ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 21 No. 5 May 2011
Structural Materials
- 1
- Microstructural evolution of 2026 aluminum alloy during hot compression and subsequent heat treatment
- ZHANG Hui, CHEN Rong, HUANG Xu-dong, CHEN Jiang-hua
- 2
- Effect of welding processes on AA2219 aluminium alloy joint properties
- S. MALARVIZHI, V. BALASUBRAMANIAN
- 3
- Effect of axial force on microstructure and tensile properties of
friction stir welded AZ61A magnesium alloy - A. RAZAL ROSE, K. MANISEKAR,V. BALASUBRAMANIAN
- 4
- Influence of serpentine channel pouring process parameters on
semi-solid A356 aluminum alloy slurry - CHEN Zheng-zhou, MAO Wei-min, WU Zong-chuang
- 5
- Production of Mg-Al-Zn magnesium alloy sheets with
ultrafine-grain microstructure by accumulative roll-bonding - ZHAN Mei-yan, ZHANG Wei-wen, ZHANG Da-tong
- 6
- High cycle fatigue behavior of the second generation single
crystal superalloy DD6 - SHI Zhen-xue, LI Jia-rong, LIU Shi-zhong, HAN Mei
- 7
- Influence of Cr addition on microstructure of a 5% Re-containing single crystal nickel-based superalloy
- TAN Xi-peng, LIU Jin-lai, JIN Tao, SUN Xiao-feng, HU Zhuang-qi
- 8
- Quantitative analysis of homogenization treatment of INCONEL718 superalloy
- MIAO Zhu-jun, SHAN Ai-dang, WU Yuan-biao,
LU Jun, XU Wen-liang, SONG Hong-wei
- 9
- Microstructure evolution and grain growth behavior of Ti14 alloy during semi-solid isothermal process
- CHEN Yong-nan, WEI Jian-feng, ZHAO Yong-qing, ZHENG Jing
- 10
- Interfacial microstructure and chemical stability during diffusion bonding of single crystal Al2O3-fibres with Ni25.8Al9.6Ta8.3Cr matrix
- WAN Xiao-jun, LIN Jian-guo
- 11
- Grain refinement process of pure iron target under hypervelocity impact
- NI Chuan-hao, XU Qiang, WANG Fu-chi
- 12
- Contact reactive brazing of Al alloy/Cu/stainless steel joints and
dissolution behaviors of interlayer - WU Ming-fang, SI Nai-chao, CHEN Jian
Functional Materials
- 13
- Formation mechanism of MgB2 in 2LiBH4 + MgH2 system for
reversible hydrogen storage - KOU Hua-qin, XIAO Xue-zhang, CHEN Li-xin, LI Shou-quan, WANG Qi-dong
- 14
- Influence of freezing rate on microstructure and electrochemical properties of
Mg-2%Ga alloys - FENG Yan, WANG Ri-chu, PENG Chao-qun
- 15
- Oxidation behaviors of electrodeposited nickel-cobalt coatings in air at 960 °C
- ZHOU Ke-chao, MA Li, LI Zhi-you
- 16
- Impedance spectroscopy study of high-temperature oxidation of
Gd2O3-Yb2O3 codoped zirconia thermal barrier coatings - ZHANG Dan-hua, GUO Hong-bo, GONG Sheng-kai
- 17
- Microstructure and mechanical properties of TiN/TiAlN multilayer coatings deposited by arc ion plating with separate targets
- WEI Yong-qiang, LI Chun-wei, GONG Chun-zhi, TIAN Xiu-bo, YANG Shi-qin
- 18
- Effects of addition of NH4HCO3 on pore characteristics and
compressive properties of porous Ti-10%Mg composites - WANG Yue-qin, TAO Jie, ZHANG Jin-long, WANG Tao
- 19
- Sintering of WC-10%Co nano powders containing TaC and
VC grain growth inhibitors - M. MAHMOODAN, H. ALIAKBARZADEH, R. GHOLAMIPOUR
- 20
- Binding tendency with oligonucleotides and cell toxicity of
cetyltrimethyl ammonium bromide-coated single-walled carbon nanotubes - YAN Xue-bin, GU Yong-hong, HUANG Dong, GAN Li, WU Li-xiang,
HUANG Li-hua, CHEN Zhe-dong, HUANG Su-ping
Computational Materials Science and Numerical Mode
- 21
- Characteristic atom occupation patterns of Au3Cu, AuCu3, AuCuI and AuCuII based on experimental data of disordered alloys
- XIE You-qing, LI Yan-fen, LIU Xin-bi, LI Xiao-bo, PENG Hong-jian, NIE Yao-zhuang
- 22
- Ageing process of pre-precipitation phase in Ni0.75Al0.05Fe0.2 alloy
based on phase field method - DONG Wei-ping, WANG Yong-xin, CHEN Zheng, YANG Kun
- 23
- Prediction of edge cracks and plastic-damage analysis of
Mg alloy sheet in rolling - ZHANG Ding-fei, DAI Qing-wei, FANG Lin, XU Xing-xing
- 24
- Plastic forming simulations of cold isostatic pressing of
selective laser sintered components - DU Yan-ying, SHI Yu-sheng, WEI Qing-song
- 25
- Effects of annulus gap on flow and temperature field in
electromagnetic direct chill casting process - TANG Meng-ou, XU Jun, ZHANG Zhi-feng, BAI Yue-long
Mine Engineering, Metallurgical Engineering, Chemi
- 26
- Calculation of hydrogen solubility in molten alloys
- JIANG Guang-rui, LI Yan-xiang, LIU Yuan
- 27
- Solubility and phase diagrams of hydroxyl manganese chloride
- WANG Yun-shan, ZHANG Jin-ping, YANG Gang
- 28
- Thermodynamic analysis on synthesis of fibrous Ni-Co alloys precursor and Ni/Co ratio control
- ZHAN Jing, HE Yue-hui, ZHOU Di-fei, ZHANG Chuan-fu
- 29
- Effect of surface dissolution on flotation separation of
fine ilmenite from titanaugite - ZHU Yang-ge, ZHANG Guo-fan, FENG Qi-ming, YAN Dai-cui, WANG Wei-qing
- 30
- Collecting performances of N-dodecylethylene-diamine and
its adsorption mechanism on mineral surface - LIU Wen-gang, WEI De-zhou, CUI Bao-yu
- 31
- Pyrite depression in marmatite flotation by sodium glycerine-xanthate
- HE Ming-fei, QIN Wen-qing, LI Wei-zhong, ZENG Ke
- 32
- Effect of metallic ions on dispersibility of fine diaspore
- ZHOU Yu-lin, HU Yue-hua, WANG Yu-hua
- 33
- New resistivity/dopant density model for compensated-Si
- Dominic LEBLANC, Karol PUTYERA
- 34
- Removal of boron from metallurgical grade silicon by
electromagnetic induction slag melting - LUO Da-wei, LIU Ning, LU Yi-ping, ZHANG Guo-liang, LI Ting-ju
- 35
- Low-temperature purification process of metallurgical silicon
- ZHAO Li-xin, WANG Zhi, GUO Zhan-cheng, LI Cheng-yi
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9