ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 22 No. 2 December 2012
New Forming Technology
- 1
- Optimization of cold forging perform tools using Pseudo Inverse Approach
- Ali HALOUANI, Yu-ming LI, ABBES Boussad, Ying-qiao GUO
- 2
- Machine and tool development for forming of polymeric tubular micro-components
- Jie ZHAO, Arthur Lan Kuan YIP, Yi QIN, Akhtar RAZALI, Zhi-cong FEI
- 3
- Prediction of texture evolution under varying deformation states through crystal plasticity finite element method
- LI Hong-wei, YANG He
- 4
- A new approach to investigate real flow stress in micro-extrusion
- LIN Jun-feng, LI Feng, ZHANG Jin-feng
- 5
- Critical blank-holder force in axisymmetric deep drawing
- QIN Si-ji, XIONG Bai-qing, LU Hong, ZHANG Ting-ting
- 6
- FE analysis for radial spread behavior in three-roll cross rolling with small-hole and deep-groove ring
- QIAN Dong-sheng, HUA Lin, DENG Jia-dong
- 7
- Development of thermal deep drawing system with vacuum environment for difficult-to-deformation materials
- MENG Bao, WAN Min, WU Xiang-dong, ZHOU Ying-ke
- 8
- Residual stress field induced by shot peening based on random-shots for 7075 aluminum alloy
- SHENG Xiang-fei, XIA Qin-xiang, CHENG Xiu-quan, LIN Lie-shu
- 9
- Drawability of thin magnetron sputtered Al-Zr foils in micro deep drawing
- Gerrit BEHRENS, Julien KOVAC, Bernd KÖHLER, Frank VOLLERTSEN, Heinz-Rolf STOCK
- 10
- Characterization of plastic behaviour of sheet metals by hydraulic bulge test
- Lucian L&#;Z&#;RESCU, Dan-sorin COM&#;A, Ioan NICODIM, Ioan CIOBANU, Dorel BANABIC
- 11
- Mechanics condition of thin-walled tubular component with rib hydroforming
- CHU Guan-nan, YANG Shuai, WANG Jian-xun
- 12
- Springback mechanism and compensation of cryogenic Ti alloy tube after numerically controlled bending
- ZHAN Mei, ZHAI Hua-dong, YANG He
- 13
- Plastic damage of T-shape hydroforming
- TENG Bu-gang, YUAN Shi-jian, CHEN Zeng-tao, JIN Xue-run
- 14
- Pre-bulging effect during sheet hydroforming process of aluminum alloy box with unequal height and flat bottom
- LANG Li-hui, WANG Yong-ming, XIE Ya-su, YANG Xi-ying, XU Ying-qiang
- 15
- Welded double sheet hydroforming of complex hollow component
- LIU Wei, CHEN Yi-zhe, LIU Gang, CUI Xiao-lei
- 16
- Advanced feature detection algorithms for incrementally formed sheet metal parts
- Amar Kumar BEHERA, Bert LAUWERS, Joost R. DUFLOU
- 17
- Ultrasonic thickness measurement for aluminum alloy irregular surface parts based on spectral analysis
- CONG Sen, GANG Tie
- 18
- Control strategy of over-bending setting round for pipe-end of large pipes by mould press type method
- ZHAO Jun, ZHAN Pei-pei, MA Rui, ZHAI Rui-xue
Forming of New Materials
- 19
- Experimental measurement and theoretical prediction of forming limit curve for aluminum alloy 2B06
- LI Xiao-qiang, SONG Nan, GUO Gui-qiang
- 20
- Comparative analysis between stress- and strain-based forming limit diagrams for aluminum alloy sheet 1060
- FANG Gang, LIU Qing-jun, LEI Li-ping, ZENG Pan
- 21
- Plastic deformation on hydroforming of aluminum alloy tube with rectangular sections
- WANG Xiao-song, YUAN Shi-jian, SONG Peng, XIE Wen-cai
- 22
- Springback law of thin-walled 6061-T4 Al-alloy tube upon bending
- LI Heng, SHI Kai-peng, YANG He, TIAN Yu-li
- 23
- Formability and microstructure of AA6061 Al alloy tube for hot metal gas forming at elevated temperature
- HE Zhu-bin, FAN Xiao-bo, SHAO Fei, ZHENG Kai-lun, WANG Zhi-biao, YUAN Shi-jian
- 24
- Effect of pre-deformation on microstructure and mechanical properties of 2219 aluminum alloy sheet by thermomechanical treatment
- AN Li-hui, CAI Yang, LIU Wei, YUAN Shi-jian, ZHU Shi-qiang, MENG Fan-cheng
- 25
- Effect of internal pressure on corner radius and thickness distribution of shear hydro-bending of 5A02 aluminum alloy tube
- WANG Yong, HAN Cong, YUAN Shi-jian
- 26
- Shear hydro-bending of 5A02 aluminum alloys rectangular tubes
- HAN Cong, XU Yong-chao, WANG Yong, ZANG Chao, YUAN Shi-jian
- 27
- Deformation behavior of 5A06 aluminum alloy sheet for rapid gas forming at elevated temperature
- FAN Xiao-bo, HE Zhu-bin, YUAN Shi-jian
- 28
- Influence of interfacial adhesion strength on formability of AA5052/polyethylene/AA5052 sandwich sheet
- LIU Jian-guang, LIU Wei, WANG Jing-xuan
- 29
- Effect of equal channel angular pressing and torsion on SiC-particle distribution of SiCp-Al composites
- LI Ping, ZHANG Xiang, XUE Ke-min, LI Xiao
- 30
- Warm hydroforming of magnesium alloy tube with large expansion ratio within non-uniform temperature field
- LIU Gang, ZHANG Wen-da, HE Zhu-bin, YUANShi-jian, LIN Zhe
- 31
- Springback characteristics of AZ31 magnesium alloy as-extruded profile in warm tension-rotation bending process
- XIAO Han, ZHANG Shi-hong, ZHOU Rong, LU De-hong
- 32
- Microstructure and properties of AZ80 alloy semisolid billets fabricated by new strain induced melt activated method
- JIANG Ju-fu, WANG Ying, DU Zhi-ming, LUO Shou-jing
- 33
- Microstructural evolution and mechanical properties of ZK60 magnesium alloy prepared by multi-axial forging during partial remelting
- TAO Jian-quan, CHENG Yuan-sheng, HUANG Shao-dong, PENG Fei-fei, YANG Wen-xuan,
LU Mei-qi, ZHANG Zhi-ming, J
- 34
- Spheroidal microstructure formation and thixoforming of AM60B magnesium alloy prepared by SIMA process
- WANG Li-ping, JIANG Wen-yong, CHEN Tian, FENG Yi-cheng,
ZHOU Hong-yu, ZHAO Si-cong, LIANG Zhen-qiang, ZHU Yan
- 35
- Microstructures and mechanical properties of pure magnesium bars by high ratio extrusion and its subsequent annealing treatment
- SUN Hong-fei, LI Cheng-jie, XIE Yang, FANG Wen-bin
- 36
- Microstructure evolution and mechanical properties of AZ80 alloy reheated from as-cast and deformed states
- ZHAO Gao-zhan , YANG Lin , DUAN Xun-xing, REN Xiao-hua, ZHU Li-min,
YANG Ting-jun, GUO Xiang-yong, HAO Shao-
- 37
- Modelization and comparison of Norton-Hoff and Arrhenius constitutive laws to predict hot tensile behavior of Ti-6Al-4V alloy
- ZHANG Chao, LI Xiao-qiang, LI Dong-sheng, JIN Chao-hai, XIAO Jun-jie
- 38
- Hot deformation behavior of in-situ TiBw/Ti6Al4V composite with novel network reinforcement distribution
- ZHANG Yu-zi, HUANG Lu-jun, LIU Bao-xi, GENG Lin
- 39
- Superplastic forming Ti-6Al-4V titanium alloy cylinder with near uniform thickness distribution
- JIANG Shao-song, LU Zhen, HE Xiao-dong, WANG Guo-feng, ZHANG Kai-feng
- 40
- Mechanical properties and formability of TA2 extruded tube for
hot metal gas forming at elevated temperature - HE Zhu-bin, TENG Bu-gang, CHE Chang-yong, WANG Zhi-biao, ZHENG Kai-lun, YUAN Shi-jian
- 41
- Effect of sintering neck on compressive mechanical properties of porous titanium
- ZOU Chun-ming, Liu Yan, YANG Xin, WANG Hong-wei, WEI Zun-jie
- 42
- Characterization of TiAl-based alloy with high-content Nb by powder metallurgy
- SUN Hong-fei, LI Xue-wen, FENG Jie, FANG Wen-bin
- 43
- Smart hot stamping of ultra-high strength steel parts
- Ken-ichiro MORI
- 44
- Influence of asymmetric hot rolling on microstructure and rolling force with austenitic steel
- Jie LIU, Rudolf KAWALLA
- 45
- Manufacturing of complex high strength components out of high nitrogen steels at industrial level
- Hannes NONEDER, Marion MERKLEIN
- 46
- Dynamic recrystallization rules in needle piercing extrusion for
AISI304 stainless steel pipe - GUO Liang-gang, DONG Ke-ke, ZHANG Bao-jun, YANG He, ZHENG Wen-da , LIU Xiong-wei
- 47
- 3D numerical analysis of material flow behavior and flash formation of 45# steel in continuous drive friction welding
- JI Shu-de, LIU Jian-guang, YUE Yu-mei, LÜ Zan, FU Li
- 48
- Effect of tool temperature and punch speed on hot stamping of ultra high strength steel
- LIU Wei, LIU Hong-sheng, XING Zhong-wen, LIU Gang, BAO Jun
- 49
- Hot formation quality of high strength steel BR1500HS for hot stamping without cooling system
- LIU Hong-sheng, XING Zhong-wen, LEI Cheng-xi
- 50
- Magnetic pulse joining of aluminum alloy-carbon steel tubes
- YU Hai-ping, XU Zhi-dan, JIANG Hong-wei, ZHAO Zhi-xue, LI Chun-feng
- 51
- Cold-pressing deformation characteristics of steel-aluminum sheets joining
- LI Feng, LIN Jun-feng, SUI Xiao-chong, BIAN Nan, XU Ming-da
- 52
- Wrinkling behavior of hydro bending of carbon steel/Al-alloy bi-layered tubes
- TENG Bu-gang, HU Lan, LIU Gang, YUAN Shi-jian
- 53
- Compressive property and energy absorption characteristic of 3D open-cell Ni-Cr-Fe alloy foams under quasi-static conditions
- PANG Qiu, WU Gao-hui, SUN Dong-li, XIUZi-yang, ZHANG Qiang, HUZhi-li
- 54
- Size effect on indentation depth of oxygen-free high purity copper induced by laser shock processing
- HU Yong-xiang, LI Kang-mei, QI Chen-jie, YAO Zhen-qiang, Ramana V. GRANDHI
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9