ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 22 Sepecial 3 December 2012
- 1
- HR-TEM and FIB-SEM characterization of formation of eutectic-like structure from amorphous GdAlO3-Al2O3 system
- Y. H. HAN, Y. HARADA, J. F. SHACKELFORD, Jaehyung LEE, K. KAKEGAWA
- 2
- Effects of elastic-plastic properties of materials on residual indentation impressions in nano-indentation using sharp indenter
- Jung-Min LEE, Chan-Joo LEE, Kyung-Hun LEE, Byung-Min KIM
- 3
- Weldability evaluation and tensile strength estimation model for aluminum alloy lap joint welding using hybrid system with laser and scanner head
- Dong-Yoon KIM, Young-Whan PARK
- 4
- Material properties of friction stir spot welded joints of dissimilar aluminum alloys
- Chi-Sung JEON, Sung-Tae HONG, Yong-Jai KWON, Hoon-Hwe CHO, Heung Nam HAN
- 5
- Effect of SiC particles on microstructure and mechanical property of friction stir processed AA6061-T4
- Don-Hyun CHOI, Yong-Il KIM, DAE-Up KIM, Seung-Boo JUNG
- 6
- Friction stir butt welding of A5052-O aluminum alloy plates
- Sung-Ook YOON, Myoung-Soo KANG, Hyun-Bin NAM, Yong-Jai KWON, Sung-Tae HONG, Jin-Chun KIM, Kwang-Hak LEE, Chang-Yong
- 7
- Influence of tool plunge depth and welding distance on friction stir lap welding of AA5454-O aluminum alloy plates with different thicknesses
- Jun-Won KWON, Myoung-Soo KANG, Sung-Ook YOON, Yong-Jai KWON, Sung-Tae HONG, Dae-Il KIM, Kwang-Hak LEE, Jong-Dock SEO
- 8
- Influences of tool plunge speed and tool plunge depth on friction spot joining of AA5454-O aluminum alloy plates with different thicknesses
- Sung-Ook YOON, Myoung-Soo KANG, Yong-Jai KWON, Sung-Tae HONG, Dong-Hwan PARK, Kwang-Hak LEE, Chang-Yong LIM, Jong-D
- 9
- Fabrication of SiCp/AA5083 composite via friction stir welding
- Byung-Wook AHN, Don-Hyun CHOI, Yong-Hwan KIM, Seung-Boo JUNG
- 10
- Microstructures of brazing zone between titanium alloy and stainless steel using various filler metals
- Taeshin CHUNG, Jungsoo KIM, Jeongseok BANG, Byoungho RHEE, Daegeun NAM
- 11
- Effect of bonding interface on delamination behavior of drawn Cu/Al bar clad material
- Sangmok LEE, Min-Geun LEE, Sang-Pill LEE, Geun-Ahn LEE, Yong-Bae KIM, Jong-Sup LEE, Dong-Su BAE
- 12
- Effect of strain, strain rate and temperature on workability of AZ80 wrought magnesium alloy
- Lü Wen-quan, QUAN Guo-zheng, YU Chun-tang, ZHAO Lei, ZHOU Jie
- 13
- Microforming of superplastic 5083 aluminum alloy
- Md. Abu Mowazzem HOSSAIN, Sung-Tae HONG, Kyu-Yeol PARK, Young-Sang NA
- 14
- Effect of alloying on high temperature fatigue performance of ZL114A (Al-7Si) alloy
- DONG Xu-gang, ZHOU Jie, JIA Yao-jun, LIU Bin
- 15
- Determination of critical parameters for dynamic recrystallization in Ti-6Al-2Zr-1Mo-1V alloy
- XIA Yu-feng, LIU Ying-ying, MAO Yuan-ping, QUAN Guo-zheng, ZHOU Jie
- 16
- Grain size dependence of flow stress in ECAPed Ti with constant texture
- Chang-Young HYUN, Ho-Kyung KIM
- 18
- Laser-assisted deposition of Cu bumps for microelectronic packaging
- Won-Seok CHOI, Joohan KIM
- 19
- Microstructure of porous Cu fabricated by freeze-drying process of CuO/camphene slurry
- Sung-tag OH, Si-young CHANG, Myung-jin SUK
- 20
- Improvement of mechanical properties of Sn-58Bi alloy with multi-walled carbon nanotubes
- HE Peng, Lü Xiao-chun, LIN Tie-song, LI Hai-xin, AN Jing, MA Xin, FENG Ji-cai, ZHANG Yan, LI Qi
- 21
- Modification of mechanical properties by TiO2 nano-particle for biodegradable materials made from palm oil sludge and activated sludge cake
- Panithi YUTHAVISUTHI, Lerpong JARUPAN, Chiravoot PECHYEN
- 22
- Synthesis of Fe3O4-coated silica aerogel nanocomposites
- Jun Sung LEE, Eun Jung LEE, Hae Jin HWANG
- 23
- Synthesis of tin nanoparticles through modified polyol process and effects of centrifuging and drying on nanoparticles
- Sang-Soo CHEE, Jong-Hyun LEE
- 24
- Effective parameters on diameter of carbon nanotubes by plasma enhanced chemical vapor deposition
- Kang Young JEONG, Hyun Kyung JUNG, Hyung Woo LEE
- 25
- Polyaniline and multi-walled carbon nanotube composite electrode for rechargeable battery
- Yu-Jeong LIM, Min-Young PARK, Sang-Keol LEE , Won-Ki LEE , Nam-Ju JO
- 26
- Microstructure evolution and mechanical properties of Ti-B-N coatings deposited by plasma-enhanced chemical vapor deposition
- Jung Ho SHIN, Kwang Soo CHOI, Tie-gang WANG, Kwang Ho KIM, Roman NOWAK
- 27
- Synthesis and properties of Cr-Al-Si-N films deposited by hybrid coating system with high power impulsemagnetron sputtering (HIPIMS) and DC pulse sputtering
- Min Su KANG, Tie-gang WANG, Jung Ho SHIN, Roman NOWAK, Kwang Ho KIM
- 28
- Growth of BaTiO3-Ag hybrid composite films at room temperature by aerosol deposition
- Young Joon YOON, Sung Hwan CHO, Jihoon KIM, Hyo Tae KIM, Hong Koo BAIK, Jong-Hee KIM
- 29
- Effect of substrate bias on microstructure and tribological performance of GLC films using hybrid HIPIMS technique
- ZHANG Xue-qian, KE Pei-ling, WANG Ai-ying, HUANGMei-dong, Kwang Ho KIM
- 30
- Comparison of electrochemical properties of atmospheric pressure plasma coatings for Al2O3-3TiO2 and CoNiCrAlY in sea water
- Seong-jong KIM, Seong-kweon KIM, Jae-cheul PARK
- 31
- Electrochemical characteristics of HVOF spray coated layer with WC-27NiCr and WC-10Co4Cr for Al bronze
- Min-su HAN, Seung-jun LEE, Min-sung KIM, Seok-ki JANG, Seong-jong KIM
- 32
- Corrosion resistance of composite coating on magnesium alloy using combined microarc oxidation and inorganic sealing
- YANG Wei, WANG Ai-ying, JIANG Bai-ling
- 33
- Ultrasonic-assisted vibration tapping using taps with different coatings
- Chung-chen TSAO, Kei-lin KUO
- 34
- Wear characteristics of V shape diamond tool for micro prism pattern with Al alloys
- Eun-Suk PARK, Tae-Jin JE, Hwan-JinCHOI, Eun-ChaeJEON, Myung-Chang KANG
- 35
- Machining performance on hybrid process of abrasive jet machining and electrical discharge machining
- Yan-cherng LIN, Yuan-feng CHEN, A-cheng WANG, Wan-lin SEI
- 36
- Material properties and machining performance of hybrid Ti2AlN bulk material for micro electrical discharge machining
- Eui-Seong CHOI, Jinwoo SUNG, Qi-min WANG, Kwang-Ho KIM, Ahmed BUSNAINA, Myung Chang KANG
- 37
- Diamond machining of sinusoidal grid surface using fast tool servo system for fabrication of hydrophobic surface
- Hong LU, Deug-Woo LEE, Sang-Min LEE, Jeong-Woo PARK
- 38
- Rotary ultrasonic-assisted milling of brittle materials
- KUO Kei-lin, TSAO Chung-chen
- 39
- Surface effects of hybrid vibration-assisted femtosecond laser system for micro-hole drilling of copper substrate
- Jung-Kyu PARK, Ji-Woon YOON, Myung-Chang KANG, Sung-Hak CHO
- 40
- Internal modification in transparent hybrid germanium-silica plates using plasma formation induced by a femtosecond laser
- Ji-Wook YOON, Jung-Kyu PARK, Kwang-Ho KIM, Myung-Chang KANG, Sung-Hak CHO
- 41
- Process analysis of direct laser melting to fabricate layered hybrid beads
- Jeong-hwan JANG, Sung-min MUN, Tae-hyun KIM, Young-hoon MOON
- 42
- Microstructure of fast tool servo machining on copper alloy
- Hong LU, Soo-chang CHOI, Sang-min LEE, Deug-woo LEE
- 43
- An effective round ball tool in electrochemistry process as novel reuse fabrication technology
- P. S. PA
- 44
- FEA technique of hot plate forming process using cell-typed die with cooling device
- Jung-Min LEE, In-Kyu LEE, Kyung-Hun LEE, Dae-Soon KIM, Byung-Min KIM
- 45
- Deformation prediction of porcelain-enameled steels with strain history by press forming and high-temperature behavior of coating layer
- Young-Ki SON, Chan-Joo LEE, Jung-Min LEE, Byung-Min KIM
- 46
- Mathematical model determination for improvement of surface roughness in magnetic-assisted abrasive polishing of nonferrous AISI316 material
- Jae-Seob KWAK
- 47
- Development of micro milling force model and cutting parameter optimization
- Shih-ming WANG, Da-fun CHEN, Min-chang JANG, Shambaljamts TSOOJ
- 48
- Thermal deformation of aluminum alloy casting materials for tire mold by numerical analysis
- Hee-Sung YOON, Je-Se CHOI, Yool-Kwon OH
- 49
- Experiments and computer simulation analysis of impact behaviors of micro-sized abrasive in waterjet cutting of thin multiple layered materials
- Jung-Han LEE, Kang-Su PARK, Myung Chang KANG, Bo Sik KANG, Bo Sung SHIN
- 50
- Reactive wetting phenomena of MgO-C refractories in contact with CaO-SiO2 slag
- Seon-Hwa HEO, Kyuyong LEE, Yongsug CHUNG
- 51
- Effect of pulse time on surface characteristics and corrosion resistance during pulse electrochemical polishing
- Young-Bin KIM, Jeong-Woo PARK
- 52
- Electrochemical characteristics of Al-Mg and Al-Mg-Si alloy in sea water
- Seong-jong KIM, Seung-jun LEE, Jae-yong JEONG, Kyu-hwan KIM
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9