ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 24 No. 3 March 2014
Structural Materials
- 1
- Effects of Cu addition on microstructure and mechanical properties of as-cast magnesium alloy ZK60
- Hong-mei ZHU, Cheng-ping LUO, Jiang-wen LIU, Dong-ling JIAO
- 2
- Effect of heat treatment on microstructures and mechanical properties of sand-cast Mg-10Gd-3Y-0.5Zr magnesium alloy
- Liang CAO, Wen-cai LIU, Zhong-quan LI, Guo-hua WU, Lü XIAO, Shao-hua WANG, Wen-jiang DING
- 3
- Hot compression behavior and processing map of cast Mg-4Al-2Sn-Y-Nd alloy
- Jing WANG, Bao-liang SHI, Yuan-sheng YANG
- 4
- Creep mechanism and creep constitutive model of aluminum silicate short-fiber-reinforced magnesium matrix composite
- Jun TIAN, Zi-qiong SHI
- 5
- Strengthening contributions in ultra-high strength cryorolled Al-4%Cu-3%TiB2 in situ composite
- N. NAGA KRISHNA, K. SIVAPRASAD, P. SUSILA
- 6
- High-cycle fatigue behavior of friction stir butt welded 6061 aluminium alloy
- Hrishikesh DAS, Debayan CHAKRABORTY, Tapan KUMAR PAL
- 7
- Effect of welding sequence on residual stress in thin-walled octagonal pipe-plate structure
- Ding-fa FU, Chang-qing ZHOU, Can LI, Guan WANG, Luo-xing LI
- 8
- Effect of superheat and solidified layer on achieving good metallic bond between A390/A356 alloys fabricated by cast-decant-cast process
- M. MOHAMMADI RAHVARD, M. TAMIZIFAR, M. A. BOUTORABI, S. GHOLAMI SHIRI
- 9
- Anomalous yield and intermediate temperature brittleness behaviors of directionally solidified nickel-based superalloy
- Li-yuan SHENG, Fang YANG, Jian-ting GUO, Ting-fei XI
- 10
- Microstructure characterization and mechanical properties of TC4-DT titanium alloy after thermomechanical treatment
- Xiao-na PENG, Hong-zhen GUO, Zhi-feng SHI, Chun QIN, Zhang-long ZHAO
- 11
- Effect of wet shot peening on Ti-6Al-4V alloy treated by ceramic beads
- Guo-qing CHEN, Yan JIAO, Tang-yong TIAN, Xin-hua ZHANG, Zhi-qiang LI, Wen-long ZHOU
- 12
- Effect of heat treatment on microstructure and mechanical property of Ti-steel explosive-rolling clad plate
- Hai-tao JIANG, Xiao-qian YAN, Ji-xiong LIU, Xiao-ge DUAN
Functional Materials
- 13
- Effect of Ce,Co,B on formation of LaCo13-structure phase in La(Fe,Si)13 alloys
- Xiang CHEN, Yun-gui CHEN, Yong-bai TANG, Ding-quan XIAO
- 14
- Fe75Zr3Si13B9 magnetic materials prepared by spark plasma sintering
- Xing-hua WANG, Ge WANG, Yu-ying ZHU, Jin-feng BAO, Xiong-fei DU, Qiang LI
- 15
- Effects of alcohol additives on pore structure and morphology of freeze-cast ceramics
- Jing ZENG, Yan ZHANG, Ke-chao ZHOU, Dou ZHANG
- 16
- Effect of vinylene carbonate as electrolyte additive on cycling performance of LiFePO4/graphite cell at elevated temperature
- Hai-shen SONG, Zheng CAO, Zhi-an ZHANG, Yan-qing LAI, Jie LI, Ye-xiang LIU
- 17
- Crystallization kinetics and temperature dependence of energy storage properties of niobate glass-ceramics
- Tao-yong LIU, Guo-hua CHEN, Jun SONG, Chang-lai YUAN
- 18
- Effect of annealing treatment on morphologies and gas sensing properties of ZnO nanorods
- Jian-jiao ZHANG, Er-jun GUO, Li-ping WANG, Hong-yan YUE, Guo-jian CAO, Liang SONG
- 19
- Photocatalytic degradation and inactivation of Escherichia coli by ZnO/ZnAl2O4 with heteronanostructures
- Li ZHANG, Jian-hui YAN, Min-jie ZHOU, Yan-ping YU, Ye LIU, You-nian LIU
- 20
- Size control and its mechanism of SnAg nanoparticles
- Wei-peng ZHANG, Chang-dong ZOU, Bing-ge ZHAO, Qi-jie ZHAI, Yu-lai GAO
- 21
- Preparation and characterization of diamond film on Cu substrate using Cu-diamond composite interlayer
- Wan-qi QIU, Zhi-gang HU, Zhong-wu LIU, De-chang ZENG, Ke-song ZHOU
- 22
- Effect of electron beam irradiation on multi-walled carbon nanotubes
- Bin LI, Yi FENG, Ke-wang DING, Gang QIAN, Xue-bin ZHANG, Yan-fang LIU
- 23
- Effect of normalizing cooling process on microstructure and precipitates in low-temperature silicon steel
- Hui LI, Yun-li FENG, Meng SONG, Jing-long LIANG, Da-qiang CANG
Computational Materials Science and Numerical Modelling
- 24
- Isothermal section of Mg-Nd-Gd ternary system at 723 K
- Long XIAO, Yan ZHONG, Cui-ping CHEN, Ming-ming WULIU, Tian-kuang LUO, Li-bin LIU, Kui LIN
- 25
- Thermodynamic consistent phase field model for sintering process with multiphase powders
- Rui-jie ZHANG, Zhong-wei CHEN, Wei FANG, Xuan-hui QU
- 26
- New numerical algorithm of gas-liquid two-phase flow considering characteristics of liquid metal during mold filling
- Xiao-feng NIU, Zhao FANG, Wei LIANG, Hua HOU, Hong-xia WANG
- 27
- High-temperature flow behavior modeling of 2099 alloy considering strain effects
- Fei ZHANG, Jian SHEN, Xiao-dong YAN, Jian-lin SUN, Xiao-long SUN, Yin YANG, Yong LIU
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering
- 28
- Fracture evolution around pre-existing cylindrical cavities in brittle rocks under uniaxial compression
- Xing-dong ZHAO, Hong-xun ZHANG, Wan-cheng ZHU
- 29
- Development of multi-channel observation and inversion for IP electrical sounding method
- Hai-fei LIU, Jian-xin LIU, Rong-wen GUO, Xiao-zhong TONG, Lu GONG, Yan-hua PENG
- 30
- Generalized functional model of maximum and minimum detectable deformation gradient for PALSAR interferometry
- Qi-jie WANG, Zhi-wei LI, Ya-nan DU, Rong-an XIE, Xin-qing ZHANG, Mi JIANG, Jian-jun ZHU
- 31
- 3D characterization and analysis of pore structure of packed ore particle beds based on computed tomography images
- Bao-hua YANG, Ai-xiang WU, Xiu-xiu MIAO, Jin-zhi LIU
- 32
- Kinetics of extracting magnesium from mixture of calcined magnesite and calcined dolomite by vacuum aluminothermic reduction
- Da-xue FU, Nai-xiang FENG, Yao-wu WANG, Jian-ping PENG, Yue-zhong DI
- 33
- Reaction kinetics of roasting high-titanium slag with concentrated sulfuric acid
- Li-li SUI, Yu-chun ZHAI
- 34
- Preparation of Na specific absorbent and application of sodium removal from ammonium tungstate solution
- Zhong-wei ZHAO, Mao-feng YANG, Li-hua HE, Jia-liang ZHANG, Xing-yu CHEN, Xu-heng LIU
- 35
- Reductive leaching of manganese oxide ores using waste tea as reductant in sulfuric acid solution
- Qing TANG, Hong ZHONG, Shuai WANG, Jin-zhong LI, Guang-yi LIU
- 36
- Kinetics and equilibrium adsorption of copper(II) and nickel(II) ions from aqueous solution using sawdust xanthate modified with ethanediamine
- Lu XIA, Yi-xu HU, Bo-han ZHANG
- 37
- Electrochemical reduction process of Co(II) in citrate solution
- Yan LIU, Zhe-jun LI, Yi-cheng WANG, Wei WANG
- 38
- Morphological and crystallographic characteristics of lead powder obtained by electrodeposition from an environmentally friendly electrolyte
- Neboj?a D. NIKOLI?, Djendji Dj. VA?TAG, Vesna M. MAKSIMOVI?, Goran BRANKOVI?
- 39
- Anodic behavior and microstructure of Al/Pb-Ag anode during zinc electrowinning
- Yong-chun ZHANG, Bu-ming CHEN, Hai-tao YANG, Zhong-cheng GUO, Rui-dong XU
- 40
- Solid-phase sintering process and forced convective heat transfer performance of porous-structured micro-channels
- Peng-fei BAI, Zi-chuan YI, Biao TANG, Guo-fu ZHOU
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9