ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 22 No. 2 February 2012
Structural Materials
- 1
- Phase equilibria of Mg-rich corner in Mg−Zn−Al ternary system at 300 °C
- REN Yu-ping, QIN Gao-wu, PEI Wen-li, LI Song, GUO Yun, ZHAO Hong-da
- 2
- Modeling of strain hardening and dynamic recrystallization of
ZK60 magnesium alloy during hot deformation - HE Yun-bin, PAN Qing-lin, CHEN Qin, ZHANG Zhi-ye, LIU Xiao-yan, LI Wen-bin
- 3
- Low temperature quasi-superplasticity of ZK60 alloy
prepared by reciprocating extrusion - YANG Wen-peng, GUO Xue-feng, YANG Kai-jun
- 4
- Structure stability and mechanical properties of
high-pressure die-cast Mg−Al−Ce−Y-based alloy - ZHANG Jing-huai, LIU Shu-juan, LENGZhe, ZHANG Mi-lin, MENG Jian, WU Rui-zhi
- 5
- Quench sensitivity and microstructure character of high strength AA7050
- LI Pei-yue, XIONG Bai-qing, ZHANG Yong-an, LI Zhi-hui, ZHU Bao-hong, WANG Feng, LIU Hong-wei
- 6
- Characterization of cast A356 alloy reinforced with nano SiC composites
- Ali MAZAHERY, Mohsen Ostad SHABANI
- 7
- Microstructure and properties of Cu/Al joints brazed with Zn−Al filler metals
- JI Feng, XUE Song-bai, LOU Ji-yuan, LOU Yin-bin, WANG Shui-qing
- 8
- Process forces and heat input as function of
process parameters in AA5083 friction stir welds - Rajneesh KUMAR, Kanwer SINGH, Sunil PANDEY
- 9
- Interface characteristic of friction stir welding lap joints of
Ti/Al dissimilar alloys - CHEN Yu-hua, NI Quan, KE Li-ming
- 10
- Effect of Ti−Si−Mg−Al wire on microstructure and
mechanical properties of plasma arc in-situ welded joint of SiCp/Al composites - LEI Yu-cheng, XUE Hou-lu, HU Wen-xiang, YAN Jiu-chun
- 11
- Evaluation of diffusion and phase transformation at
Ag/Al bimetal produced by cold roll welding - Hossein OLIA, Mehrdad ABBASI, Seyed Hossein RAZAVI
- 12
- Effects of P and B addition on as-cast microstructure and
homogenization parameter of Inconel 718 alloy - MIAO Zhu-jun, SHAN Ai-dang, WU Yuan-biao, LU Jun, HU Ying, LIU Jun-liang, SONG Hong-wei
- 13
- Microstructure and shear strength of
reactive brazing joints of TiAl/Ni-based alloy - LI Hai-xin, HE Peng, LIN Tie-song, PAN Feng, FENG Ji-cai, HUANG Yu-dong
- 14
- Bi-modal microstructure in a powder metallurgical ferritic steel
- LIU Feng, LIU Yong, WU Hong, FANG Jing-hua, ZHAO Da-peng, ZHANG Liu-jie, LIU Dong-hua
Functional Materials
- 15
- A novel, environmentally friendly and facile method for
oxidative energy storage in nickel hydroxide film electrodes - FANG Wen-bin, LIAN Hui-qin, WANG Jian-ming, XU Lei, ZHANG Li-ying, ZHANG Jian-qing, JU Chun-shan
- 16
- Influence of europium doping on conductivity of LiNiPO4
- M. PRABU, S. SELVASEKARAPANDIAN, A. R. KULKARNI, S. KARTHIKEYAN, C. SANJEEVIRAJA
- 17
- Enhanced plasticity of Fe-based bulk metallic glass by tailoring microstructure
- GUO Sheng-feng, WANG Jing-feng, ZHANG Hong-ju, XIE Sheng-hui
- 18
- Influence of pyrolytic carbon coatings on complex permittivity and
microwave absorbing properties of Al2O3 fiber woven fabrics - DING Dong-hai, ZHOU Wan-cheng, LUO Fa, ZHU Dong-mei
- 19
- Preparation and characterization of composite microspheres of
nano zinc ferrite/poly (D, L-lactide-co-alanine) - CAO Lei-jian, ZHOU Qing-hua,GU Li, SHEN Hong-xia, LI Qing-hua, LAN Ping, FANG Yan
- 20
- Preparation and tribological properties of surface modified Cu nanoparticles
- YANG Guang-bin, CHAI Shan-tao, XIONG Xiu-juan, ZHANG Sheng-mao, YU Lai-gui, ZHANG Ping-yu
- 21
- Synthesis and upconversion luminescence of Lu2O3:Yb3+,Tm3+ nanocrystals
- LI Li, CAO Xue-qin, ZHANG You, GUO Chang-xin
- 22
- Low-temperature NO2 sensors based on
polythiophene/WO3 organic-inorganic hybrids - GUO Xian-zhi, KANG Yan-fei, YANG Tai-li, WANG Shu-rong
Computational Materials Science and Numerical Mode
- 23
- Structural, magnetic and electronic properties of
FeF2 by first-principle calculation - YANG Zhen-hua, WANG Xian-you, LIU Li, SU Xu-ping
- 24
- Effect of forced lamina flow on microsegregation simulated by
phase field method quantitatively - WANG Jun-wei, WANG Zhi-ping,LU Yang, ZHU Chang-sheng, FENG Li, XIAO Rong-zhen
- 25
- Temperature and stress fields in electron beam welded Ti-15-3 alloy to
304 stainless steel joint with copper interlayer sheet - ZHANG Bing-gang, WANG Ting, DUAN Xiao-hui, CHEN Guo-qing, FENG Ji-cai
- 26
- Effect of configuration on magnetic field in cold crucible using for
continuous melting and directional solidification - CHEN Rui-run, YANG Jie-ren, DING Hong-sheng, HUANG Feng, SU Yan-qing, GUO Jing-jie, FU Heng-zhi
- 27
- Optimization of AZ80 magnesium alloy squeeze cast process parameters
using morphological matrix - GUO Zhi-hong, HOU Hua, ZHAO Yu-hong, QU Shu-wei
Mine Engineering, Metallurgical Engineering, Chemi
- 28
- Effect of induction unloading on weakening of rock mechanics properties
- GAO Feng, ZHOU Ke-ping, LUO Xian-wei, ZHAI Jian-bo
- 29
- Bayes discriminant analysis method to identify risky of
complicated goaf in mines and its application - HU Yu-xi, LI Xi-bing
- 30
- Support vector machines approach to mean particle size of
rock fragmentation due to bench blasting prediction - SHI Xiu-zhi, ZHOU Jian, WU Bang-biao, HUANG Dan, WEI Wei
- 31
- Experimental measurements of short-term adsorption of
Acidithiobacillus ferrooxidans onto chalcopyrite - WANG Zhao-hui, XIE Xue-hui, LIU Jian-she
- 32
- Thermodynamic model for equilibrium solubility of gibbsite in
concentrated NaOH solutions - LI Xiao-bin, YAN Li, ZHOU Qiu-sheng, LIU Gui-hua, PENG Zhi-hong
- 33
- Red-mud treatment using oxalic acid by UV irradiation assistance
- YU Zhang-long, SHI Zhi-xia, CHEN Yong-mei, NIU Yin-jian, WANG Yong-xia, WAN Ping-yu
- 34
- Thermodynamics and mechanism of vanadium(IV) extraction from sulphate medium with D2EHPA, EHEHPA and CYANEX 272 in kerosene
- LI Xing-bin,WEI Chang, WU Jun, LI Cun-xiong, LI Min-ting, DENG Zhi-gan, XU Hong-sheng
- 35
- Electrodeposition conditions of metallic nickel in electrolytic membrane reactor
- REN Xiu-lian, WEI Qi-feng, LIU Zhe, LIU Jun
- 36
- Removal of phenylalanine from water with
calcined CuZnAl−CO3 layered double hydroxides - JIAO Fei-peng, FU Zhao-di, SHUAI Li, CHEN Xiao-qing
- 37
- Synthesis of aluminum tri-polyphosphate anticorrosion
pigment from bauxite tailings - LU Qing-hua, HU Yue-hua
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9