ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 16 Sepecial 2 September 2006
Selected Papers from The 6th International Workshop on Advanced Intermetallic and Metallic Materials
- 1
- Oxidation behavior of Ni(Co)CrAlYHf(Si) coatings on DS superalloy at 1 150 ℃
- 黄朝晖，谭永宁，赵希宏，李建平，张强
- 2
- Microstructures and properties of graphite and Al2O3 short fibers reinforced Mg-Al-Zn alloy hybrid composites
- 刘勇兵，宋起飞，安健
- 3
- Incomplete transformation of Ti-Ni-X ternary shape memory alloy
- 何向明，张淑芳，李明升，多树旺，向军淮，张荣发
- 4
- Oxidation and thermal fatigue of EB-PVD thermal barrier coatings on tube superalloy substrate
- ZHANG Chun-xia，ZHOU Chun-gen，GONG Sheng-kai，XU Hui-bin
- 6
- Influence of surface modification on isothermal oxidation behavior of EB-PVD NiAl coating
- 陶淑风，江阔，A. HESNAWI，宫声凯
- 10
- Microstructure of reactive sintered Al bonded Si3N4-SiC ceramics
- 崔崇，王媛婷，江金国，陈光，孙强金
- 11
- Application of an analytical phase transformation model
- 王海丰，杨长林，陈正，杨伟，杨根仓
- 12
- Phase and microstructure selection in directionally solidified peritectic alloys with convection
- 苏彦庆，李新中，郭景杰，吴士平，丁宏生，傅恒志，傅恒志
- 14
- Direct electroless Ni-P deposition on AM50 magnesium alloy from sulfate bath
- 李光玉，连建设，牛丽媛，江中浩，谷长栋
- 15
- Microstructure and property of zinc phosphate coating on die-casting magnesium alloy AZ91D
- 李光玉，连建设，牛丽媛，江中浩
- 16
- Oxidation and corrosion behavior of titanium aluminum nitride coatings by arc ion plating
- 李明升，冯长杰，张志峰，王福会
- 19
- Undercooling and rapid solidification of Nb-Si eutectic alloys studied by long drop tube
- 王育人，董树勇，魏炳忱，李维火
- 20
- Cathode electrophoretic technology for bonded NdFeB permanent magnet
- 陈刚，陈刚，杨小玲，高淡英，倪建森，徐晖，周邦新
- 21
- Preparation technology and magnetic properties of Nd9.5Fe77B6Co5Zr2.5 nanocomposite magnets
- 黄照华，倪健森，徐晖，王占勇，周邦新
- 23
- Combining cellular automata and Monte Carlo algorithm to simulate three-dimensional grain growth
- Wang Wei
- 24
- Carbon solubility in Cu-based composite prepared by mechanical alloying
- 冉旭，刘勇兵，包晓军，刘学然，安健
- 25
- Influence of powder characteristics on structure and properties of Ni3Al fabricated by spark plasma sintering
- 孟杰，贾成厂，何箐
- 27
- Creep behavior and microstructure evolution of directionally solidified superalloy IC10 at high temperature
- 赵希宏，黄朝辉，孙跃军，徐惠彬
- 29
- Effect of Nb in (La0.5Ce0.5)64-xAl16Ni5Cu15Nbx (x=0-5) bulk metallic glasses
- 张国庆，刘金芳，曾乔石，蒋建中，汪丽娜，刘今强
- 30
- TEM microstructure of mechanically alloyed Ti-12Mg powders
- T. S. KIM，J. C. BAE，B. T. LEE，J. P. AHN，J. K. PARK
- 32
- Influence of coupling with calculation of phase diagrams on microsegregation forming simulation of Al-4.5%Cu alloy
- 刘永刚，陈光，孙国雄
- 33
- Continuous and directional solidification technology of titanium alloys with cold crucible
- 陈瑞润，丁宏升，毕维生，傅恒志，郭景杰
- 34
- Inhomogeneity and anisotropy of microstructure and mechanical properties in severe plastic deformation processed pure copper
- 康锋，王经涛，杜忠泽
- 35
- Preparation of Ti-based amorphous brazing alloy
- 邹家生，蒋志国，许志荣，陈光
- 36
- Thermal stability of Al-Mg-Sc-Zr alloy
- 赵卫涛，闫德胜，戎利建
- 37
- Modified cellular automaton model for modeling of microstructure and microsegregation in solidification of ternary alloys
- 朱鸣芳，CAO Wei-sheng，XIE Fan-you，CHANG Y. Austin，CHEN Shuang-lin，HONG Chun-pyo
- 38
- Insensitivity on tensile properties of forged Mg-13Li-X alloy to hot-rolling deformation
- 栗丽，李焕喜，周铁涛，陈昌麒，邬秋林，章清泉，傅祖明
- 39
- Optimization of mechanical properties of cast NiAl-28Cr-5.5Mo-0.5Hf alloy
- 郭建亭，高强，淮凯文，李虎田，李谷松
- 41
- Ultrahigh performance of Ti-based glassy alloy tube sensor for Coriolis mass flowmeter
- 马朝利，A. Inoue，张涛
- 42
- Isothermal corrosion (γ′+γ) Ni3Al alloy in liquid zinc
- 王文俊，王艳丽，陈国良，林均品
- 43
- Influence of low-temperature nitridation on low-frequency magnetization of Fe82Nb7B10Cu1 nanocrystalline alloy ribbons
- 徐锋，吴小玲，李山东，彭坤，陈光，都有为
- 45
- 3D finite element method analysis of deformation and temperature rise during equal-channel angular pressing
- 张新平，陈光，汪雪，林杰，吴媚
- 46
- Microstructural evolution in high Nb containing TiAl alloys by reactive hot pressing
- 王衍行，林均品，王艳丽，陈国良，贺跃辉
Selected Papers from The 5th International Forum on Advanced Material Science and Technology
- 47
- Effect of shot peening and grit blasting on surface integrity: Influence on residual stresses
- K.TOSHA，LU Jian
- 48
- Manipulation of space charge in silicon by intentional thermal donor activation
- E. TUOMINEN，HARKONEN，P. LUUKKA，K.TOSHA
- 50
- Biocompatibility and preliminary clinical application of HA/HDPE nanocomposites synthetic auditory ossicle
- 朱晒红，王国慧，赵颜忠，戚悠飞，周科朝，黄伯云，黄苏萍，李志友
- 51
- Effect of stoichiometric ratio upon electrochemical properties of AB5-type alloys
- 于丽敏，傅钟臻，傅钟臻，蒋文全，蒋利军，张文广
- 53
- Dynamic recrystallization behavior of commercial pure aluminum
- 李慧中，张新明，陈明安，张新明，陈明安，刘子娟
- 54
- Solvothermal synthesis of grain size controlled nanocrystalline SnO2
- 徐盛明，徐盛明，陈崧哲，吴芳，李林艳
- 55
- Preparation and characterization of LiFePO4 thin films as cathode materials for lithium ion battery
- 肖卓炳，麻明友
- 56
- Ploughing-extrusion mechanism of V-shaped capillary micro-grooves based on surface of copper strip
- 池勇，陈锦昌，邓学雄，刘小康，刘晓晴，汤勇，刘林
- 57
- Formation mechanism of external finned tubes by extrusion-plough method
- 汤勇，陆龙生，潘敏强，刘小康，刘晓晴
- 58
- Solution-deposited Li4Ti5O12 thin films as anode for lithium ion battery
- 吴显明，麻明友，陈上，肖卓炳，何则强，刘建本
- 59
- Zn-Ni double metal cyanide complex: A novel effective catalyst for copolymerization of propylene oxide and carbon dioxide
- 陈上，肖卓炳，麻明友，刘建本，张兴宏，戚国荣
- 60
- Electrochemical characteristics of Sn-Al-P-B composites synthesized by rheological technique
- 何则强，肖卓炳，熊利芝，何则强，麻明友，陈上，吴显明
- 62
- Phase field model for strong anisotropy of kinetic and highly anisotropic interfacial energy
- 张国伟，侯华，程军
- 64
- Computer simulation for precipitation process of θ (Ni3V) and γ′ (Ni3Al) with microscopic phase-field method
- 侯华，徐宏，徐宏，赵宇宏
- 65
- Microstructure evolution and effect on mechanical property in AZ80 Mg alloy during thermal processing
- 王强，张治民，李保成，李旭斌
- 66
- Mechanism of effect of rare earth oxides on high temperature corrosion resistance of weld metal
- 李志勇，王宝，张汉谦
- 68
- Modeling simulation and experimental validation for mold filling process
- 侯华，巨东英，D. SAITO，毛红奎
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9