ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 23 No. 7 July 2013
Structural Materials
- 1
- Effect of Si-addition as a grain refiner on microstructure and properties of Ti-6Al-4V Alloy
- Khaled M. IBRAHIM, Abdel Hamied HUSSEIN, Mohamed ABDELKAWY
- 3
- Effect of minor Zr and Sc on microstructures and mechanical properties of Al-Mg-Si-Cu-Cr-V alloys
- Yi MENG, Zhi-hao ZHAO, Jian-zhong CUI
- 4
- Effect of nano TiN/Ti refiner on as-cast and hot-working microstructure of commercial purity aluminum
- Si-qi CAI, Yu-jie LI, Yuan CHEN, Xin-wei LI, Li-hong XUE
- 5
- Effect of heat treatment conditions on microstructure and wear behaviour of Al4Cu2Ni2Mg alloy
- Erdem KARAKULAK, Muzaffer ZEREN, Ridvan YAMANO？LU
- 6
- Microstructural and abrasive wear properties of SiC reinforced aluminum-based composite produced by compocasting
- Ali MAZAHERY, Mohsen Ostad SHABANI
- 7
- Effect of specific pressure on fabrication of 2D-Cf/Al composite by vacuum and pressure infiltration
- Yu-qin MA, Le-hua QI, Wu-qiang ZHENG, Ji-ming ZHOU, Lu-yan JU
- 8
- Creep age forming of 2124 aluminum alloy with single/double curvature
- Jin ZHANG, Yun-lai DENG, Si-yu LI, Ze-yu CHEN, Xin-ming ZHANG
- 9
- Effects of cooling rate on microstructure, mechanical and corrosion properties of Mg-Zn-Ca alloy
- Jing-feng WANG, Song HUANG, Sheng-feng GUO, Yi-yun WEI, Fu-sheng PAN
- 10
- Effect of Ce addition on microstructure of Mg-9Li alloy
- Heng-mei YIN, Bin JIANG, Xiao-yong HUANG, Ying ZENG, Qing-shan YANG, Ming-xing ZHANG, Fu-sheng PAN
- 11
- Temperature evolution and fatigue life evaluation of AZ31B magnesium alloy based on infrared thermography
- Zhi-feng YAN, Hong-xia ZHANG, Wen-xian WANG, Kai WANG, Fei-fei PEI
- 12
- Fatigue behavior of friction stir spot welded AZ31 Mg alloy sheet joints
- Tian-jiao LUO, Bao-liang SHI, Qi-qiang DUAN, Jun-wei FU, Yuan-sheng YANG
- 13
- Effects of welding parameters and tool geometry on properties of 3003-H18 aluminum alloy to mild steel friction stir weld
- M. DEHGHANI, S. A. A. AKBARI MOUSAVI, A. AMADEH
- 14
- Effect of intermetallic compounds on heat resistance of hot roll bonded titanium alloy-stainless steel transition joint
- Dong-sheng ZHAO, Jiu-chun YAN, Yu-jun LIU
- 15
- Causes and control of welding cracks in electron-beam-welded superalloy GH4169 joints
- Guo-qing CHEN,Bing-gang ZHANG, Tian-min Lü, Ji-cai FENG
- 16
- Sensitivity model for prediction of bead geometry in underwater wet flux cored arc welding
- Yong-hua SHI, Ze-pei ZHENG, Jin HUANG
Functional Materials
- 17
- Cutting performance of multilayer diamond coated silicon nitride inserts in machining aluminum-silicon alloy
- Nai-chao CHEN, Fang-hong SUN
- 18
- Wear and corrosion resistance and electroplating characteristics of electrodeposited Cr-SiC nano-composite coatings
- M. Arab JUNEGHANI, M. FARZAM, H. ZOHDIRAD
- 19
- Tribological behavior and mechanism of NiCrBSi-Y2O3 composite coatings
- Bin CAI, Ye-fa TAN, Hua TAN, Qi-feng JING, Zhong-wei ZHANG
- 20
- Preparation and oxidation behaviour of electrodeposited Ni-CeO2 nanocomposite coatings
- Hai-jun ZHANG, Yue-bo ZHOU, Jian-Feng SUN
- 21
- Equal channel angular extrusion of NiTi shape memory alloy tube
- Shu-yong JIANG, Ya-nan ZHAO, Yan-qiu ZHANG, Ming TANG, Chun-feng LI
- 22
- Phase transformation and damping behavior of lightweight porous TiNiCu alloys fabricated by powder metallurgy process
- Hong-jie JIANG, Chang-bo KE, Shan-shan CAO, Xiao MA, Xin-ping ZHANG
- 23
- Glass forming ability and mechanical properties of Nb-containing Cu-Zr-Al based bulk metallic glasses
- M. ABBASI, R. GHOLAMIPOUR, F. SHAHRI
- 24
- NiFe alloy particles doping effect of Gd-Ba-Cu-O bulks processed by a new cold-seeding technology
- Di-fan ZHOU, Kun XU, Shogo HARA, Bei-zhan LI, Mitsuru IZUMI
- 25
- Electrochemical hydriding performance of Mg-TM-Mm (TM=transition metals, Mm=mischmetal) alloys for hydrogen storage
- V. KNOTEK, D. VOJTěCH
- 26
- Effect of germanium on electrochemical performance of chain-like Co-P anode material for Ni/Co rechargeable batteries
- Jia-jia LI, Xiang-yu ZHAO, Wei DU, Meng YANG, Li-qun MA, Yi DING, Xiao-dong SHEN
- 27
- Effects of chromium doping on performance of LiNi0.5Mn1.5O4 cathode material
- Wei WANG, Heng LIU, Yan WANG, Chao GAO, Jun ZHANG
- 28
- Mechanical alloying and subsequent heat treatment of Ag-Zn powders
- Danny GUZMáN, Oscar RIVERA, Claudio AGUILAR, Stella ORDO？EZ, Carola MARTíNEZ, Daniel SERAFINI, Paula ROJAS
- 29
- Folate-conjugated Fe3O4 nanoparticles for in vivo tumor labeling
- Chun-jiao ZHOU, Shao-hua WANG, Yu ZHOU, Peng-fei RONG, Zi-zi CHEN, Jin-yan LIU, Jian-da ZHOU
- 30
- Manufacture, characterization and application of porous metal-fiber sintered felt used as mass-transfer-controlling medium for direct methanol fuel cells
- Wei YUAN, Yong TANG, Xiao-jun YANG, Bin LIU, Zhen-ping WAN
C/C Composites
- 31
- Anti-oxidation properties of ZrB2 modified silicon-based multilayer coating for carbon/carbon composites at high temperatures
- He-jun LI, Xi-yuan YAO, Yu-lei ZHANG, Dong-jia YAO, Shao-long WANG
- 32
- Formation mechanism and oxidation behavior of MoSi2-SiC protective coating prepared by chemical vapor infiltration/reaction
- Zi-bo HE, He-jun LI, Xiao-hong SHI, Qian-gang FU, Heng WU
- 33
- Double SiC coating on carbon/carbon composites against oxidation by a two-step method
- Can SUN, He-jun LI, Qian-gang FU, Jia-ping ZHANG, Han PENG
- 34
- SiC-MoSi2/ZrO2-MoSi2 coating to protect C/C composites against oxidation
- Qian-gang FU, Jia-ping ZHANG, Zheng-zhong ZHANG, He-jun LI, Can SUN
- 35
- C/SiC/MoSi2-SiC-Si multilayer coating for oxidation protection of carbon/carbon composites
- Yu-lei ZHANG, He-jun LI, Zhi-xiong HU, Ke-zhi LI, Lei-lei ZHANG
- 36
- Preparation and oxidation resistance of B2O3-coated boron-modified carbon foams
- Bin WANG, He-jun LI, Yu-lei ZHANG, Qian WANG
- 37
- Preparation and mechanical properties of carbon/carbon composites with high textured pyrolytic carbon matrix
- Wei LI, He-jun LI, Jie WANG, Shou-yang ZHANG, Xi YANG, Jian-feng WEI
- 38
- Effect of stress level on fatigue behavior of 2D C/C composites
- Xi YANG, He-jun LI, Kua-hai YU, Shou-yang ZHANG
- 39
- Fracture mechanism of 2D-C/C composites with pure smooth laminar pyrocarbon matrix under flexural loading
- Wei-feng CAO, He-jun LI, Ling-jun GUO, Shou-yang ZHANG, Ke-zhi LI, Hai-liang DENG
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering
- 40
- Surface energies and appearances of commonly exposed surfaces of scheelite crystal
- Zhi-yong GAO, Wei SUN, Yue-hua HU, Xiao-wen LIU
- 41
- Effects of Acidiphilium cryptum on biosolubilization of rock phosphate in the presence of Acidithiobacillus ferrooxidans
- Chun-qiao XIAO, Ru-an CHI, Yu-juan FANG
- 42
- Solubility of hemimorphite in ammonium sulfate solution at 25 °C
- Qin-xiang LI, Hui-ping HU, De-wen ZENG, Qi-yuan CHEN
- 43
- Separation and recovery of Cu and As from copper electrolyte through electrowinning and SO2 reduction
- Ya-jie ZHENG, Ying-lin PENG, Lang KE, Wen-mi CHEN
- 44
- Effect of MnO4- and silver content on electrochemical behaviour of Pb-Ag alloy anodes during potential decay periods
- Wei ZHANG, Chang-qing TU, Yi-feng CHEN, Houlachi GEORGEOS, Li XIAO
- 45
- Overlapped peaks resolution for linear sweep polarography using Gaussian-like distribution
- Hong-qiu ZHU, Guo-wei WANG, Chun-hua YANG, Yu CAO, Wei-hua GUI
- 46
- 3D finite element numerical simulation of advanced detection in roadway for DC focus method
- Xiao-kang DENG, Jian-xin LIU, Hai-fei LIU, Xiao-zhong TONG, Zhou LIU
- 47
- Modeling dam deformation using independent component regression method
- Wu-jiao DAI, Bin LIU, Xiao-li DING, Da-wei HUANG
- 48
- Optimization model of GNSS/pseudolites structure design for open-pit mine positioning
- Zheng-ying SHAN, Hou-zeng HAN, Kun JIANG
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9