ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 24 No. 10 October 2014
Review
- 1
- Development of advanced electron tomography in materials science based on TEM and STEM
- Mao-hua LI, Yan-qing YANG, Bin HUANG, Xian LUO, Wei ZHANG, Ming HAN, Ji-gang RU
Structural Materials
- 2
- Vacuum assisted high-pressure die casting of AZ91D magnesium alloy at different slow shot speeds
- Qing-liang WANG, Shou-mei XIONG
- 3
- Microstructural evolution and delayed hydride cracking of FSW-AZ31 magnesium alloy during SSRT
- Rong-chang ZENG, Wolfgang DIETZEL, Rudolf ZETTLER, Wei-min GAN, Xin-xin SUN
- 4
- Microstructures and mechanical properties of extruded and aged Mg-Zn-Mn-Sn-Y alloys
- Guang-shan HU, Ding-fei ZHANG, Ding-zang ZHAO, Xia SHEN, Lu-yao JIANG, Fu-sheng PAN
- 5
- Precipitation kinetics of 2519A aluminum alloy based on aging curves and DSC analysis
- Yi-ping WU, Ling-ying YE, Yu-zhen JIA, Ling LIU, Xin-ming ZHANG
- 6
- Influence of dent on residual ultimate strength of 2024-T3 aluminum alloy plate under axial compression
- Zhi-gang LI, Ming-yi ZHANG, Fu LIU, Chun-sheng MA, Jin-huan ZHANG, Zhong-min HU, Jia-zhen ZHANG, Ya-nan ZHAO
- 7
- Microstructure instability of fully lamellar TiAl alloy containing high content of Nb after long-term thermal cycling
- Lu FANG, Xian-fei DING, Jian-ping HE, Lai-qi ZHANG, Zhi LIN, Jun-pin LIN
- 8
- Deformed microstructure and texture of Ti6Al4V alloy
- Liu-qing YANG, Yan-qing YANG
- 9
- Influence of laser peening on microstructure and fatigue lives of Ti-6Al-4V
- S. ANAND KUMAR, R. SUNDAR, S. GANESH SUNDARA RAMAN, H. KUMAR, R. KAUL, K. RANGANATHAN, S. M. OAK, L. M. KUKREJA, K. S. BINDRA
- 10
- Interfacial reactions between Ti-1100 alloy and CaO crucible during casting process
- Bin-guo FU, Hong-wei WANG, Chun-ming ZOU, Pan MA, Zun-jie WEI
- 11
- Microstructure and mechanical properties of friction welds between TiAl alloy and 40Cr steel rods
- Hong-gang DONG, Lian-zhen YU, Hong-ming GAO, De-wei DENG, Wen-long ZHOU, Chuang DONG
- 12
- Flexural destructive process of unidirectional carbon/carbon composites reinforced with in situ grown carbon nanofibers
- Xue-feng LU, Peng XIAO, Xian-feng XU, Jie CHEN
Functional Materials
- 13
- Microstructure and magnetic properties of anisotropic Nd-Fe-B magnets prepared by spark plasma sintering and hot deformation
- Xiao-qiang LI, Li LI, Ke HU, Zhi-cheng CHEN, Sheng-guan QU, Chao YANG
- 14
- Magnetocaloric effect in Ni-Mn-In-Co microwires prepared by Taylor-Ulitovsky method
- Xue-xi ZHANG, Sheng-pei MIAO, Jian-fei SUN
- 15
- Giant magnetoresistance in Fe/SiO2/p-Si hybrid structure under non-equilibrium conditions
- N. V. VOLKOV, A. S. TARASOV, A. O. GUSTAJCEV, O. N. VOLKOVA, S. N. VARNAKOV, S. G. OVCHINNIKOV
- 16
- Effect of Zr and Sc on mechanical properties and electrical conductivities of Al wires
- Run-ze CHAO, Xi-hua GUAN , Ren-guo GUAN, Di TIE, Chao LIAN, Xiang WANG, Jian ZHANG
- 17
- In-situ formation characteristic, tribological characterization and anti-corrosion properties of quaternary composites films
- Ojo Sunday Isaac FAYOMI, Abimbola Patricia Idowu POPOOLA
- 18
- Effect of deposition parameters on micro- and nano-crystalline diamond films growth on WC-Co substrates by HFCVD
- Jian-guo ZHANG, Xin-chang WANG, Bin SHEN, Fang-hong SUN
- 19
- Electrodeposition mechanism of Ni-Al composite coating
- Mohsen ADABI, Ahmad Ali AMADEH
- 20
- Influence of recovery heating rate on shape memory effect in up-quenched Cu-Al-Mn alloy
- Shan-ling WANG, Qin YANG, Xiao-lan LI, Hua-bei PENG, Yu-hua WEN
- 21
- Wire electric discharge machining characteristics of titanium nickel shape memory alloy
- M. MANJAIAH, S. NARENDRANATH, S. BASAVARAJAPPA, V. N. GAITONDE
- 22
- Properties and microstructure of Cu/diamond composites prepared by spark plasma sintering method
- Jing-mei TAO, Xin-kun ZHU, Wei-wei TIAN, Peng YANG, Hao YANG
- 23
- Effects of Fe content on photocatalytic activity of CaTiO3-Fex
- Chong HAN, He YANG, Xiang-xin XUE
Computational Materials Science and Numerical Modelling
- 24
- New atom movement mechanism for tracking path on disordering AuCuI (A8AuA4Cu ) compound
- You-qing XIE, Hong-jian PENG, Xin-bi LIU, Xiao-bo LI, Yao-zhuang NIE
- 25
- Warm bending mechanism of extrados and intrados of large diameter thin-walled CP-Ti tubes
- Xiao-li ZHANG, He YANG, Heng LI, Zhi-yong ZHANG, Long LI
- 26
- Accuracy analysis of plane-strain bulge test for determining mechanical properties of thin films
- Lin YANG, Shi-guo LONG, Zeng-sheng MA, Zi-han WANG
- 27
- Effects of die geometry on non-equal channel lateral extrusion (NECLE) of AZ80 magnesium alloy
- Faramarz FERESHTEH-SANIEE, Mohammad ASGARI, Mahmoud BARATI, Sayed Mahmoud PEZESHKI
- 28
- Upper bound analysis for hybrid sheet metals extrusion process through curved dies
- H. HAGHIGHAT, H. SHAYESTEH
- 29
- Numerical studies of effect of tool sizes and pin shapes on friction stir welding of AA2024-T3 alloy
- Zhao ZHANG, Qi WU, Hong-wu ZHANG
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering
- 30
- Subsidence prediction method based on equivalent mining height theory for solid backfilling mining
- Guang-li GUO, Xiao-jun ZHU, Jian-feng ZHA, Qiang WANG
- 31
- Evaluation of PS-DInSAR technology for subsidence monitoring caused by repeated mining in mountainous area
- Zhen-guo LIU, Zheng-fu BIAN, Shao-gang LEI, Dong-lie LIU, Andrew SOWTER
- 32
- Mechanical properties of anti-seepage grouting materials for heavy metal contaminated soil
- Yu-you YANG, Jian-qiang WANG, Hai-jun DOU
- 33
- Fractional distribution and risk assessment of heavy metal contaminated soil in vicinity of a lead/zinc mine
- Shun-hong HUANG
- 34
- Archaeal and bacterial communities in acid mine drainage from metal-rich abandoned tailing ponds, Tongling, China
- Yang YANG, Yang LI, Qing-ye SUN
- 35
- Influence of sodium 2,3-dihydroxypropyl dithiocarbonate on floatability of chalcopyrite and galena
- Zheng-jie PIAO, De-zhou WEI, Zhi-lin LIU
- 36
- Influence of thermal history on conversion of aluminate species in sodium aluminate solution
- Xiao-bin LI, Dong-feng ZHAO, Shuai-shuai YANG, Dan-qin WANG, Qiu-sheng ZHOU, Gui-hua LIU
- 37
- Crystallization behaviors of bayerite from sodium chromate alkali solutions
- Guang-yeWEI, Jing-kui QU, Yu-dong ZHENG,Tao QI, Qiang GUO, Bing-bing HAN, Hong-xin ZHAO
- 38
- Thermodynamics on formation of C, Al4C3 and Al2O3 in AlCl disproportionation process in vacuum to produce aluminum
- Yue-bin FENG, Bin YANG, Yong-nian DAI
- 39
- Solid-state reduction kinetics and mechanism of pre-oxidized vanadium-titanium magnetite concentrate
- Shui-shi LIU, Yu-feng GUO, Guan-zhou QIU, Tao JIANG, feng CHEN
- 40
- Non-isothermal kinetic analysis of thermal dehydration of La2(CO3)3·3.4H2O in air
- Xiang-hui Zhang, Chuan He, Ling Wang, Jing Liu, Miao Deng, Qian Feng
- 41
- Kinetics and mechanism of adsorptive removal of copper from aqueous solution with poly(vinyl alcohol) hydrogel
- Tongsai JAMNONGKAN, Krittiya KANTAROT, Kitiya NIEMTANG, P. Pungboon PANSILA, Amnuay WATTANAKORNSIRI
- 42
- Effects of current density on preparation and performance of Al/conductive coating/α-PbO2-CeO2-TiO2/β-PbO2-MnO2-WC-ZrO2 composite electrode materials
- Hai-tao YANG, Bu-ming CHEN, Zhong-cheng GUO, Huan-rong LIU, Yong-chun ZHANG, Hui HUANG, Rui-dong XU, Ren-chun FU
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9