ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 17 Sepecial 1 November 2007
Phase Diagrams and Computational Materials Science
- 1
- Role of misfit in precipitation crystallography in non-ferrous metals
- GU Xin-fu(顾新福), ZHANG Wen-zheng (张文征), ZHANG Min(张 敏), YE Fei(叶 飞)
- 2
- Isothermal section of Mg-Zn-La system in Mg-rich corner at 400 ℃
- HUANG Ming-li(黄明丽), LI Hong-xiao(李洪晓), REN Yu-ping(任玉平),
DING Hua(丁 桦), HAO Shi-ming(郝士明), CHEN Hui(陈 辉)<
- 3
- Calculation of Cu-rich part of Cu-Ni-Si phase diagram
- LU De-ping(陆德平), WANG Jun(王 俊), A. Atrens, ZOU Xing-quan(邹兴权),
LU Lei(陆 磊) , SUN Bao-de(孙宝德)
- 4
- Solidification simulation of Al-Mg-Er alloys using CALPHAD method
- ZHANG Li-gang(章立钢), LIU Li-bin(刘立斌), HUANG Guo-xing(黄国幸), JIA Bing-ran(贾兵然)
- 5
- Determination and application of stress-based forming limit diagram in
aluminum tube hydroforming - ZHOU Lin (周 林), XUE Ke-min (薛克敏), LI Ping (李 萍)
- 6
- Thermodynamic analysis of Ti powder synthesized by
SHS thermitreaction - ZHANG Peng-lin(张鹏林), XIA Tian-dong(夏天东), ZHANG Guo-dong(张国栋),
YAN Li-jing(闫丽静), ZHAO Wen-jun(赵文军)
- 7
- Non-steady FE analysis on porthole dies extrusion of
aluminum harmonica-shaped tube - CHENG Lei(程 磊), XIE Shui-sheng(谢水生), HUANG Guo-jie(黄国杰),
WU Peng-yue(吴朋越), HE You-feng(和优锋)
- 8
- Cup-drawing formation of steel sheet with nickel coating by
finite element method - Key Laboratory of Low Dimensional Materials and Application Technology, Ministry of Education,
Faculty of Material and Photoelectronic Physics, Xiangtan University, Xiangtan , China
- 9
- Numerical simulation of splat formation dynamics in plasma spray forming
- FANG Jian-cheng(方建成), WANG Li(王 莉), XU Wen-ji(徐文骥), ZHAO Zi-yu(赵紫玉)
- 10
- Nonclassical constitutive model involving void evolution of
casting magnesium alloy - CHEN Bin(陈 斌), PENG Xiang-he(彭向和), FAN Jing-hong(范镜泓), SUN Shi-tao(孙士涛)
- 11
- An accurate theoretical study on intrinsic defect energetics in rutile TiO2
- MA Xin-guo(马新国), JIANG Jian-jun(江建军), LIANG Pei(梁 培), WANG Juan(王 娟)
Characterization of Microstructures and Properties
- 12
- EBSD characterization of recrystallization microstructure of cold-swaged Ti-23Nb-0.7Ta-2Zr-O alloy
- GUO Wen-yuan(郭文渊), SUN Jian(孙 坚), LI Xiao-ling(李晓玲), WU Jian-sheng(吴建生)
- 13
- High-temperature wear behaviors of MoSi2 under different loads
- HU Xiao-ping(胡小平), TAN Wei-cheng(谭伟成),TANG Si-wen(唐思文),
ZHANG Hou-an(张厚安), HUANG Zhi-chu(黄之初)
- 14
- Evolution of domain structure and frequency effect on
ferroelectric properties in BIT ferroelectrics - ZHENG Xue-jun(郑学军), LU Jia(卢 佳), ZHOU Yi-chun(周益春),
WU Bo(吴 波), CHEN Yi-qiang(陈义强)
- 15
- Microstructure evolution of nanostructured Ni3Al during annealing
- REN Jiang-wei(任江伟), SHAN Ai-dang(单爱党), LIU Jun-liang(刘俊亮),
ZHANG Jun-bao(张俊宝), SONG Hong-wei(宋洪伟)
- 16
- Effect of annealing parameter on microstructure and
magnetic properties of cold rolled non-oriented electrical steel - LI Min(李 敏), XIAO Yu-de(肖于德), WANG Wei(王 伟), ZHOU Juan(周 娟),
WU Guang-liang(吴光亮), PENG Yue-ming(彭跃明)
- 17
- HIP diffusion bonding of P/M titanium alloy Ti-6Al-4V
and stainless steel 1Cr18Ni9Ti - LANG Ze-bao(郎泽保), WANG Liang(王 亮), ZHANG Xu-hu(张绪虎)
- 18
- Valence electron structures and properties of Ni-based corrosion resistant alloy
- YANG Rui-cheng(杨瑞成), SHU Jun(舒 俊), CHEN Kui(陈 奎), WANG Kai-xuan(王凯旋)
- 19
- Aging characteristics of new metastable beta titanium alloy
- GE Peng(葛 鹏), ZHOU Wei(周 伟), ZHAO Yong-qing(赵永庆), ZHOU Lian(周 廉)
- 20
- Effect of microstructure on impact toughness of TC21 alloy
- CHEN Jun(陈 军), ZHAO Yong-qing(赵永庆), ZENG Wei-dong(曾卫东)
- 21
- Tribological properties of nickel-graphite composite against different counterfaces at elevated temperatures
- LI Jian-liang(李建亮), XIONG Dang-sheng(熊党生), WAN Yi(万 轶)
- 22
- Mechanical and friction properties of aluminum and titanium reinforced Ni-based self-lubricating composite
- LI Jian-liang(李建亮), XIONG Dang-sheng(熊党生)
- 23
- Nature of magnetic and electronic structure of double
perovskite A2FeMoO6 - LIANG Pei(梁 培), JIANG Jian-jun(江建军), MA Xin-guo(马新国), TIAN Bin(田 斌)
- 24
- Fabrication and wear behavior of CNT/Al composites
- JIANG Jin-long(姜金龙), WANG Hai-zhong(王海忠), YANG hua(杨 华), XU Jin-cheng(徐金城)
- 25
- Effect of particle size and agglomeration of TiO2 on synthesis and electrochemical properties of Li4Ti5O12
- WU Le(伍 乐), KAN Su-rong(阚素荣)&#;, LU Shi-gang(卢世刚),
ZHANG Xiang-jun(张向军), JIN Wei-hua(金维华)
- 26
- Effect of cooling rate and composition on microstructures and
properties of Zn-Mg alloys - WANG Xiang(王 香), LU Hong-mei(陆红梅), LI Xin-lin(李新林),
LI Li(李 莉), ZHENG Yu-feng(郑玉峰)
- 27
- Micro-analysis of explosive cladding interface of Nb/304L
- WU Jin-ping(吴金平), YANG Ying-li(杨英丽), ZHAO Heng-zhang(赵恒章), YIN Jing-ou(殷京瓯),
LIN Qiao(林 桥), ZHAO Bin(赵 彬), GUO Di-zi(郭荻子), SHU Hang-biao(苏航标)
Behaviors of Corrosion, Fatigue and Fracture of Ma
- 29
- Oxidation behavior of single crystal TMS-82+ superalloy in air
- WU Ying(武 英), SONG Gui-ming(宋桂明), ZHOU Shao-xiong(周少雄), T. NARITA
- 30
- Effect of pre-strain on fatigue crack growth of 2E12 aluminum alloy
- . School of Materials Science and Engineering, Central South University, Changsha , China;
. Key Laboratory of Non-Ferrous Metals, Material Science and engineering,
Ministry of E
- 31
- Oxidation mechanisms of C-SiC-TaC-C composites prepared by
chemical vapor infiltration - State Key Laboratory of Powder Metallurgy, Central South University, Changsha , China
- 32
- Magnesium stress corrosion cracking
- N. Winzer, A. Atrens, W. Dietzel, G. Song, K. U. Kainer
- 33
- Corrosion and high-temperature oxidation of AM60 magnesium alloy
- LU Sheng(芦 笙), ZHOU Xiao-yan(周晓燕), CHEN Jing(陈 静), HOU Zhi-dan(侯志丹)
- 34
- Corrosion behavior of B30 Cu-Ni alloy and anti-corrosion coating in
marine environment - LI Qing-fen(李庆芬), LI Chun-hui(李春辉) , XU Li-kun (许立坤)，LIU Guang-zhou(刘光洲)
- 35
- Electrochemical behavior of magnesium alloys in simulated body fluids
- ZENG Rong-chang(曾荣昌), CHEN Jun(陈 君), W. Dietzel, N. Hort, K.U. Kainer
- 36
- Effect of Cr on oxidation of Ni-xAl alloy
- ZHANG Xue-jun(张学军), GAO Chun-xiang(高春香), WANG Lei(王 蕾), NIU Yan(牛 焱)
- 37
- Corrosion behavior of ternary Fe-15Cu-5Al alloy in pure oxygen at 1 000 ℃
- YANG Gan-lan(杨干兰), XIANG Jun-huai(向军淮), ZHANG Wen-hua(张文华),
ZHAO Qiong(赵 琼), BAI Ling-yun(白凌云)
- 38
- Effect of temperature on oxidation behavior of
ternary Fe-15Cu-5Al alloy in pure oxygen - XIANG Jun-huai(向军淮), ZHAO Qiong(赵 琼), ZHANG Wen-hua(张文华)
- 39
- Electrochemical techniques for monitoring stress corrosion cracking of
Type 40Cr steel in acidified chloride solution - AN Li-juan(安丽娟), LI Qing-fen(李庆芬)
- 40
- Corrosion characteristics of copper in magnetized sea water
- ZHANG Peng(张 鹏), GUO Bin(郭 斌), JIN Yong-ping(金永平), CHENG Shu-kang(程树康)
- 41
- pH value in simulated occluded corrosion cell for magnesium alloys
- ZENG Rong-chang(曾荣昌), CHEN Jun(陈 君), KE Wei(柯 伟),
Han En-hou(韩恩厚), W. Dietzel
- 42
- Morphology and corrosion resistance of composite coatings obtained by phosphating and molybdate post-sealing on galvanized steel
- XU Yu-ye(徐玉野), LIN Bi-lan(林碧兰), LU Jin-tang(卢锦堂)
- 43
- Fatigue behaviour of pre-strain 7B04-T7451 aluminum alloy
- JIANG Feng(姜 锋), JIAN Hai-gen(蹇海根), YIN Zhi-min(尹志民), HE Zhen-bo(何振波)
- 44
- Effect of stress ratio on fatigue crack growth of Ti40 alloy
- WU Huan(吴 欢), ZHAO Yong-qing(赵永庆), ZENG Wei-dong(曾卫东)
- 45
- Corrosion and fatigue in micro-sized Ni cantilever beams
- ZHANG Qiang(张 强), GUO Xing-peng(郭兴蓬), LIU Yu(刘 昱),
DAI Neng-li(戴能利), LU Pei-xiang(陆培祥)
- 46
- Fatigue properties of pack ply-rolling Ti-6Al-4V alloy sheets
- HONG Quan(洪 权), YANG Guan-jun(杨冠军), ZHAO Yong-qing(赵永庆),
QI Yun-lian(戚运莲), GUO Ping(郭 萍)
- 47
- Influence of viscous medium temperature distribution on sheet fracture in viscous pressure forming at warm temperature
- LIU Jian-guang(刘建光), WANG Zhong-jin(王忠金), ZHANG Xin(张 鑫), LI Yi(李 毅)
- 48
- Effect of heating-rate on failure temperature of pre-loaded brass H62
- CHEN Bin(陈 斌), PENG Xiang-he(彭向和), FAN Jing-hong(范镜泓), SUN Shi-tao(孙士涛)
- 49
- Crack propagation of Mg-Li alloys by impact load
- QU Zhi-ming(曲志明), LIANG Xiao-ying(梁晓颖), ZHOU Xin-quan(周心权), SHI San-yuan(史三元)
Aluminum Alloys and Magnesium Alloys
- 50
- Microstructure and mechanical properties of Al-Fe-V-Si/SiCp composites
- CHEN Zhen-hua(陈振华), HE Yi-qiang(贺毅强), YAN Hong-ge(严红革),
HAO Liang(郝 亮), CHEN Zhi-gang(陈志钢), CHEN Gang(陈 刚)
- 51
- Effects of minor Sc on microstructure and mechanical properties of Al-Zn-Mg-Zr alloy welded joint
- XIAO Jing(肖 静), YIN Zhi-min(尹志民), LEI Xue-feng(雷学锋),
JIANG Feng(姜 锋), NIE Bo(聂 波), HE Zhen-bo(何振波),
- 52
- Constituents evolution of LFEC 7050 aluminum alloy during processing
- ZUO Yu-bo(左玉波), WANG Shuang(王 爽), ZHAO Zhi-hao(赵志浩),
CUI Jian-zhong(崔建忠), ZHANG Hai-tao(张海涛), TU Gan-feng(涂赣峰)
- 53
- Theoretical analysis of texture evolution in cold rolling process of
single crystal aluminum - LÜ Cheng(吕 程), SI Liang-ying(司良英),
ZHU Hong-tao(朱洪涛), LIU Xiang-hua(刘相华), K. TIEU
- 54
- Tool-workpiece interaction and shear layer flow during
friction stir welding of aluminium alloys - Z. W. CHEN, S. CUI
- 55
- Effect of pre-aging on microstructure and properties of 2000 series
aluminum alloy for automotive body sheets - WANG Meng-jun(王孟君), HUANG Dian-yuan(黄电源), JIANG Hai-tao(姜海涛), REN Jie(任 杰)
- 56
- Microstructure and mechanical properties of Al-Cu-Mg-Ag alloyed with Ce
- LI Yun-tao(李云涛), LIU Zhi-yi(刘志义), ZHOU Jie(周 杰), XIA Qing-kun(夏卿坤)
- 57
- Hot deformation behavior of Al-Cu-Li-Mg-Zr alloy containing Zn and Mn
- CHEN Yong-lai(陈永来), LI Jin-feng(李劲风), LÜ Hong-jun(吕宏军), LI Shi-chen(李世晨),
ZHENG Zi-qiao(郑子樵), ZHANG Yu-wei(张宇伟
- 58
- Effect of particle size on mechanical properties of SiCp/5210 Al metal matrix composite
- YU Xiao-dong(于晓东), WANG Yang-wei(王扬卫), WANG Fu-chi(王富耻)
- 59
- Flow stress of 2197 Al-Li alloy during hot compression deformation
- WEI Xiu-yu(魏修宇), ZHENG Zi-qiao(郑子樵), FU Xin(付 欣), CHEN Qiu-ni(陈秋妮)
- 60
- Preparation of spray deposited aluminum alloy sheets via novel rolling technique
- ZHANG Hao(张 昊), CHEN Zhen-hua(陈振华), YAN Hong-ge(严红革),
CHEN Ding(陈 鼎), LI Wei(李 微)
- 61
- Mechanical behaviors of ZL109/Al2O3·SiO2 particle reinforced composites
- LI Yue-ying(李月英), CAO Zhan-yi(曹占义), LIU Yong-bing(刘勇兵)
- 62
- High cycle fatigue and fracture behavior of 2124-T851 aluminum alloy
- LI Xue(李 雪), YIN Zhi-min(尹志民), NIE Bo(聂 波),
ZHONG Li(钟 利), PAN Qing-lin(潘清林), JIANG Feng(姜
- 63
- Formation of Al-Ni master alloys using nickel anode
- CAO Da-li(曹大力), WANG Ji-kun(王吉坤), SHI Zhong-ning(石忠宁),
WANG Zhao-wen(王兆文), MA Lei(马 雷), WANG Hui-hua(王惠华)
- 64
- Phase transformation behavior in Al-Zn-Cu alloys by hammering
- CHEN Hui(陈 辉), ZHENG Xi-jian(郑夕健), LUO Ji-man(罗继曼), HAN Ze-guang(韩泽光)
- 65
- Effects of microalloying on grain refinement behaviors and hardness properties of wedge-shaped Al-Mg-Mn castings
- LIU En-ke(刘恩克), YANG Fu-bao(杨福宝), XU Jun(徐 骏), SHI Li-kai(石力开)
- 66
- Thermal explosion synthesis of aluminum matrix composites reinforced with TiC-TiB2 ceramic particulates
- ZOU Bing-lin(邹兵林), SHEN Ping(沈 平), JIANG Qi-chuan(姜启川)
- 67
- Effect of heat-treatment on microstructure and properties of SiC particulate-reinforced aluminum matrix composite
- SUN You-ping(孙有平), YAN Hong-ge(严红革), CHEN Zhen-hua(陈振华), ZHANG Hao(张 昊)
- 68
- Effect of tensile stress on microstructure evolution of
Al-Cu-Mg-Ag alloys - ZHOU Jie(周 杰), LIU Zhi-yi(刘志义), LI Yun-tao(李云涛),
- 69
- Thermal expansion and mechanical properties of
Al/Si composites fabricated by pressure infiltration - ZHENG Jing(郑 晶), SONG Wen-juan(宋文娟), MA Guang(马 光), JIA Zhi-hua(贾志华)
- 70
- Effect of second phase precipitation behavior on
mechanical properties of casting Al-Cu alloys - ZHAO Wen-gui(赵文贵), JIANG Qi-chuan(姜启川), WANG Jin-guo(王金国),
LI Yong(李 永), HOU Jing-qi(侯景琦)
- 71
- Hot-compression constitutive relation of as-cast AZ31 magnesium alloy
- SHI Ti(史 褆), YU Kun(余 琨), LI Wen-xian(黎文献),
WANG Ri-chu(王日初), WANG Xiao-yan(王晓艳), CAI Zhi-yong(蔡志勇)
- 72
- Partial melting and re-solidification in partially melted zone during
gas tungsten arc welding of AZ91 cast alloy - T. P. ZHU, Z. W. CHEN, W. GAO
- 73
- Deformation behavior of AZ31 magnesium alloy at
different strain rates and temperatures - TAN Cheng-wen(谭成文), XU Shan-na(胥珊娜), WANG Lu(王 鲁), CHEN Zhi-yong(陈志永),
WANG Fu-chi(王富耻), CAI Hong-nian(才鸿年)
- 74
- Microstructure and mechanical properties of Mg-Zn-Gd-based alloys strengthened with quasicrystal and Laves phase
- LIU Yong(刘 勇), YUAN Guang-yin(袁广银),LU Chen(卢 晨), DING Wen-jiang(丁文江)
- 75
- Effect of process parameters on density of magnesium alloy parts by low-pressure expendable pattern casting
- LI Ji-qiang(李继强), FAN Zi-tian(樊自田), DONG Xuan-pu(董选普)
- 76
- Effects of heat treatment and plastic deformation on structure and properties of Mg-9Al-1.2Nd-0.45Y-0.7Zn Mg alloy
- LI Yong-jun(李永军), ZHANG Kui(张 奎), LI Xing-gang(李兴刚),
MI Xu-jun(米绪军), XIONG Bai-qing(熊柏青), HU Chun-li(胡春利)
- 77
- Influence of solidification conditions on mechanical properties of Mg-10Gd-3Y-0.5Zr magnesium alloy
- LIN Jin-bao(林金保), PENG Li-ming(彭立明),WANG Qu-dong(王渠东),
ZHOU Yang(周 阳), DING Wen-jiang(丁文江)
- 78
- Superplasticity of Mg-Gd-Y alloy in tensile test at
elevated temperature - XIAO Yang(肖 阳), ZHANG Xin-ming(张新明), DENG Yun-lai(邓运来), FAN Xiao-hui(范晓慧)
- 79
- Influence of Ce on microstructure and mechanical properties
of LA141 alloys - LIU Bin(刘 滨), ZHANG Mi-lin(张密林), WU Rui-zhi(巫瑞智)
- 80
- Microstructure and mechanical properties of Mg-xLi-3Al-1Ce alloys
- ZHANG Mi-lin(张密林), WU Rui-zhi(巫瑞智), WANG Tao(王 涛),
LIU Bin(刘 滨), NIU Zhong-yi(牛中毅)
- 81
- Melting behavior of magnesium alloy chips in thixomolding process
- CUI Xiao-peng(崔晓鹏), LIU Hai-feng(刘海峰), LIU Yong-bing(刘勇兵)
- 82
- Influence of high intensity ultrasonic vibration on microstructure of
in-situ synthesized Mg2Si/Mg composites - CHEN Ke(陈 可), LI Zi-quan(李子全), ZHOU Heng-zhi(周衡志), WANG Wei(王 伟)
- 83
- Microstructures and properties of reciprocating extruded
as-cast ZK60 magnesium alloy - JIANG Ting(姜 婷), GUO Xue-feng(郭学锋), MA Guang(马 光)
- 84
- Hot compression deformation behavior of MB26 magnesium alloy
- DU Zhi-hui(杜志惠), ZHANG Xu-hu(张绪虎), FANG Xi-ya(方西亚),
ZHANG Xiao-juan(张晓娟), CHEN Yong-lai(陈永来), ZHANG Yu-wei(张宇玮)
- 85
- Different grain refinement mechanisms of minor zirconium and
cerium in magnesium alloys - YU Kun(余 琨), LI Wen-xian(黎文献), WANG Ri-chu(王日初), ZHANG Shi-Jun(张世军)
- 86
- High strain rate superplasticity of AZ31 alloy
- ZHOU Hai-tao(周海涛), JIANG Yong-feng(蒋永锋),
ZHONG Jian-wei(钟建伟), ZHAO Zhong-kai(赵仲恺), LI Qing-bo(李庆波)
- 87
- Transformation of microstructure after modification of A390 alloy
- ZHANG Ying(张 英), YI Dan-qing(易丹青), LI Wang-xing(李旺兴),
REN Zhi-sen(任智森), ZHAO Qun(赵 群), ZHANG Jun-hong(张
- 88
- Aging characteristics and high temperature properties of Mg-9Gd-3Y-0.3Zr
- YAO Su-juan(姚素娟), YI Dan-qing(易丹青), YANG Sheng(杨 胜), LI Wang-xing(李旺兴)
- 89
- Effect of spray forming on evolution of microstructure and
mechanical behavior of Mg-9Al-1Zn alloy - YU Hong-yan(余红燕), HUANG Jin-feng(黄进峰), LI Yong-bing(李永兵),
CUI Hua(崔 华), HE Jian-ping(何建平), ZHANG Ji-shan(张
- 90
- mechanical properties of Mg-Gd alloy
- ZHANG Xiao-juan(张小娟), YI Dan-qing(易丹青), FANG Xi-ya(方西亚),
WANG Bin(王 斌), XIAO Lai-rong(肖来荣)
- 91
- Electrochemical co-deposition of magnesium based alloy from molten salts
- SUN Ning-lei(孙宁磊), REN Jia-lin(任甲林), LIU Heng-yang(刘恒阳),ZHU Hong-min(朱鸿民)
- 92
- Creep mechanism of Mg-Nd-Zn-Zr alloy at ambient temperature
- ZHONG Ying-ying(仲莹莹), WU Yi-ping(吴懿萍), XU Shu-fang(许树芳),
GUO Tian-cai(郭天才), ZHANG Xin-ming(张新明)
- 93
- Modification of primary Mg2Si in Mg-5Si alloys with Y2O3
- ZHENG Na(郑 娜), WANG Hui-yuan(王慧远), ZHAO Feng(赵 峰),
GU Zhen-hua(顾振华), LI Dong(李 栋), JIANG Qi-chuan(姜启川)
- 94
- Microstructure and mechanical properties of Mg-5.6Li-3.37Al-1.68Zn-1.14Ce alloy
- WANG Tao(王 涛), ZHANG Mi-lin(张密林), WU Rui-zhi(巫瑞智)
- 95
- Microstructure characterization and mechanical properties of Mg-9Li-5Al-1Zn-0.6RE alloy
- WU Rui-zhi(巫瑞智), ZHANG Mi-lin(张密林), WANG Tao(王 涛)
- 96
- Effect of Na2B4O7 on iron reduction in magnesium alloys AZ31 and AZ91
- WU Guo-hua(吴国华), GAO Hong-tao(高洪涛), WANG Wei(王 玮), DING Wen-jiang(丁文江)
- 97
- Interaction of crack with twins in hot-rolling AZ31 magnesium alloys during in-situ TEM straining experiments
- WU Luo-yi(吴落义), WU Cui-lan(伍翠兰), XIA Wei-jun(夏伟军), CHEN Zhen-hua(陈振华)
- 98
- Hereditary transmission of AZ91D magnesium alloy
- ZHAO Yu(赵 宇), CHEN Li(陈 莉), ZHOU Hong(周 宏)
Rare and Rare earth Metallic Materials
- 99
- Johnson−Cook dynamic constitutive relationship for TC16 titanium alloy
- YANG Yang(杨 扬), ZENG Yi(曾 毅), WANG Bing-feng(汪冰峰)
- 100
- Effects of thermohydrogen treatment on microstructures
of α+β and β titanium alloy as-cast - ZHAO Yong-qing(赵永庆), CAO Xing-min(曹兴民), XI Zheng-ping(奚正平)
- 101
- Preparation of Ti-Al alloy sheet by
electron beam physical vapor deposition - MA Li(马 李), HE Xiao-dong(赫晓东), SUN Yue(孙 跃)
- 102
- Influence of heat treatment on microstructure and damage tolerance property in Ti-6Al-2Zr-1Mo-1V
- FAN Rong-hui(范荣辉), ZHU Ming(朱 明), HUI Song-xiao(惠松骁),
LI De-fu(李德富), SHEN Jian(沈 健)
- 103
- Microstructure of a two-phase titanium alloy by
rapid solidification technique - LIU Xing-xing(刘星星), LONG Ling(龙 玲), YAN Biao(严 彪),
TANG Ren-jian(唐人剑), ZOU Hong-liu(邹洪流)
- 104
- Influence of deformation parameters on microstructure and mechanical properties of TA15 titanium alloy
- ZHU Jing-chuan(朱景川), WANG Yang(王 洋), LIU Yong(刘 勇),
LAI Zhong-hong(来忠红), ZHAN Jia-jun(占家军)
- 105
- Microstructure and wear resistance of Ti-3Zr-2Sn-3Mo-15Nb (TLM) alloy
- YU Zhen-tao(于振涛), ZHENG Yu-feng(郑玉峰), NIU Jin-long(牛金龙),
HUANGFU Qiang(皇甫强), ZHANG Ya-feng(张亚峰), YU Sen(余 森)
- 106
- Hot deformation behavior and constitutive equations of titanium alloy Ti26
- DU Yu(杜 宇), QI Yun-lian(戚运莲), ZHAO Yong-qiang(赵永庆), WANG Rui-ning(王蕊宁),
LIU Wei(刘 伟), XI Zheng-ping(奚正平), HONG Quan(洪 权)
- 107
- Effect of deformation processing parameter on microscopic structure of
Ti14 alloy under semi-solid - GUO Ping(郭 萍), ZHAO Yong-qing(赵永庆), WU Wei-lu(吴玮璐)
- 108
- Influence of interstitial content on mechanical properties of new type of
near α titanium alloy at cryogenic temperature - LIU Wei(刘 伟), DU Yu(杜 宇), YANG Guan-jun(杨冠军)
- 109
- Effect of TiO2 cathode performance on preparation of Ti by electro-deoxidation
- DU Ji-hong(杜继红)，XI Zheng-ping(奚正平)，LI Qing-yu(李晴宇),
XU Qian(许 茜)，TANG Yong(唐 勇)，LI Zheng-xian(李争显
- 110
- Tensile and creep properties of Ti-600 alloy
- ZENG Li-ying(曾立英), HONG Quan(洪 权), YANG Guan-jun(杨冠军),
ZHAO Yong-qing(赵永庆), QI Yun-lian(戚运莲), GUO Ping(郭
- 111
- Effect of heat treatment on thermal stability of Ti40 alloy
- XIN She-wei(辛社伟), ZHAO Yong-qing(赵永庆), ZENG Wei-dong(曾卫东)
- 112
- Effect of rolling and heat treatment on microstructure and
properties of Ti-26 sheet - ZHAO Bin(赵 彬), YANG Ying-li(杨英丽), GUO Di-zi(郭荻子),
SU Hang-biao(苏航标), YIN Jing-ou(殷京瓯)
- 113
- Hot deformation behavior and microstructure evolution of titanium alloy Ti-Al-Zr-Sn-Mo-Si-Y
- QI Yun-lian(戚运连), XI Zheng-ping(奚正平), ZHAO Yong-qing(赵永庆),
WANG Rui-ning(王蕊宁), DU Yu(杜 宇), LUO Yuan-yuan(罗媛媛)
- 114
- Hot deformation and processing maps of titanium matrix composite
- WANG Rui-ning(王蕊宁), XI Zheng-ping(奚正平), ZHAO Yong-qing(赵永庆),
QI Yun-lian(戚运莲)
- 115
- Effect of carbon content on microstructure and property of
TiC/Ti-6Al-4V composites - WANG Xiang(王 香), GAI Peng-tao(盖鹏涛)
- 116
- Microstructure of Ag-Sn-Cu-Bi-Ni alloy after oxidation
- WU Chun-ping(吴春萍), YI Dan-qing(易丹青), LI Jian(李 荐),
WANG Bin(王 斌)，XU Can-hui(许灿辉)，LU Xiao-dong(卢小东)
- 117
- Synthesis and characterization of tantalum nitride nanopowder prepared through homogeneous reaction
- MA Chun-hong(马春红), ZHANG Wei-feng(张威峰), HE Ji-lin(何季麟), ZHU Hong-min(朱鸿民)
- 118
- Preparation of zirconium by electro-deoxidization in molten salt
- LI Qing-yu(李晴宇), DU Ji-hong(杜继红), XI Zheng-ping(奚正平)
- 119
- Conductivity of cerium oxides doped by trivalent cations
- ZHANG Hong(张 鸿), WANG Jian (汪 健), WANG Shen-cun(王申存), LI Zhi-cheng(李志成)
- 120
- Tribological behavior of Ni-Cr-based composite at high temperatures
- XUE Mao-quan(薛茂权)
- 121
- Effect of dopant content on microstructure and properties of
Si-Al-K doped molybdenum - LI Da-cheng(李大成), ZHOU Zhang-jian(周张健), PU Chun-yang(卜春阳)
- 122
- Fabrication and characterization of high dense Mo/Cu composites for
electronic packaging applications - CHENGuo-qin(陈国钦), JIANG Long-tao(姜龙涛), WU Gao-hui(武高辉),
ZHU De-zhi(朱德志), XIU Zi-yang(修子扬)
- 123
- Kinetics of non-isothermal precipitation process of perovskite phase in oxidized Ti-bearing blast furnace slag
- WANG Ming-yu(王明玉), HE Yue-hui(贺跃辉), WANG Xue-wen(王学文),
LOU Tai-ping(娄太平), SUI Zhi-tong(隋智通)
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9