ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 8 No. 2 June 1998
- 1
- STRAIN INDUCED STRUCTURE TRANSITION IN HOT DEFORMED γ+α DUALPHASE TITANIUM ALUMINIDE
- Chen Guoliang and Wang Jinguo
- 2
- ELECTRODE CHARACTERISTICS OF NANOCRYSTALLINE LaNi5PREPARED BY MECHANICAL ALLOYING
- Chen Zhenhua Chen Zhaohui Zhou Duosan and Huang Peiyun Lü Manqi and Wang Yulan
- 3
- DEVELOPMENT OF MATERIAL USED FOR AVIATION APPARATUS AXLE JOURNALS
- Wu Enxi, Li Shen, Qian Chongliang and Zou Zhiqiang
- 4
- WAYS OF STABILIZING CONTINUOUS UNIDIRECTIONAL SOLIDIFICATION PROCESS
AND VERIFICATION TESTS - Chang Guowei, Zhang Hu, Wang Zidong, Wang Jingsong and Hu Hanqi
- 5
- GROWTH MORPHOLOGIES OF QUASICRYSTALLINE PHASE IN A BULK UNDERCOOLED Al-Mn-(Si,B) ALLOY
- Song Guangsheng, Yang Gencang and Zhou Yaohe
- 6
- MAGNETIC PHASE TRANSITIONS AND MAGNETIC PROPERTIES OF Nd3(Fe,Mo)29 COMPOUND AND ITS NITRIDE
- Pan Hongge Wang Xinhua ChenYun and Chen Changpin Yang Fuming
- 7
- A MOLD MATERIAL USED FOR TITANIUM-ALUMINUM ALLOY—CALCIA
- Guo Jingjie, Su Yanqing, Liu Yuan, Ding Hongsheng, Ren Zhijiang and Jia Jun
- 8
- AN ADVANCED TECHNOLOGY OF DRAWING IN GAS-STORAGE CYLINDER MAKING
- Guo Baofeng, Ren Yunlai, Li Weimin, Gao Shiyou, Gu Yuji and Su Shengui
- 9
- DEVELOPMENT OF MoS2- CONTAINING Ni-Cr BASED ALLOYS AND THEIR HIGH-TEMPERATURE TRIBOLOGICAL PROPERTIES
- Xiong Dangsheng Peng Chaoqun and Huang Qizhong
- 10
- STRUCTURAL TRANSFORMATION AND ITS REVERSIBILITY IN LIQUID Al-13%Si ALLOY AT HIGH TEMPERATURES
- Wang Weimin Bian Xiufang Qin Jingyu and Ye Yifu S. I. Sljusarenko
- 11
- DEFORMATION BEHAVIOR OF FeAl INTERMETALLIC ALLOY AT ELEVATED TEMPERATURES
- Li Dingqiang, Lin Dongliang and Liu Yi
- 12
- LOW CYCLE FATIGUE IN TITANIUM ALUMINIUM FORMED BY CENTRIFUGAL SPRAY DEPOSITION
- Chen Wenzhe Zhang Sa and Qian Kuangwu Gu Haicheng Wang Zhongguang
- 13
- NUMERICAL SIMULATION FOR WIDE MAGNITUDE AND HIGH SPEED ALUMINUM FOIL MILL
- Wang Hongxu and Lian Jiachuang Zhang Junliang and Chen Shuyun
- 14
- IMPROVEMENT IN ELECTROCHEMICAL PERFORMANCES OF Mm(NiCoMnAl)5ELECTRODES BY SURFACE MODIFICATION
- Chen Weixiang
- 15
- INFLUENCE OF Fe DOPING ON ELECTROCHEMICAL PROPERTIES OF Ml(Ni,Co,Mn,Ti)5 HYDROGEN STORAGE ALLOY
- Chen Lixin and Lei Yongquan
- 16
- MECHANICALLY ACTIVATED SYNTHESIS AND APPLICATION OF ULTRAFINE ZrSiO4 POWDER
- Cao Jian and Li Zhili
- 17
- MECHANICAL ANALYSIS AND NUMERICAL CALCULATION OF BONDING STRENGTH MEASUREMENT BY INTERFACIAL INDENTATION METHOD
- Yi Maozhong, Huang Baiyun, Dai Yao, He Jiawen and Zhou Huijiu
- 18
- SUPERPLASTIC DEFORMATION OF TiAl BASED ALLOY
- Zhou Kechao Huang Baiyun Qu Xuanhui and Cheng Xiaoqun Zhang Zhongyuan and Zhou Jianhua
- 19
- MICROSTRUCTURE AND MECHANICAL PROPERTIES OF (Nb, Ti)C-NICKEL BASE SUPERALLOY
- Cai Kefeng, Nan Cewen and Min Xinmin
- 20
- CONTINUOUS CASTING TECHNOLOGY OF SINGLE CRYSTAL COPPER ROD
- Xu Zhengming, Li Jianguo and Fu Hengzhi
- 21
- INFLUENCE OF CRYSTALLIZATION TEMPERATURE ON PHASE TRANSFORMATION IN Ti-RICH NiTi THIN FILMS
- Qi Xuan, Guo Liang, Jiang Bohong, Xu Dong, Qi Zhenzhong and Cai Bingchu
- 22
- EFFECT OF CURRENT DENSITY ON AMORPHOUS Al-Mn ELECTRODEPOSITON
- Li Jianchen, Lu Xiaoxia and Jiang Qing
- 23
- MICROSTRUCTURES AND MECHANICAL PROPERTIES OF SEMI-SOLID EXTRUDED IN-SITU Al-4.5Cu-0.8Mg/TiCpCOMPOSITES
- Zhang Erlin Yang Bo and Zeng Songyan Ma Mingzhen
- 24
- EFFECTS OF NITRIDING TEMPERATURE ON MAGNETIC PROPERTIES OF MELT-SPUN Pr1.4Fe10.5Mo1.5Nx AND ITS PHASE ANALYSIS
- Zhang Shengen Zhang Jiuxing Yang Hongchuanand Zhou Meiling
- 25
- PREPARATION OF SiC-AlN COMPOSITE POWDERS BY INORGANIC SOL-GEL PROCESSING
- Xiao Hanning, Yin Jixiang, Gao Jiming and Yang Qiaoqin
- 26
- PHOTOELECTROCHEMICAL STUDY OF PASSIVE LAYERS ON COPPER ELECTRODES IN SOME ALKALINE MEDIA
- A. Kamkin Zhou Guoding Xu Qunjie and B. H. Loo
- 27
- FORMABILITY OF INTERMEDIATE COMPOUNDS IN OXIDE SYSTEMS OF M2O3-M′2O3TYPE
- Wu Zhu Li Chonghe Deng Hongmei and Chen Nianyi Wu Ping
- 28
- MOLTEN SALT PHASE DIAGRAMS CALCULATION USING ARTIFICIAL NEURAL NETWORK OR PATTERN RECOGNITION-BOND PARAMETERS
Part2. Prediction of phase diagrams of ternary molten salt systems - Qiu Guanzhou Wang Xueye and Wang Dianzuo Chen Nianyi
- 29
- MAGNETIC SEPARATION OF FLUID CATALYTIC CRACKING EQUILIBRIUM CATALYST
- Chen Jin Xiang Fazhu and He Pingbo Guo Junxiang
- 30
- PREPARATION OF ZnO CERAMIC POWDER BY SOL-GEL METHOD AND ITS VOLTAGE SENSITIVE PROPERTIES
- Chen Jianxun, Zhao Ruirong and Jiang Hanying
- 31
- ROLE OF NaCl IN ORE-FORMING OF SAND-SHALE TYPE COPPER DEPOSITS
- Tan Kaixuan and Dai Tagen
- 32
- NEURAL NETWORK ASSESSMENT OF ROCKBURST RISKS FOR DEEP GOLD MINES IN SOUTH AFRICA
- Feng Xiating S. Webber M. U. Ozbay
- 33
- STRESS AND ENERGY TRANSFER OF WATER COUPLING BLASTING
- Zhang Qiang Li Xibing Zhu Fangcai and Chen Shouru
- 34
- PRELIMINARY STUDY ON GEOMETRIC MODELING OF GEOLOGIC BODY
- Mao Xiancheng and Dai Tagen
- 35
- OPTIMIZATION OF CUT-OFF GRADE IN OPEN-PIT BASED ON CONTROL THEORY
- Xie Yingliang
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9