ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 21 No. 1 January 2011
Structural Materials
- 1
- Mechanical properties and stress corrosion cracking behaviour of
AZ31 magnesium alloy laser weldments - P. B. SRINIVASAN, S. RIEKEHR, C. BLAWERT, W. DIETZEL, M. KOÇAK
- 2
- Microstructure of spray formed Al-Zn-Mg-Cu alloy with Mn addition
- CAI Yuan-hua, LIANG Rui-guang, SU Zhan-pei, ZHANG Ji-shan
- 3
- Microstructure evolution and mechanical properties of Mg-x%Zn-1%Mn
(x=4, 5, 6, 7, 8, 9) wrought magnesium alloys - ZHANG Ding-fei, SHI Guo-liang, ZHAO Xia-bing, QI Fu-gang
- 4
- Effects of heat treatment on microstructure of
directionally solidified Ti-45Al-8Nb-(W, B, Y) alloy - DING Xian-fei, LIN Jun-pin, ZHANG Lai-qi, CHEN Guo-liang
- 5
- Effect of impinging angle and rotating speed on erosion behavior of aluminum
- A. K. JHA, R. BATHAM, M. AHMED, A. K. MAJUMDER, O. P. MODI, S. CHATURVEDI, A. K. GUPTA
- 6
- Quasi-static and dynamic tensile behaviors in electron beam
welded Ti-6Al-4V alloy - ZHANG Jing, TAN Cheng-wen, REN Yu, WANG Fu-chi, CAI Hong-nian
- 7
- Dynamic behavior and fracture mode of TiAl intermetallics with
different microstructures at elevated temperatures - ZAN Xiang, HE Yue-hui, WANG Yang, XIA Yuan-ming
- 8
- Effect of silicon on phase selection of ternary compounds during
solidification of ZA84 magnesium alloy - ZHANG Chun-xiang, GUAN Shao-kang, LIU Tao, LI Shao-hua, LIU Zhong-xia
- 9
- Microstructures and interfacial quality of diffusion bonded
TC21 titanium alloy joints - LIU Hui-jie, FENG Xiu-li
- 10
- Effect of melt convection on primary dendrite arm spacing in
directionally solidified Pb-26%Bi hypo-peritectic alloys - HU Xiao-wu, LI Shuang-ming, GAO Si-feng, LIU Lin, FU Heng-zhi
- 11
- Effect of cryogenic cooling in milling process of AISI 304 stainless steel
- Muammer NALBANT, Yakup YILDIZ
Functional Materials
- 12
- Correlation between pre-peak in structure factor and physical properties in
Al-based amorphous alloys - LI Rui, WANG Wei-min, MA Hai-jian, LI Gui-hua, QIN Jing-yu, ZHANG Zhong-hua, TANG Xing-wei
- 13
- Influence of solidification mode on pore structure of
directionally solidified porous Cu-Mn alloy - JIANG Guang-rui, LI Yan-xiang, LIU Yuan
- 14
- Ni56Mn25−xCrxGa19 (x=0, 2, 4, 6) high temperature shape memory alloys
- MA Yun-qing, LAI San-li, YANG Shui-yuan, LUO Yu, WANG Cui-ping, LIU Xing-jun
- 15
- Effect of additive BaO on corrosion resistance of xCu/(10NiO-NiFe2O4)
cermet inert anodes for aluminum electrolysis - HE Han-bing, XIAO Han-ning, ZHOU Ke-chao
- 16
- Microstructure and magnetic properties of Ni-Zn ferrites doped with MnO2
- SU Hua, ZHANG Huai-wu, TANG Xiao-li, JING Yu-lan
- 17
- Effects of synthesis conditions on layered Li[Ni1/3Co1/3Mn1/3]O2 positive-electrode via hydroxide co-precipitation method for
lithium-ion batteries - HU Chuan-yue, GUO Jun, DU Yong, XU Hong-hui, HE Yue-hui
- 18
- Microstructural evolution of melt-spun Mg-10Ni-2Mm hydrogen storage alloy
- WU Ying, XING Na, LU Zhi-chao, HAN Wei, ZHOU Shao-xiong, J. K. SOLBERG, V. A. YARTYS
- 19
- Preparation of high active Pt/C cathode electrocatalyst for
direct methanol fuel cell by citrate-stabilized method - JIANG Qing-lai, PENG Zhong-dong, XIE Xiao-feng,
DU Ke, HU Guo-rong, LIU Ye-xiang
- 20
- Effect of citric acid on microstructure and electrochemical characteristics of high voltage anodized alumina film formed on etched Al Foils
- BAN Chao-lei, HE Ye-dong, SHAO Xin
Computational Materials Science and Numerical Mode
- 21
- Thermodynamic optimization of Bi-Ni binary system
- WANG Jiang, MENG Fan-gui, LIU Li-bin, JIN Zhan-peng
- 22
- Thermodynamic analysis of growth of ternary III-V semiconductor
materials by molecular-beam epitaxy - YE Zhi-cheng, SHU Yong-chun, CAO Xue, GONG Liang, PI Biao,
YAO Jiang-hong, XING Xiao-dong, XU Jing-jun
- 23
- Texture evolution and its simulation of cold drawing copper
wires produced by continuous casting - CHEN Jian, YAN Wen, LI Wei, MIAO Jian, FAN Xin-hui
- 24
- Constructing processing map of Ti40 alloy using artificial neural network
- SUN Yu, ZENG Wei-dong, ZHAO Yong-qing,
ZHANG Xue-min, MA Xiong, HAN Yuan-fei
Mine Engineering, Metallurgical Engineering, Chemi
- 25
- Electrochemical investigation on kinetics of potassium intercalating
into graphite in KF melt - LIU Dong-ren, LI Wang-xing, YANG Zhan-hong, QIU Shi-lin, LUO Ying-tao
- 26
- Kinetics of AlOOH dissolving in caustic solution studied by high-pressure DSC
- BAO Li, ZHANG Ting-an, DOU Zhi-he, LÜ Guo-zhi,
GUO Yong-nan, NI Pei-yuan, WU Xu-jian, MA Jia
- 27
- Electrochemical behaviors of tantalum in
anhydrous ethanol containing hydrogen sulfate ions - YANG Hai-ping, YANG Sheng-hai, CAI Ya-nan, HOU Guo-feng, XIA Jiao-yun, TANG Mo-tang
- 28
- Preparation of TiC powders by carbothermal reduction method in vacuum
- SEN Wei, XU Bao-qiang, YANG Bin, SUN Hong-yan,
SONG Jian-xun, WAN He-li, DAI Yong-nian,
- 29
- Leaching behavior of metals from limonitic laterite ore by
high pressure acid leaching - GUO Xue-yi, SHI Wen-tang, LI Dong, TIAN Qing-hua
- 30
- Solidification of horizontally continuous casting of super-thin slab in
stable magnetic field and alternating current - ZHANG Xiao-wei, HUANG Jin-feng, DENG Kang, REN Zhong-ming
- 31
- Microwave drying characteristics and kinetics of ilmenite
- LI Yu, LEI Ying, ZHANG Li-bo, PENG Jin-hui, LI Chang-long
- 32
- Effect of sodium hexametaphosphate on separation of serpentine from pyrite
- LU Yi-ping, ZHANG Ming-qiang, FENG Qi-ming, LONG Tao, OU Le-ming, ZHANG Guo-fan
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9