ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 10 No. 5 October 2000
- 1
- Control of Al content during ISM process of Nb3Al①
- GUO Jing-jie(郭景杰), LIU Gui-zhong(刘贵仲), SU Yan-qing(苏彦庆),
LIU Yuan(刘源), DING Hong-sheng(丁宏升), JIA Jun(贾均)
- 2
- Emission mechanism of Mo-Y2O3cathode①
- WANG Jin-shu(王金淑), ZHOU Mei-ling(周美玲), NIE Zuo-ren(聂祚仁),
ZHANG Jiu-xing(张久兴), LUO Feng-hua(罗丰华), ZUO Tie-yong(左铁镛)
- 3
- Mixed rare earth metal conversion coatings on2024alloy and
Al6061/SiCpmetal matrix composites① - YU Xing-wen(于兴文),CAO Chu-nan(曹楚南)
- 4
- Fracture behavior of lamellar structure in Ti-48Al-2Mn-2Nb alloy
produced by centrifugal spray deposition① - CHEN Wen-zhe(陈文哲), QIAN Kuang-wu(钱匡武), GU Hai-cheng(顾海澄)
- 5
- Technological investigation of electromagnetic casting for double-ingot①
- HAO Hai(郝 海), ZHANG Xing-guo(张兴国), HOU Xiao-guang(侯晓光),
CAO Zhi-qiang(曹志强), JIN Jun-ze(金俊泽)
- 6
- Surface modification for La1-xCex(NiCoMnAl)5hydride electrode by
hot charging in potassium borohydride solution① - WEN Ming-fen(文明芬),, CHEN Lian(陈 廉),, YU Bo(于 波),,
TONG Min(佟 敏), CHEN De-min(陈德民), TIAN Yan-wen(田彦文), ZHAI Yu-chun(翟玉春)
- 7
- In-situ crack propagation observation in fully lamellar Ti-49%Al alloy①
- LU Yong-hao(陆永浩),, ZHANG Yong-gang(张永刚), QIAO Li-jie(乔利杰),
WANG Yan-bin(王燕斌), CHEN Chang-qi(陈昌鹿其), CHU Wu-yang(褚武扬)
- 8
- Effect of heat treatment on shape memory properties
of ductile CuAlMn alloys① - MO Hua-qiang(莫华强), ZENG Guang-ting(曾光廷), HUO Yong-zhong(霍永忠),
ZU Xiao-tao(祖小涛), TAN Li-xin(谭立新)
- 9
- Effect of Al and Al/Mo addition on microstructure and
magnetic properties of sintered Nd22Fe71B7magnets① - YANG Sen(杨 森), SONG Xiao-ping(宋晓平), WANG Xian-hui(王献辉),
SUN Zhan-bo(孙占波), SUN Jun(孙 军)
- 10
- Mechanism of reduction of columnar dendrite spacing in
unidirectional solidification caused by electric current passing
through solid-liquid interface① - CHANG Guo-wei(常国威),,YUAN Jun-ping(袁军平), WANG Zi-dong(王自东),
WU Chun-jing(吴春京), WANG Xin-hua(王新华), HU Han-qi(胡汉起)
- 11
- Numerical model of solidification process in binary Al-Fe alloy
under centrifugal casting① - LI Rong-de(李荣德), MA Bing(马 冰), XU Yu-qiao(徐玉桥)
- 12
- Characterization of magnetron sputtering TiB2and Ti-B-N thin films①
- ZHANG Tong-jun(张同俊), M. S. Wong, W. D. Sproul, Y. W. Chung
- 13
- Interfacial bonding strength of Al-Pb bearing alloy strips and
hot dip aluminized steel sheets by hot rolling① - LIU Yong-bing(刘勇兵), AN Jian(安 健), SUN Da-ren(孙大仁)
- 14
- Numerical simulation of cup hydrodynamic deep drawing①
- LANG Li-hui(郎利辉), KANG Da-chang(康达昌), ZHANG Shi-hong(张士宏),
DAI Kun(戴 昆), WANG Zhong-ren(王仲仁), YUAN Shi-jian(苑世剑)
- 15
- Development of embedded-atom potentials and prediction of
properties for binary Ti-V① - SHANG Shun-li(商顺利), LIU Yu-qin(刘玉芹),
BAI Ke-wu(白克武), SHEN Jian-yun(沈剑韵), WANG Xi-zhe(王希哲)
- 16
- Rheological properties of feedstocks for powder extrusion molding①
- ZHOU Ji-cheng(周继承), HUANG Bai-yun(黄伯云), WU En-xi(吴恩熙)
- 17
- Prediction of thermodynamic properties for
multicomponent system with Chou model① - ZHEN Qiang(甄 强), BAO Hong(包 宏), WANG Fu-ming(王福明), LI Wen-chao(李文超)
- 18
- Porosity of aluminum alloy in lost foam casting process①
- WU Guo-hua(吴国华), LUO Ji-rong(罗吉荣), XIE Min(谢 敏)
- 19
- Numerical simulation of thermal stress field for
die casting dies of aluminum alloy① - NING Zhi-liang(宁志良), ZHOU Bi-de(周彼德), XUE Xiang(薛 祥), ZHANG Chun-hui(张春晖)
- 20
- Formation regularity of phases in nanometer powders of
Al-Fe alloy prepared by gas evaporation① - YAN Hong-ge(严红革), CHEN Zhen-hua(陈振华), KANG Zhi-tao(康智涛),
YUAN Wu-hua(袁武华), SUN Yi(孙 亦), HUANG Pei-yun(黄培云)
- 21
- FEM simulation of extrusion of3003alloy tubes①
- LIU Lang-fei(刘浪飞), PENG Da-shu(彭大暑), JIN Xiang-yun(靳湘云)
- 22
- Low-Co rare-earth-based hydrogen storage alloy①
- LI Quan-an(李全安), SANG Ge(桑 革), LI Jian-wen(李建文),
CHEN Yun-gui(陈云贵), TU Ming-jing(涂铭旌), LI Ning(李 宁)
- 23
- Deformation mechanism of tension of2024Al alloy at semi-solid state①
- DU Zhi-ming(杜之明), LUO Shou-jing(罗守靖), SUN Jia-kuan(孙家宽)
- 24
- Feature of flow stress of aluminum sheet used for
can during hot compression① - FU Gao-sheng(傅高升),, QIAN Kuang-wu(钱匡武),,
CHEN Wen-zhe(陈文哲), KANG Ji-xing(康积行)
- 25
- Regularities of formability of intermediate compounds in
binary molten salt systems① - WANG Xue-ye(王学业), SONG Huang(宋 钅皇)
- 26
- Existence forms of water in solid-liquid systems①
- XING Jun(刑 军), LIU Zheng-ning(刘正宁), LI Xin-yue(李昕跃), LIU Rong(刘 荣),
HUANG Hui(黄 慧), XU Hai-yan(徐海燕), XU Ji-run(徐继润),REN Shun-nian(任顺年)
- 27
- Surface performance of carboxy methyl amylopectin for
improving strength of pellet① - QIU Guan-zhou(邱冠周), LI Hong-xu(李宏煦), JIANG Tao(姜 涛)
- 28
- Behavior of surface action between ethyl thiourea and chalcopyrite①
- JIANG Yu-ren(蒋玉仁), XUE Yu-lan(薛玉兰)
- 29
- Synthesis of mono(1-chloride-2-hydroxy propyl)phosphate and
antimony mono(1-chloride-2-hydroxy propyl)phosphate① - LIU You-nian(刘又年), SHU Wan-gen(舒万艮), ZENG Dong-ming(曾冬铭), HUANG Ke-long(黄可龙)
- 30
- Kinetic mechanism of anodic oxidation of tantalum in nitrate melts①
- ZHANG De-yuan(张德元),, LU De-ping(陆德平), LI Fang(李 放),
CAI Li(蔡 莉), XU Lan-ping(许兰萍), LIN Qin(林 勤)
- 31
- Expert fault diagnosis system for leaching process in
zinc hydrometallurgy① - WU Min(吴 敏), TANG Zhao-hui(唐朝晖), GUI Wei-hua(桂卫华)
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9