ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 24 No. 2 February 2014
Structural Materials
- 1
- Fatigue crack initiation and early propagation behavior of 2A97 Al-Li alloy
- Jing ZHONG, Shen ZHONG, Zi-qiao ZHENG, Hai-feng ZHANG, Xian-fu LUO
- 2
- Microstructure of Mg-8Zn-4Al-1Ca aged alloy
- Yun DONG, Xiao-ping LIN, Jie YE, Run-guo ZHENG, Na HE
- 3
- Growth twinning behavior of cast Mg-Zn-Cu-Zr alloys
- Hong-mei ZHU,Cheng-ping LUO, Jiang-wen LIU,Dong-ling JIAO
- 4
- Effect of process parameters on microstructure and properties of AM50A magnesium alloy parts formed by double control forming
- Ju-fu JIANG, Ying WANG, Jian-jun QU
- 5
- Damping properties of as-cast Mg-xLi-1Al alloys with different phase composition
- Jing-feng WANG, Dan-dan XU, Ruo-peng LU, Fu-sheng PAN
- 6
- Effect of carbon addition on carbide morphology of single crystal Ni-based superalloy
- Zhu-huan YU, Lin LIU, Jun ZHANG
- 7
- Effect of NiAl content on phases and microstructures of TiC-TiB2-NiAl composites fabricated by reaction synthesis
- Hong-zhi CUI, Li MA, Li-li CAO, Fang-lei TENG, Ning CUI
- 8
- Superlubricity behaviors of Nitinol 60 alloy under oil lubrication
- Qun-feng ZENG, Guang-neng DONG
- 9
- Fretting wear behavior of Inconel 690 in hydrazine environments
- Xiao-yu ZHANG, Ping-di REN, Jin-fang PENG, Min-hao ZHU
- 10
- Texture of friction stir welded Ti-6Al-4V alloy
- Li ZHOU, Hui-jie LIU, Lin-zhi WU
- 11
- Experimental investigation and multi-objective optimization of wire electrical discharge machining (WEDM) of 5083 aluminum alloy
- G. SELVAKUMAR, G. SORNALATHA, S. SARKAR, S. MITRA
- 12
- Structural and mechanical properties of CuZr/AlN nanocomposites
- Man GU, Yu-cheng WU, Ming-hua JIAO, Xin-min HUANG
Functional Materials
- 13
- Casting effect on compressive brittleness of bulk metallic glass
- Hong WU, Yong LIU, Kai-yang LI, Zhong-wei ZHAO
- 14
- Preparation and characterization of Ce1-xDyx-ySryO2-δ system
- S. RAMESH, K. C. JAMES RAJU, C. VISHNUVARDHAN REDDY
- 15
- In situ formation of RE2S3 and RE2O2S phases on sinter skin of Cr–mischmetal co-doped WC-Co alloy
- Li Zhang, Yu-ping FENG, Shu Chen, Hou-ping Wu
- 16
- Structures and electrochemical hydrogen storage performance of Si added A2B7-type alloy electrodes
- Yang-huan ZHANG, Hui-ping REN, Ying CAI, Tai YANG, Guo-fang ZHANG, Dong-liang ZHAO
- 17
- Electrochemical behavior and cyclic fading mechanism of LiNi0.5Mn0.5O2 electrode in LiNO3 electrolyte
- Hai-yan WANG, Han-na HE, Nan ZHOU, Guan-hua JIN, You-gen TANG
- 18
- Influence of Al-Mn master alloys on microstructures and electrochemical properties of Mg-Al-Pb-Mn alloys
- Bin CHEN, Ri-chu WANG, Chao-qun PENG, Yan FENG, Nai-guang WANG
- 19
- Properties improvement and microstructure changes during thermomechanical treatment in sintered Cu-Au alloy
- Ivana MARKOVIC, Svetlana NESTOROVIC, Desimir MARKOVIC, Dragoslav GUSKOVIC
- 20
- A gradient nano/micro-structured surface layer on copper induced by severe plasticity roller burnishing
- Jing ZHAO, Wei XIA, Ning LI, Feng-lei LI
- 21
- Effects of slurry pack cementation temperature on microstructure and wear resistance of Ti-Al co-deposited coating on copper plated nickel layer
- Hong-xing WANG, Yan ZHANG, Shao-feng YANG, Bing-yi LIU
- 22
- Influence of heat-treatment on oxidation-resistance of phosphate-coating for C/C composite
- Yi-cheng GE, Ling-yun YANG, Shuai WU, Chan LI, Jian LUO, Mao-zhong YI
Computational Materials Science and Numerical Modelling
- 23
- Numerical analysis of coupled finite element with element-free Galerkin in sheet flexible-die forming
- Zhong-jin WANG, Bin-xian YUAN
- 24
- Establishment of size-dependant constitutive model of micro-sheet metal materials
- Xiao-juan LIN, Guang-chun WANG, Wei ZHENG, Hua JIANG, Jin LI
- 25
- Three-dimensional modeling of effect of surface intermetallic phase on surface defects of Al-Fe-Si aluminum foils during twin-roll casting
- Yuan-zhi ZHU, Qiang WAN, Bing-liang LI, Feng ZHOU, Ya-feng ZHANG
- 26
- Simulated and experimental investigation of stretch sheet forming of commercial AA1200 aluminum alloy
- Reza ESMAEILIZADEH, Kourosh KHALILI, Bagher MOHAMMADSADEGHI, Hossein ARABI
- 27
- Density functional theory study on natural hydrophobicity of sulfide surfaces
- Cui-hua ZHAO, Jian-hua CHEN, Bo-zeng WU, Xian-hao LONG
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering
- 28
- Thermal-hydro-mechanical coupling stress intensity factor of brittle rock
- Peng LI, Qiu-hua RAO, Zhuo LI, Jing JING
- 29
- Three-dimensional magnetotelluric regularized inversion based on smoothness-constrained model
- Xiao-zhong TONG, Jian-xin LIU, Rong-wen GUO, Hai-fei LIU, Lu GONG
- 30
- Monitoring large-area mining subsidence by GNSS based on IGS stations
- He-fang BIAN, Shu-bi ZHANG, Qiu-zhao ZHANG, Nan-shan ZHENG
- 31
- Collision and attachment behavior between fine cassiterite particles and H2 bubbles
- Liu-yi REN, Yi-min ZHANG, Wen-qing QIN, Shen-xu BAO, Jun WANG
- 32
- Loose-stratification model in separation process for vanadium pre-concentration from stone coal
- Yun-liang ZHAO, Yi-min ZHANG, Shen-xu BAO, Tao LIU, Ying BIAN, Mou-feng JIANG, Xiang LIU
- 33
- Leaching kinetics of selenium from selenium-tellurium-rich materials in sodium sulfite solutions
- Ya-jie ZHENG, Kun-kun CHEN
- 34
- Silver removal from molten lead through zinc powder injection
- V. H. GUTIéRREZ-PéREZ, A. CRUZ-RAMíREZ, M. VARGAS-RAMíREZ, E. PALACIOS-BEAS, R. G. SáNCHEZ-ALVARADO
- 35
- Valence states, impurities and electrocrystallization behaviors during molten salt electrorefining for preparation of high-purity titanium powder from sponge titanium
- Qi-gang WENG, Rui-di LI, Tie-chui YUAN, Jian LI, Yue-hui HE
- 36
- Magnesium vapor nucleation in phase transitions and condensation under vacuum conditions
- Cheng-bo YANG, Yang TIAN,Tao QU,Bin YANG, Bao-qiang XU, Yong-nian DAI
- 37
- Galvanic corrosion behavior of copper/titanium galvanic couple in artificial seawater
- Xiao-qing DU, Qing-song YANG, Yu CHEN, Yang YANG, Zhao ZHANG
- 38
- On-line detection of Cu (II) in bioleaching system by anodic stripping differential pulse voltammetry
- Yan JIN, Miao CHEN, Qing-hui JIN, Jian-long ZHAO
- 39
- Chemical fractionation method for characterization of biomass-based bottom and fly ash fractions from large-sized power plant of an integrated pulp and paper mill complex
- Risto P？YKI？, Hannu NURMESNIEMI, Olli DAHL, Mikko M？KEL？
- 40
- Applications of nonferrous metal price volatility to prediction of China’s stock market
- Die-feng PENG, Jian-xin WANG, Yu-lei RAO
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9