ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 21 Sepecial 1 March 2011
- 1
- Microstructure and properties of alumina-silicon carbide nanocomposites fabricated by pressureless sintering and post hot-isostatic pressing
- Young-Keun JEONG, Koichi NIIHARA
- 2
- Formation of interfacial brittle phases sigma phase and IMC in
hybrid titanium-to-stainless steel joint - Min Ku LEE, Jung Gu LEE, Jong Keuk LEE, Sung Mo HONG, Sang Hoon LEE,
Jin Ju PARK, Jae Woo KIM, Chang Kyu RHEE
- 3
- Lubrication properties of silver-palladium alloy prepared by
ion plating method for high temperature stud bolt - Jung-Dae KWON, Sunghun LEE, Koo-Hyun LEE, Jong-Joo RHA, Kee-Seok NAN, Se-Hun KWON
- 4
- Improvement of hydrogen embrittlement and stress corrosion cracking by
annealing for Al-4.4Mg-0.6Mn alloy - Seong-Jong KIM, Min-Su HAN, Seong-Kweon KIM, Seok-Ki JANG
- 5
- Effect of CaO composition on oxidation and burning behaviors of
AM50 Mg alloy - Jin-Kyu LEE, Shae K. KIM
- 6
- Characteristic evaluation of Al2O3/CNTs hybrid materials for
micro-electrical discharge machining - Hyun-Seok TAK, Chang-Seung HA, Ho-Jun LEE,
Hyung-Woo LEE, Young-Keun JEONG, Myung-Chang KANG
- 7
- Dispersion of ultrafine SiC particles in molten Al-12Si alloy
- Jin-Ju PARK, Sang-Hoon LEE, Min-Ku LEE, Chang-Kyu RHEE
- 8
- Improvement of machining quality of copper-plated roll mold by
controlling temperature variation - Tae-Jin JE, Eun-Chae JEON, Sang-Cheon PARK, Doo-Sun CHOI,
Kyung-Hyun WHANG, Myung-Chang KANG
- 9
- Structural considerations in friction welding of hybrid Al2O3-reinforced aluminum composites
- In-Duck PARK, Choon-Tae LEE, Hyun-Soo KIM, Woo-Jin CHOI, Myung-Chang KANG
- 10
- CO2 laser-micro plasma arc hybrid welding for galvanized steel sheets
- C. H. KIM, Y. N. AHN, J. H. KIM
- 11
- Fabrication of cast carbon steel with ultrafine TiC particles
- Sang-Hoon LEE, Jin-Ju PARK, Sung-Mo HONG, Byoung-Sun HAN, Min-Ku LEE, Chang-Kyu RHEE
- 12
- Effect of aging treatment on irradiation-induced segregation of
high Mn-Cr steel - D. S. BAE, S. P. LEE, Y. R. CHO, H. TAKAHASHI
- 13
- Effects of Cr interlayer on mechanical and
tribological properties of Cr-Al-Si-N nanocomposite coating - Young Su HONG, Se Hun KWON, Tiegang WANG, Doo-In KIM, Jihwan CHOI, Kwang Ho KIM
- 14
- Electrodeposition behavior and characteristics of
Ni-carbon nanotube composite coatings - Sung-Kyu KIM, Tae-Sung OH
- 15
- Formation of nanocrystalline microstructure in arc ion plated CrN films
- Qi-min WANG, Se-Hun KWON, Kwang-Ho KIM
- 16
- Effect of carbon on microstructure of CrAlCxN1−x coatings by
hybrid coating system - Sung-Kyu AHN, Se-Hun KWON, Kwang-Ho KIM
- 17
- Effects of honing treatment on AIP-TiN and TiAlN coated end-mill for
high speed machining - Jae-Young HEO, Sung-Hak CHO, Tae-Jin JE, Kwang-Ho KIM, Hyung-Woo LEE, Myung-Chang KANG
- 18
- Hybrid functional IrO2-TiO2 thin film resistor prepared by
atomic layer deposition for thermal inkjet printheads - Won-Sub KWACK, Hyoung-Seok MOON, Seong-Jun JEONG, Qi-min WANG, Se-Hun KWON
- 19
- Thin film processing and multiferroic properties of
Fe-BaTiO3 hybrid composite - Pan YANG, Jin-song ZHU, Jai-Yeoul LEE, Hee Young LEE
- 20
- Properties of multilayer gallium and aluminum doped ZnO(GZO/AZO) transparent thin films deposited by pulsed laser deposition process
- Jin-Hyun SHIN, Dong-Kyun SHIN, Hee-Young LEE, Jai-Yeoul LEE
- 21
- Fabrication of curved micro structures on photoresist layer
- Jae Sung YOON, Tae-Jin JE, Doo-Sun CHOI, Sung Hwan CHANG, Kyung-Hyun WHANG
- 22
- Effect of coating material and lubricant on forming force and
surface defects in wire drawing process - S. M. BYON, S. J. LEE, D. W. LEE, Y. H. LEE, Y. LEE
- 23
- Experimental and finite element analysis for fracture of coating layer of galvannealed steel sheet
- S. I. KIM, J. U. HER, Y. C. JANG, Y. LEE
- 24
- Distribution of electric field for carbon nanotube assembly: Simulation (I)
- Soon-Geun KWON, Soo-Hyun KIM, Kwang-Ho KIM, Myung-Chang KANG, Hyung-Woo LEE
- 25
- Distribution of electric field for carbon nanotube assembly: Experiments (II)
- Soongeun KWON, Soo-Hyun KIM, Kwang-ho KIM, Myung-chang KANG, Hyung-woo LEE
- 26
- Dielectrophoretic assembly of semiconducting single-walled carbon
nanotube transistor - Se-Hun KWON, Young-Keun JEONG, Soongeun KWON, Myung-Chang KANG, Hyung-Woo LEE
- 27
- Effect of ammonia gas etching on growth of
vertically aligned carbon nanotubes/nanofibers - Sang-Gook KIM, Sooh-Yung KIM, Hyung-Woo LEE
- 28
- Collapse behavior evaluation of hybrid thin-walled member by
stacking condition - Kil-Sung LEE, Hyeon-Kyeong SEO, Yong-June YANG,
Woo-Chae HWANG, Kwang-Hee IM, In-Young YANG
- 29
- Effect of nanoclay on properties of porous PVdF membranes
- Hae-Young HWANG, Deuk-Ju KIM, Hyung-Jun KIM, Young-Taik HONG, Sang-Yong NAM
- 30
- Injection molding of micro patterned PMMA plate
- Yeong-Eun YOO, Tae-Hoon KIM, Tae-Jin JE, Doo-Sun CHOI, Chang-Wan KIM, Sun-Kyung KIM
- 31
- Synthesis of crosslinked polystyrene particles by
seeded batch polymerization with monomer absorption - Ki-Chang LEE, Han-Ah WI
- 32
- Comparative analysis on homogeneity of Pb and Cd in
epoxy molding compounds - Kyun-Gmee LEE, Yong-Keun SON, Jin-Sook LEE, Tai-Min NOH, Hee-Soo LEE
- 33
- Optical diffraction gratings embedded in BK-7 glass by
low-density plasma formation using femtosecond laser - Jung-Kyu PARK, Sung-Hak CHO, Kwang-Ho KIM, Myung-Chang KANG
- 34
- Creep and tensile properties of press molding joined GMT-sheets
- Jin-Woo KIM, Dong-Gi LEE
- 35
- Reliability of flip-chip bonded RFID die using
anisotropic conductive paste hybrid material - Jun-Sik LEE, Jun-Ki KIM, Mok-Soon KIM, Namhyun KANG, Jong-Hyun LEE
- 36
- 27Al MAS-NMR study of inorganic polymer formation at
ambient temperature - Sang-Wook AHN, Hee-Soo LEE, Wan-Hee YANG,Jung-Woo LEE, Young-Keun JEONG
- 37
- Simulation and prediction in laser bending of silicon sheet
- WANG Xu-yue, XU Wei-xing, XU Wen-ji, HU Ya-feng, LIANG Yan-de, WANG Lian-ji
- 38
- Experimental investigation of friction coefficient in tube hydroforming
- Hyae Kyung YI, Hong Sup YIM, Gun Yeop LEE, Sung Mun LEE, Gi Suk CHUNG, Young-Hoon MOON
- 39
- Optimal design considering structural efficiency of
compressed natural gas fuel storage vessels for automobiles - Myung-Chang KANG, Hyung Woo LEE, Chul KIM
- 40
- Portable nano probe for micro/nano mechanical scratching and measuring
- Woo-Park JEONG, Chang-Choi SOO, Cho HYUN, Woo-Lee DEUG
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9