ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 23 No. 5 May 2013
Structural Materials
- 1
- “Abnormal transient creep” in fine-grained Al-5356 alloy observed at low strain rates by high-resolution strain measurement
- Jun-jie SHEN, Kenichi IKEDA, Satoshi HATA, Hideharu NAKASHIMA
- 2
- Structural and corrosion characterization of biodegradable Mg-RE (RE=Gd, Y, Nd) alloys
- J. KUBáSEK, D. VOJTěCH
- 3
- Corrosion and electrochemical behavior of Mg-Y alloys in 3.5% NaCl solution
- Xin ZHANG, Yong-jun LI, kui ZHANG, Chang-shun WANG, Hong-wei LI, Ming-long MA, Bao-dong ZHANG
- 4
- Enhanced corrosion resistance of phytic acid coated magnesium by stearic acid treatment
- R. K. GUPTA, K. MENSAH-DARKWA, J. SANKAR, D. KUMAR
- 5
- Effect of ultrasonic vibration on Fe-containing intermetallic compounds of hypereutectic Al-Si alloys with high Fe content
- Chong LIN, Shu-sen WU, Gu ZHONG, Li WAN, Ping AN
- 6
- Materials flow and phase transformation in friction stir welding of Al 6013/Mg
- Pooya POURAHMAD, Mehrdad ABBASI
- 7
- Microstructure and mechanical properties of extruded Al/Al2O3 composites fabricated by stir-casting process
- H. R. EZATPOUR, M. TORABI-PARIZI, S. A. SAJJADI
- 8
- Optimization of process parameters for in situ casting of Al/TiB2 composites through response surface methodology
- K. NIRANJAN, P. R. LAKSHMINARAYANAN
- 9
- Influence of addition of Grp/Al2O3p with SiCp on wear properties of aluminum alloy 6061-T6 hybrid composites via friction stir processing
- A. DEVARAJU, A. KUMAR, B. KOTIVEERACHARI
- 10
- Influence of filling parameters on fatigue properties of A357 alloy produced by counter pressure plaster mold casting
- Qiang LI, Qi-tang HAO, Wan-qi JIE, Maijer DAAN
- 11
- Surface recrystallization of single crystal nickel-based superalloy
- Bing ZHANG, Xue-gang CAO, De-lin LIU, Xin-ling LIU
- 12
- Evolution of lamellar structure in Ti-47Al-2Nb-2Cr-0.2W alloy sheet
- Bin Lu, Lan Huang, Yong Liu, Xiao-peng Liang, Bin Liu, Yue-hui HE, Hui-zhong LI
- 13
- Influence of Zr content on microstructure and mechanical properties of implant Ti-35Nb-4Sn-6Mo-xZr alloys
- Shi-juan DAI, Yu WANG, Feng CHEN, Xin-quan YU, You-fa ZHANG
- 14
- Thermal properties of pressureless melt infiltrated AlN-Si-Al composites
- Ayse KALEMTAS, Gulsum TOPATES, Ozlem BAHADIR, Pinar KAYA ISCI, Hasan MANDAL
Functional Materials
- 15
- Effects of infiltration parameters on mechanical and microstructural properties of tungsten wire reinforced Cu47Ti33Zr11Ni6Sn2Si1 metallic glass matrix composites
- N. KHADEMIAN, R. GHOLAMIPOUR
- 16
- Improvement of thermally grown oxide layer in thermal barrier coating systems with nano alumina as third layer
- Mohammadreza DAROONPARVAR, Muhamad Azizi Mat YAJID, Noordin Mohd YUSOF, Saeed FARAHANY, Mohammad Sakhawat HUSSAIN, Hamid Reza BAKHSHESHI-RAD, Z. VALEFI, Ahmad ABDOLAHI
- 17
- Preparation, characterization and electrochemical properties of boron-doped diamond films on Nb substrates
- Zhi-ming YU, Jian WANG, Qiu-ping WEI, Ling-cong MENG, Shi-meng HAO, Fen LONG
- 18
- Analysis of phase in Cu-15%Cr-0.24%Zr alloy
- Li-ming BI, Ping LIU, Xiao-hong CHEN, Xin-kuan LIU, Wei LI, Feng-cang MA
- 19
- Hot deformation behavior of novel imitation-gold copper alloy
- An-yin ZHU, Jing-lin CHEN, Zhou LI, Li-yang LUO, Qian LEI, Liang ZHANG, Wan ZHANG
- 20
- Effects of ball milling time on porous Ti-3Ag alloy and its apatite-inducing abilities
- Le-gan HOU, Li LI, Yu-feng ZHENG
- 21
- Electrochemical discharging performance of 3D porous magnesium electrode in organic electrolyte
- Gang CHENG, Qiang XU, Xi ZHAO, Fei DING, Jing ZHANG, Xing-jiang LIU, Dian-xue CAO
- 22
- Preparation and oxidation behavior of a novel CeO2-modified chromizing coating
- Jian-feng SUN, Yue-bo ZHOU, Hai-jun ZHANG
- 23
- Influence of nano-CeO2 on coating structure and properties of electrodeposited Al/α-PbO2/β-PbO2
- Zhen CHEN, Qiang YU, Deng-hui LIAO, Zhong-cheng GUO, Jian WU
- 24
- Fabrication of titanium oxide films at low temperature from aqueous solution
- Wen-ning MU, Yu-chun ZHAI, Shuang-zhi SHI
- 25
- Influence of pH value and chelating reagent on performance of Li3V2(PO4)3/C cathode material
- Wei XIANG, Yan TANG, Yan-ying WANG, Ben-he ZHONG, Wei-mao FANG, Heng LIU, Xiao-dong GUO
- 26
- Electrochemical hydrogen storage characteristics of as-cast and annealed La0.8-xNdxMg0.2Ni3.15Co0.2Al0.1Si0.05 (x=0-0.4) alloys
- Yang-huan ZHANG, Zhong-hui HOU, Bao-wei LI, Hui-ping REN, Ying CAI, Dong-liang ZHAO
- 27
- Silicon/flake graphite/carbon anode materials prepared with different dispersants by spray-drying method for lithium ion batteries
- Jun LAI, Hua-jun GUO, Xiang-qun LI, Zhi-xing WANG, Xin-hai LI, Xiao-ping ZHANG, Si-lin HUANG, Lei GAN
- 28
- Enhanced thermal and electrical properties of poly (D,L-lactide)/multi-walled carbon nanotubes composites by in-situ polymerization
- Qing-hua LI, Qin-hua ZHOU, Dan DENG, Qiao-zhen YU, Li GU, Ke-da GONG, Ke-hang XU
Computational Materials Science and Numerical Modelling
- 29
- Constitutive model for thin sheet metal with one or several grains across thickness in micro-forming
- Qian WANG, Xiang-huai DONG, Hai-ming ZHANG, He-zong LI, Yu SHEN
- 30
- Identification of material parameters from punch stretch test
- Xiao-qiang LI, De-hua HE
- 31
- Optimum design of flow distribution in quenching tank for heat treatment of A357 aluminum alloy large complicated thin-wall workpieces by CFD simulation and ANN approach
- Xia-wei YANG, Jing-chuan ZHU,, Dong HE, Zhong-hong LAI, Zhi-sheng NONG, Yong LIU
- 32
- Defect assessment of welded specimen considering weld induced residual stresses using SINTAP procedure and FEA
- M. JEYAKUMAR, T. CHRISTOPHER
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering
- 33
- Rigorous back analysis of shear strength parameters of landslide slip
- Ke ZHANG, Ping CAO, Rui BAO
- 34
- Integrated interpretation of dual frequency induced polarization measurement based on wavelet analysis and metal factor methods
- Shi-li HAN, Shu-gen ZHANG, Jian-xin LIU, Hou-ji HU, Wen-shan ZHANG
- 35
- Relationship between Al(OH)3 solubility and particle size in synthetic Bayer liquors
- Xiao-bin LI, Li YAN, Dong-feng ZHAO, Qiu-sheng ZHOU, Gui-hua LIU, Zhi-hong PENG, Shuai-shuai YANG, Tian-gui QI
- 36
- Technological mineralogy and environmental activity of zinc leaching residue from zinc hydrometallurgical process
- Mi LI, Bing PENG, Li-yuan CHAI, Ning PENG, Xian-de XIE, Huan YAN
- 37
- Kinetics analysis of decomposition of vanadium slag by KOH sub-molten salt method
- Hui-bin LIU, Hao DU, Da-wei WANG, Shao-na WANG, Shi-li ZHENG, Yi ZHANG
- 38
- Mechanism of debismuthizing with calcium and magnesium
- Dian-kun LU, Zhe-nan JIN, Yong-feng CHANG, Shu-chen SUN
- 39
- Ge and Cu recovery from precipitating vitriol supernatant in zinc plant
- Zhao-an ZHOU, Guang CHU, Hong-xiang GAN, Tian-zu YANG, Lin CHEN
- 40
- Effect of mechanical activation on dissolution kinetics of neutral leach residue of zinc calcine in sulphuric acid
- Xuan-hai LI, Yan-juan ZHANG, Liu-ping PAN, Yan-song WEI
- 41
- Preparation of nanostructure silver powders by mechanical decomposing and mechanochemical reduction of silver oxide
- Gholam Reza KHAYATI, Kamal JANGHORBAN
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9