Vol. 10/No. 4/August 2000 - TNMSC

ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 10 No. 4 August 2000

1: Phase transformation of fully lamellar γ-TiAl alloys inα+γfield①; CAO Guo-xin(曹国鑫), LIN Jian-guo(林建国),
ZHANG Yong-gang(张永刚), CHEN Chang-qi(陈昌麒)

2: Isothermal solidification behavior of typical
Ni3Al base superalloy IC6①; WANG Xiao-ping(汪小平), ZHENG Yun-rong(郑运荣), XIAO Cheng-bo(肖程波),
WANG Bei-lei(王蓓蕾), HAN Ya-fang(韩雅芳)

3: Mechanical properties of rapidly solidified Al-Ti alloys
after thermal exposure①; WU Jin-ming(吴进明), ZHENG Shi-lie(郑史烈), YUAN Jun(袁　俊),
LI Zhi-zhang(李志章), ZENG Yue-wu(曾跃武), JI Zhen-guo(季振国)

4: Mechanical properties of hypereutectic Al-Si alloy by semisolid processing①; LI Shu-suo(李树索),, ZHAO Ai-min(赵爱民), MAO Wei-min(毛卫民), ZHONG Xue-you(钟雪友)

5: Effect of electric current on stability of solidification interface morphology①; CHANG Guo-wei(常国威),, YUAN Jun-ping(袁军平), WANG Zi-dong(王自东),
WU Chun-jing(吴春京), WANG Xin-hua(王新华), HU Han-qi(胡汉起)

6: Simulation and control model for interactions among process parameters of directional solidification continuous casting①; PENG Li-ming(彭立明), MAO Xie-min(毛协民), XU Kuang-di(徐匡迪)

7: Densification abnormality in reactive hot pressing of Ti and Al elemental powders①; LIU Yong(刘　咏), HUANG Bai-yun(黄伯云), HE Yue-hui(贺跃辉), ZHOU Ke-chao(周科朝)

8: Morphology and growth mechanism of borides in Ti-48Al+B alloys①; LI Zhen-xi(李臻熙), CAO Chun-xiao(曹春晓)

9: Preparation of heat-resistant aluminum alloy pipe blanks by
multi-layer spray deposition①; YUAN Wu-hua(袁武华), CHEN Zhen-hua(陈振华),HUANG Pei-yun(黄培云)

10: Simulation and prediction of microstructure in hot forming of metals①; CHEN Hui-qin(陈慧琴), ZHANG Qiao-li(张巧丽), LIU Jian-sheng(刘建生), GUO Hui-guang(郭会光)

11: Tensile and creep properties of Mg-9Al based alloys containing bismuth①; YUAN Guang-yin(袁广银), SUN Yang-shan(孙扬善), ZHANG Wei-min(张为民), SUN Jian-rong(孙建荣)

12: Development of wax-oil-polyethylene binder for
Fe-2Ni powder injection molding①; LI Song-lin(李松林), HUANG Bai-yun(黄伯云), LI Yi-min(李益民), QU Xuan-hui(曲选辉)

13: Laser surface coating of RE bioceramic layer on TC4①; GAO Jia-cheng(高家诚), ZHANG Ya-ping(张亚平),
WEN Jing(文　静), WANG Yong(王　勇)

14: Undercooling heredity of Cu70Ni30melt solidified in
non-catalytic nucleation coated mould①; GUO Xue-feng(郭学锋),, LIU Yong-chang(刘勇长),
YANG Gen-cang(杨根仓), XING Jian-dong(邢建东)

15: Effects of Ti and(or) Cu on microstructures and
magnetic properties of sintered Nd-Fe-B magnets①; SONG Xiao-ping(宋晓平), YANG Sen(杨　森), WANG Xian-hui(王献辉), SUN Zhan-bo(孙占波)

16: Pulsed DC plasma enhanced chemical vapor deposited
TiN/Ti(C,N) multilayer coatings①; MA Sheng-li(马胜利), LI Yan-huai(李雁淮), NAN Jun-ma(南俊马), XU Ke-wei(徐可为)

17: Tribological behavior of different films
on Ti-6Al-4V alloy prepared by plasma-based ion implantation①; JI Hong-bing(季红兵), XIA Li-fang(夏立芳), MA Xin-xin(马欣新), SUN Yue(孙　跃)

18: Tribological stability of particle reinforced
aluminum matrix composites in braking①; WU Jun-hua(吴军华), ZHANG Guo-ding(张国定), WANG Wen-long(王文龙)

19: Emission spectra of microwave plasma and
MPCVD transparent diamond film①; ZHOU Jian(周　健), HE Wei(何　伟), YUAN Run-zhang(袁润章),
JIANG De-sheng(姜德生), WANG Jian-hua(汪建华)

20: Hot pressing of hydroxyapatite(HA)-Ti
material and stability of HA①; CHU Cheng-lin(储成林), ZHU Jing-chuan(朱景川), YIN Zhong-da(尹钟大),
LI Ming-wei(李明伟), WANG Shi-dong(王世栋), XING Shu-zhong(邢树忠)

21: Degradation characteristics of
Ti/(IrO2+Ta2O5) coating anodes in H2SO4solution①; HU Ji-ming(胡吉明), WU Ji-xun(吴继勋), MENG Hui-min(孟惠民),
SUN Dong-bai(孙冬柏), ZHU Yan-rong(朱艳冗), YANG De-jun(杨德钧)

22: Preparation and mechanical properties of Si2N2O ceramics①; WANG Si-qing(王思青), YAN Yu-hua(阎玉华)

23: Separating titania from treated slag by gravity separation or flotation①; MA Jun-wei(马俊伟),, SUI Zhi-tong(隋智通), CHEN Bing-chen(陈炳辰)

24: Electric arc furnace dust non-isothermal reduction kinetics①; ZHANG Chuan-fu(张传福), PENG Bing(彭　兵), PENG Ji(彭　及),
J. Lobel, A. K. Janusz

25: Leaching kinetics of rare earth from black weathering mud
with hydrochloric acid①; CHI Ru-an(池汝安), ZHU Guo-cai(朱国才), TIAN Jun(田　君)

26: Electrochemical reaction mechanism of aqueous polysulfide solution①; YI Qing-feng(易清风), CHEN Qi-yuan(陈启元),
ZHOU Ji-hong(周继红), ZHANG Ping-min(张平民)

27: Effects of addition of rare earth on properties and
structures of Ni-W-B-SiC composite coatings①; GUO Zhong-cheng(郭忠诚), ZHAI Da-cheng(翟大成), YANG Xian-wan(杨显万)

28: Hydrothermal fluid circulation in
anisotropic permeable media associated with discrete fractures①; YANG Jian-wen(杨建文)

29: Experiment and mechanism of
dynamic drag reduction in pipeline transportation①; WU Ai-xiang(吴爱祥), GU De-sheng(古德生), HU Hua(胡　华)

30: Non-derivative solution to nonlinear dynamic optimal design of
class two for deformation network monitoring①; TAO Hua-xue(陶华学), GUO Jin-yun(郭金运)

31: Expert control strategy using neural networks for
electrolytic zinc process①; WU Min(吴　敏), TANG Zhao-hui(唐朝晖), GUI Wei-hua(桂卫华)

32: Intelligent modeling and optimization on time-sharing power
dispatching system for electrolytic zinc process①; WANG Ya-lin(王雅琳), GUI Wei-hua(桂卫华),
YANG Chun-hua(阳春华), HUANG Tai-song(黄泰松)

33: Hydraulic impactor with impact energy and frequency
adjusted independently and steplessly①; ZHU Jian-xin(朱建新), ZHAO Hong-qiang(赵宏强), GUO Yong(郭　勇), HE Qing-hua(何清华)

Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9