ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 21 No. 8 August 2011
Structural Materials
- 1
- Comparison of FSW and TIG welded joints in Al-Mg-Mn-Sc-Zr alloy plates
- HE Zhen-bo, PENG Yong-yi, YIN Zhi-min, LEI Xue-feng
- 2
- Direct-chill semi-continuous casting process of
three-layer composite ingot of 4045/3004/4045 aluminum alloys - JIANG Hui-xue, ZHANG Hai-tao, QIN Ke, CUI Jian-zhong
- 3
- Influence of Cu addition on microstructure and hardness of
near-eutectic Al-Si-xCu-alloys - Muzaffer ZEREN, Erdem KARAKULAK, Serap GÜMÜ&#;
- 4
- Effects of flow velocity on electrochemical behavior of
seachest 5083-H116 Al alloy for ship - Seung-Jun LEE, Seong-Jong KIM
- 5
- Effect of high temperature treatments on microstructure of
Nb-Ti-Cr-Si based ultrahigh temperature alloy - GUO Bao-hui, GUO Xi-ping
- 6
- Temperature dependence of anisotropic stress−rupture properties of
nickel-based single crystal superalloy SRR99 - HAN Guo-ming, YANG Yan-hong, YU Jin-jiang, SUN Xiao-feng
- 7
- Multilayered Ti-Al intermetallic sheets fabricated by
cold rolling and annealing of titanium and aluminum foils - SUN Yan-bo, ZHAO Ye-qing, ZHANG Di, LIU Cui-yun, DIAO Hao-yan, MA Chao-li
- 8
- Effect of hot working and post-deformation heat treatment on
microstructure and tensile properties of Ti-6Al-4V alloy - S. M. ABBASI, A. MOMENI
- 9
- Mechanical characterization of cp-Ti produced by investment casting
- Khaled M. IBRAHIM, Mansour MHAEDE, Lothar WAGNER
Functional Materials
- 10
- Effects of graphite content on microstructure and tribological properties of graphite/TiC/Ni-base alloy composite coatings
- CAI Bin, TAN Ye-fa, TU Yi-qiang, WANG Xiao-long, XU Ting
- 11
- Open-celled porous NiAl intermetallics prepared by
replication of carbamide space-holders - WU Jie, CUI Hong-zhi, CAO Li-li, GU Zheng-zheng
- 12
- Low temperature solid-phase sintering of
sintered metal fibrous media with high specific surface area - TANG Biao, TANG Yong, ZHOU Rui, LU Long-sheng, LIU Bin, QU Xiu-ming
- 13
- Electrochemical performance of LiFePO4-Li3V2(PO4)3 composite material prepared by solid-hydrothermal method
- GUO Xiao-dong, ZHONG Ben-he, LIU Heng, SONG Yang, WEN Jia-jie, TANG Yan
- 14
- Hydrothermal synthesis of monodisperse ZnxCd1−xS spheres and
their photocatalytic properties - JIA Zhi-fang, WANG Fu-min, XIN Feng
- 15
- Synthesis and characterization of arginine-modified and
europium-doped hydroxyapatite nanoparticle and its cell viability - ZHAO Yan-zhong, ZHU Jun, ZHU Shai-hong, HUANG Yan-yan, LI Zhi-you, ZHOU Ke-chao
- 16
- Deformation and recrystallization texture, microstructure and
kinetics of Pb-Ca-Sn alloy - F. ABOUHILOU, H. AZZEDDINE, B. MEHDI, B. ALILI, D. BRADAI
- 17
- Microwave direct synthesis and thermoelectric properties of
Mg2Si by solid-state reaction - ZHOU Shu-cai, BAI Chen-guang
- 18
- Preparation and characterization of LaB6 ultra fine powder by
combustion synthesis - DOU Zhi-he, ZHANG Ting-an, ZHANG Zhi-qi, ZHANG Han-bo, HE Ji-cheng
- 19
- Bending properties and fracture mechanism of
C/C composites with high density preform - ZHANG Ming-yu, SU Zhe-an, LI Jian-li, HUANG Qi-zhong
Computational Materials Science and Numerical Mode
- 20
- Relationship between partial and average atomic volumes of
components in Au-Ni alloys - XIE You-qing
- 21
- Calculation of phase diagram of Ti-Ni-O system and
application to deoxidation of TiNi alloy - QIU Ai-tao, LIU Lan-jie, PANG Wei, LU Xiong-gang, LI Chong-he
- 22
- Simulation of texture evolution during plastic deformation of FCC, BCC and HCP structured crystals with crystal plasticity based finite element method
- HUANG Shi-yao, ZHANG Shao-rui, LI Da-yong, PENG Ying-hong
- 23
- New algorithm for solving 3D incompressible viscous equations based on projection method
- NIU Xiao-feng, LIANG Wei, ZHAO Yu-hong, HOU Hua, MU Yan-qing, HUANG Zhi-wei, YANG Wei-ming
- 24
- Mathematical model for precursor gas residence time in
isothermal CVD process of C/C composites - YU Shu, ZHENG Zhou-shun, ZHANG Fu-qing, CAI Yong-qiang
Mine Engineering, Metallurgical Engineering, Chemi
- 25
- Recovery of copper from simulated ammoniacal spent etchant using
sterically hindered beta-diketone - LIANG Qi-wen, HU Hui-ping, FU Weng, YE Ting, CHEN Qi-yuan
- 26
- Existing state of potassium chloride in agglomerated sintering dust and
its water leaching kinetics - PENG Cui, GUO Zhan-cheng, ZHANG Fu-li
- 27
- Behavior of titanium dioxide in alumina carbothermic
reduction-chlorination process in vacuum - ZHU Fu-long,YUAN Hai-bin, YU Qing-chun, YANG Bin,
XU Bao-qiang, DAI Yong-nian
- 28
- Oxidation process of low-grade vanadium slag in presence of Na2CO3
- LI Xin-sheng, XIE Bing, WANG Guang-en, LI Xiao-jun
- 29
- Effect of degree of substitution of carboxymethyl starch on
diaspore depression in reverse flotation - LI Hai-pu, ZHANG Sha-sha, JIANG Hao, LI Bin, LI Xing
- 30
- Dynamics simulation of tertiary amines adsorbing on kaolinite (001) plane
- LIU Chang-miao, FENG An-sheng, GUO Zhen-xu, CAO Xue-feng, HU Yue-hua
- 31
- Effect of potential on characteristics of
surface film on natural chalcopyrite - YU Juan, YANG Hong-ying, FAN You-jing
- 32
- Density functional theory study of influence of impurity on
electronic properties and reactivity of pyrite - LI Yu-qiong, CHEN Jian-hua, CHEN Ye, GUO Jin
- 33
- Mechanical stirring for highly efficient gas injection refining
- LIU Yan, ZHANG Ting-an, Masamichi SANO, WANG Qiang, REN Xiao-dong, HE Ji-cheng
- 34
- Preparation of cerium oxide based environment-friendly chemical
conversion coating on magnesium alloy with additives - CHEN Dong-chu, WU Jian-feng, LIANG Yi-qing, YE Shu-lin, LI Wen-fang
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9