENG Hui-qiu(邓辉球), GAO Xiao-hui(高孝恢), WANG Xiao-gang(王小刚), ZHAO Li-hua(赵立华)
- 10
- Microstructural evolution of a forged TiAl based alloy
during heat treatment at subtransus temperature① - TANG Jian-cheng(唐建成), HUANG Bai-yun(黄伯云),
LIU Wen-sheng(刘文胜), HE Yue-hui(贺跃辉)
- 11
- Effects of technological parameters on microstructures and
properties of in situ TiCp/Fe composites① - YAN You-wei(严有为), WEI Bo-kang(魏伯康),
FU Zheng-yi(傅正义), LIN Han-tong(林汉同), YUAN Run-zhang(袁润章)
- 12
- Non-dendritic structural7075aluminum alloy by
liquidus cast and its semi-solid compression behavior① - LIU Dan(刘 丹), CUI Jian-zhong(崔建忠), XIA Ke-nong(夏克农)
- 13
- Preparation of large size aluminium alloy cylindrical
preforms by multi-layer spray deposition① - KANG Zhi-tao(康智涛), LI Li-li(李历历), CHEN Zhen-hua(陈振华),
YUAN Wu-hua(袁武华), FU Ding-fa(傅定发), ZHOU Duo-san(周多三)
- 14
- Effect of low temperature treatment on tensile yield strength of
SiCw/6061Al alloy composites① - JIANG Chuan-hai(姜传海), WANG De-zun(王德尊),
ZHANG Wen-long(张文龙), YAO Zhong-kai(姚忠凯)
- 15
- Effects of graphite on Zn-Sb alloys as anode
materials for lithium-ion batteries① - L Chun-ping(吕春萍), ZHAO Xin-bing(赵新兵),
CAO Gao-shao(曹高劭), ZHU Tie-jun(朱铁军)
- 16
- Fabrication of high strength conductivity submicron
crystalline Cu-5%Cr alloy by mechanical alloying① - HU Lian-xi(胡连喜), WANG Xiao-lin(王晓林), WANG Er-de(王尔德)
- 17
- Artificial neural networks in steel-mushy aluminum pressing bonding①
- ZHANG Peng(张 鹏), DU Yun-hui(杜云慧), REN Xue-ping(任学平),
LIU Han-wu(刘汉武), CUI Jian-zhong(崔建忠), BA Li-min(巴立民)
- 18
- Eigen theory of elastic mechanics for anisotropic solids①
- GUO Shao-hua(郭少华)
- 19
- Amorphous structure in a laser clad Ni-Cr-Al coating on Al-Si alloy①
- LIANG Gong-ying(梁工英), WONG Tsun-Tat(黄俊达),
SU Jun-yi(苏俊义), WOO Chung-Ho(胡仲豪)
- 20
- Corrosion behaviour of aluminium-magnesium alloys in molten sodium①
- LI Xi-jiang(李细江), RAO Xiong(饶 雄),
ZHANG Di(张 荻), SI Peng-cheng(司鹏程)
- 21
- Influence of grain size on mechanical properties of
isostatically pressed beryllium materials① - ZHONG Jing-ming(钟景明), WANG Zhan-hong(王战宏),
NIE Da-jun(聂大钧), MIN Xue-ren(闵学仁), WANG Xue-ze(王学泽),
FU Xiao-xu(付晓旭), WANG Ling-sen(王零森)
- 22
- Electron theory analysis on Ti-6Al-4V and Au-8Pd-10Pt alloys①
- L Yu-peng(吕宇鹏),, ZHU Rui-fu(朱瑞富), LEI Ting-quan(雷廷权),
LI Shi-tong(李士同), MA Quan-sheng(马泉生), LI Mu-sen(李木森), CHAO Zhi-qiang(朝志强)
- 23
- Effects of RE on microstructure and properties of
AZ91magnesium alloy① - WANG Qu-dong(王渠东), LU Yi-zhen(吕宜振),
ZENG Xiao-qin(曾小勤), DING Wen-jiang(丁文江), ZHU Yan-ping(朱燕萍)
- 24
- Separation of inclusions from liquid metal contained in a
triangle/square pipe by travelling magnetic field① - ZHONG Yun-bo(钟云波), REN Zhong-ming(任忠鸣),
DENG Kang(邓 康), JIANG Guo-chang(蒋国昌), XU Kuang-di(徐匡迪)
- 25
- Electrolytic preparation of Al-Ca master alloy on liquid Al cathode①
- YANG Bao-gang(杨宝刚), QIU Zhu-xian(邱竹贤), GAO Bing-liang(高炳亮)
- 26
- Leaching behavior of butanedionedioxime as gold ligand①
- LI De-liang(李德良), HUANG Nian-dong(黄念东), WANG Dian-zuo(王淀佐)
- 27
- Galvanic effects on electrochemical behaviors of bare surface of304stainless steel①
- SUN Dong-bai(孙冬柏), LI Tao(李 涛), YU Hong-ying(俞宏英), YANG De-jun(杨德钧)
- 28
- Preparation of zirconia-alumina powder by co-precipitation①
- LI Xiao-bin(李小斌), ZHOU Qiu-sheng(周秋生), PENG Zhi-hong(彭志宏),
LIU Gui-hua(刘桂华), Stuart Blackburn, Clive Ponton
- 29
- Kinetics of absorbing hydrogen of Al melt①
- LI Pei-jie(李培杰), , ZENG Da-ben(曾大本), JIA Jun(贾 均), LI Qing-chun(李庆春)
- 30
- Preparation of clarificant for glass from As-Sb dust①
- GUO Bing-kun(郭炳昆), LI Xin-hai(李新海), WANG Hai-quan(王海全),
CHEN Wen-mi(陈文汩), LIU Li-ying(刘丽英)
- 31
- Treatment of cadmium dust with two-stage leaching process①
- WANG De-quan(王德全), JIANG Lan(姜 澜), LIN Mao-shen(林茂森)
- 32
- Controlled source time-domain electromagnetic methods for
seafloor electric conductivity mapping① - YANG Jian-wen, R.N.Edwards
- 33
- Penetration and impact resistance of PDC cutters inclined at
different attack angles① - LI Xi-bing(李夕兵), , D.A.Summers, G.Rupert, J.Tyler
- 34
- Data perturbation analysis of a linear model①
- JIN Feng-xiang(靳奉祥), Michel Mayoud,
LU Xiu-shan(卢秀山), Jean-Pierre Quesnel
- 35
- Chaos dynamic characteristics during mine fires①
- ZHONG Mao-hua(钟茂华), CHEN Bao-zhi(陈宝智),
FAN Wei-cheng(范维澄), WANG Qing-an(王清安)
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9