ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 20 Sepecial 3 September 2010
Material Development and Alloy Design
- 1
- X38CrMoV5 hot-work tool steel as tool material for thixoforging of steel: Numerical and experimental evaluation
- A. RASSILI, J. C. PIERRET, G. VANEETVELD, J. HALLEUX, G. WALMAG, J. LECOMTE-BECKERS
- 2
- Application of semisolid process to Zr-based metallic glass matrix composites
- T. Tamura, A. Makaya, K. Miwa
- 3
- Commercial AM60 alloy for semisolid processing:
Effects of continuous rheoconversion process on microstructure - XING Bo (邢 博), LI Yuan-dong (李元东), MA Ying (马 颖),HAO Yuan (郝 远), D.APELIAN
- 4
- Fabrication of AZ31 alloy wire by continuous semisolid extrusion process
- GUAN Ren-guo(管仁国), ZHAO Zhan-yong(赵占勇), SUN Xiao-ping(孙小平),
HUANG Hong-qian(黄红乾), DAI Chun-guang(戴春光), ZHANG Qiu-sheng(张秋生)
Microstructure and Properties
- 5
- In situ microtomography investigation of microstructural evolution in Al-Cu alloys during holding in semi-solid state
- S. TERZI，L. SALVO, M. SUERY, A. DAHLE, E. BOLLER
- 6
- Microstructure evolution and thixoextrusion of
AZ91D magnesium alloy produced by SSTT - CHENG Yuan-sheng(程远胜), CHEN Qiang(陈 强), HUANG Zhe-qun(黄哲群), HUANG Shu-hai(黄树海)
- 7
- Microstructure of semi-solid ADC12 aluminum alloy adopting
new SIMA method - WANG Zhen-yu(王振宇), JI Ze-sheng(吉泽升), SUN Li-xin(孙丽鑫), XU Hong-yu(许红雨)
- 8
- Microstructure of AZ91D magnesium alloy semi-solid billets prepared by SIMA method from chips
- XU Hong-yu(许红雨), JI Ze-sheng(吉泽升), HU Mao-liang(胡茂良), WANG Zhen-yu(王振宇)
- 9
- Microstructure and mechanical properties of rheo-diecasted A390 alloy
- ZHAO Jun-wen(赵君文), WU Shu-sen (吴树森)
- 10
- Effect of semi-solid processing on microstructure and mechanical properties of 5052 aluminum alloy
- Lü Shu-lin(吕书林), WU Shu-sen (吴树森), ZHU Ze-ming(朱泽明), AN Ping(安 萍),
MAO You-wu(毛有武)
- 11
- Microstructure and properties of rheo-diecast Al-20Si-2Cu-1Ni-0.4Mg alloy with direct ultrasonic vibration process
- WU Shu-sen (吴树森), ZHONG Gu (钟 鼓), WAN Li (万里), AN Ping (安 萍), MAO You-wu(毛有武)
- 12
- Microstructural evolution of Mg9AlZnY alloy with vibration in
lost foam casting during semi-solid isothermal heat treatment - ZHAO Zhong(赵 忠), FAN Zi-tian(樊自田), JIANG Wen-ming(蒋文明), DONG Xuan-pu(董选普)
- 13
- Experimental studies and phase field modeling of microstructure evolution during solidification with electromagnetic stirring
- P. Gerald Tennyson, P. Kumar, H. Lakshmi, G. Phanikumar, P. Dutta
- 14
- Microstructural characteristics of thixoforged A356 alloy in mushy state
- S. TAHAMTAN, A. FADAVI BOOSTANI
- 15
- Synthesis and characterization of 356-SiCp composites by
stir casting and compocasting methods - S. AMIRKHANLOU, B. NIROUMAND
- 16
- Design of experiments for determination of influence of different
parameters on mechanical properties of semi-solid extruded parts - V. POUVAFAR, S. A. SADOUGH, F. HOSSEINJ, M. R. RAHMANI
- 17
- Mechanical properties of thixo-formed austempered ductile iron
- B. HEIDARIAN, M. NLILI-AHMADABADI, M. MORADI
- 18
- Characterization on morphology evolution of primary phase in semisolid A356 under slightly electromagnetic stirring
- LIU Zheng (刘 政), MAO Wei-min (毛卫民), LIU Xiao-mei (刘小梅)
- 19
- Thixotropic compression deformation behavior of SiCp/AZ61 magnesium matrix composites
- YAN Hong (闫 洪), WANG Jian-jin(王建金)
- 20
- Microstructure evolution behavior of AlSi9Cu3 alloy during rheocasting
- GUO Hong-min(郭洪民), LIU Xu-bo(刘旭波), YANG Xiang-jie(杨湘杰), ZHANG Ai-sheng(章爱生), LIU Yong(刘勇)
- 21
- In-situ observation of crystal detachment behavior in NH4Cl-H2O system from chilling metal surface with vibration
- ZHANG Ying(张 莹), WANG Meng(王 猛), DU Li-cheng(杜立成), LIN Xin(林 鑫), HUANG Wei-dong(黄卫东)
- 22
- Morphological evolution of non-dendritic microstructure during
solidification under stirring - LIN Xin(林 鑫), TONG Lei-lei(统雷雷), ZHAO Li-ning(赵力宁),
WANG Li-lin(王理林), WANG Meng(王 猛), HUANG Wei-dong(黄卫东)
- 23
- Semi-solid rheocasting of grain refined aluminum alloy 7075
- U. A. CURLE, G. GOVENDER
- 24
- Influence of surface liquid segregation on corrosion behavior of semi‑solid metal high pressure die cast aluminium alloys
- E. P. MASUKU , H. MÖLLER, U. A. CURLE, P. C. PISTORIUS, W. LI
- 25
- Influence of elevated Fe, Ni and Cr levels on tensile properties of
SSM-HPDC Al-Si-Mg alloy F357 - H. MöLLER, W. E. STUMPF, P. C. PISTORIUS
- 26
- Characterization of surface liquid segregation in SSM-HPDC aluminium alloys 7075, 2024, 6082 and A201
- H. MöLLER, U. A. CURLE , E. P. MASUKU
- 27
- Wear of semi-solid rheocast SiCp/Al metal matrix composites
- U. A. CURLE, L. IVANCHEV
- 28
- Effects of primary phase morphology on mechanical properties of Al-Si-Mg-Fe alloy in semi-solid slurry casting process
- R. BURAPA, S. JANUDOM, T. CHUCHEEP, R. CANYOOK, J. WANNASIN
- 29
- Microstructure and mechanical properties of rheo-diecasting AZ91D Mg alloy
- YANG Liu-qing(杨柳青), KANG Yong-lin(康永林), ZHANG Fan(张 帆), XU Jun(徐 骏)
Rheology, Modelling and Simulation
- 30
- Effect of high shear rate on solidification microstructure of
semisolid AZ91D alloy - ZHU Guang-lei (朱光磊), XU Jun (徐 骏), ZHANG Zhi-feng (张志峰), LIU Guo-jun(刘国钧)，Z. Fan
- 31
- Effects of annular electromagnetic stirring processing parameters on
semi-solid slurry production - CHEN Xing-run(陈兴润), ZHANG Zhi-feng(张志峰), XU Jun(徐 骏)
- 32
- Prediction of shear-related defect locations in semi-solid casting using numerical flow models
- F. PINEAU, G. D’AMOURS
- 33
- Rheological behavior of semi-solid Mg2Si/AM60
magnesium matrix composites at steady state - HU Yong(胡 勇), HE Bo-lin(何柏林), YAN Hong(闫洪)
- 34
- Numerical simulation and experiment validation of thixoforming angle frame of AZ61 magnesium alloy
- JIANG Ju-fu (姜巨福), WANG Ying (王 迎), QU Jian-jun (曲建俊),
DU Zhi-ming (杜之明), LUO Shou-jing (罗守靖)
- 35
- Investigation of semi-solid aluminum alloy filling-plastic
flowing in thixoforging - DU Zhi-ming (杜之明), LIU Jun (柳 君), CHEN Gang(陈 刚), QIN Jin (秦晋), XIE Shui-sheng (谢水生)
- 36
- Numerical simulation of solidification of liquid aluminum alloy flowing on cooling slope
- N. K. KUND, P. DUTTA
- 37
- Rheological behavior, microstructure and hardness of A356 aluminum alloy in semisolid state using backward extrusion process
- S. A. SADOUGH, M. R. RAHMANI, V. POUYAFAR
- 38
- Treatment of discontinuous interface in liquid-solid forming with extended finite element method
- ZHOU Ji-ming(周计明), QI Le-hua(齐乐华)
- 39
- Characterization of thixoforming process of 100Cr6 steel
- K. P. SO&#;EK , A. RASSILI , J. C. PIERRET , G. VANEETVELD
- 40
- Numerical simulation on thixo-co-extrusion of double-layer tube with A356/AZ91D
- WANG Kai-kun(王开坤), SUN Jian-lin (孙建林), MENG Hai-feng (孟海峰),
DU Yan-mei (杜艳梅), WANG Xi (王晰)
- 41
- Numerical simulation of a thixocasting process for AISI420 stainless steel air-turbine blade
- DAO Van-luu(陶文琉), ZHAO Sheng-dun(赵升吨), ZHANG Qi(张 琦)
- 42
- Simulation of semisolid diecasting process of
four-way valve of HPb59-1 alloy for air-conditioner - YAN Guan-hai(闫观海), ZHAO Sheng-dun(赵升吨), SHA Zheng-hui(沙郑辉)
Process Development
- 43
- Stability of steel thixoforming process
- J. C. PIERRET, A. RASSILI, G. VANEETVELD, J. LE, COMTE-BECKERS
- 44
- Electro-pulse modification and reheating process for production of thixotropic microstructure in AlSi7Mg alloy
- TIAN Wen-tong(田文彤), ZHANG Guang-an(张广安)
- 45
- Suitability of lost cores in rheocasting process
- H. Michels, M. Bünck, A. Bührig-Polaczek
- 46
- Metal flow and die wear in semi-solid forging of steel using coated dies
- L. KHIZHNYAKOVA, M. EWERING, G. HIRT, K. BOBZIN, N. BAGCIVAN
- 47
- Induction reheating of A356.2 aluminum alloy and thixocasting as automobile component
- H. LAKSHMI, M. C. VINAY KUMAR, RAGHUNATH, P. KUMAR, V. RAMANARAYANAN,
K. S. S. MURTHY, P. DUTTA
- 48
- Effects of casting factors of cooling slope on semisolid condition
- T. HAGA, R. NAKAMURA, R. TAGO, H. WATARI
- 49
- Reverse design of microstructure and application effectiveness for semi-solid processing of aluminum alloy
- YANG Yi-tao(杨弋涛), YIN Xiang-lin(尹湘林), SUN Bao-liang(孙保良), ZHANG Heng-hua(张恒华),
JIN Xiao-chun(金晓春), SHAO Guang-jie(邵
- 50
- Semi-solid gravity sand casting using gas induced semi-solid process
- T. CHUCHEEP, R. BURAPA, S. JANUDOM, S. WISUTMETHANGOON, J. WANNASIN
- 51
- Preparation of SiCp/A356 electronic packaging materials and its thixo-forging
- WANG Kai-kun(王开坤), KANG Yong-lin(康永林), SONG Pu-guang(宋普光),
XU Feng(徐 峰), LI Xian-hui(黎先辉)
Industrial Applications & Others
- 52
- Modified rheological processing technology and its applications in iron and steels
- XING Shu-ming(邢书明), BAO Pei-wei(鲍培玮), LI Nan(李 楠), YAO Shu-qing(姚淑卿)
- 53
- Thixocasting combination spanners using stainless steel X39CrMo17
- M. BÜNCK, E. SUBASIC, A. BÜHRIG-POLACZEK, K. JIANG, S. MÜNSTERMANN, J. M. SCHNEIDER, K. FICKERT, H. J
- 54
- Thixoextrusion of A357 aluminium alloy
- A. FORN, G. VANEETVELD, J. C. PIERRET, S. MENARGUES,
M. T. BAILE, M. CAMPILLO, A. RASSILI
- 55
- Research and development of gas induced semi-solid process for industrial applications
- J. WANNASIN, S. JANUDOM, T. RATTANOCHAIKUL, R. CANYOOK,
R. BURAPA, T. CHUCHEEP, S. THANABUMRUNGKUL
- 56
- Industrial development of gas induced semi-solid process
- S. THANABUMRUNGKUL, S. JANUDOM, R. BURAPA, P. DULYAPRAPHANT, J. WANNASIN
- 57
- AlTiN and AlTiON-coated hot work tool steels for tooling in steel thixoforming
- Y. BIROL, D. ISLER
- 58
- SiC nanoparticles reinforced magnesium matrix composites fabricated by
ultrasonic method - WANG Zhao-hui(王朝辉), WANG Xu-dong(王旭东), ZHAO Yu-xin(赵宇昕), DU Wen-bo(杜文博)
- 59
- Characteristics of 100Cr6 bearing steel after thixoforming process performed with prototype device
- &#;. ROGAL, J. DUTKIEWICZ, T. CZEPPE , J. BONARSKI, B. OLSZOWSKA-SOBIERAJ
- 60
- Structure of miniature components from steel produced by
forming in semi-solid state - b. Masek, D. Aisman, M. Behulova, H. Jirkova
- 61
- Semi-solid moulding: Competition to cast and machine from forging in making automotive complex components
- Q. ZHU, S. P. MIDSON
- 62
- A review on steel thixoforming
- A. RASSILI, H. V. ATKINSON
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9