Vol. 25/No. 1/January 2015 - TNMSC

ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 25 No. 1 January 2015

Structural Materials

1: Influence of temperature and strain rate on flow stress behavior of twin-roll cast, rolled and heat-treated AZ31 magnesium alloys; F. BERGE, L. KRüGER, H. OUAZIZ, C. ULLRICH

2: Microstructure and texture evolution of AZ31 magnesium alloy during large strain hot rolling; Fei GUO, Ding-fei ZHANG, Xu-sheng YANG, Lu-yao JIANG, Fu-shengPAN

3: Microstructures and mechanical properties of Mg-Al-Sm series heat-resistant magnesium alloys; Zheng-hua HUANG, Wen-jun QI, Jing XU, Chang CAI

4: Microstructure and properties of plasma remelted AZ91D magnesium alloy; Hong-zhi CUI, Zhao-tao MENG, Cheng-zhu XIAO, Jin-quan SUN, Cui-xiang WANG

5: Microstructural development and its effects on mechanical properties of Al/Cu laminated composite; Xiao-bing LI, Guo-yin ZU, Ping WANG

6: Effect of iron addition on microstructure, mechanical and magnetic properties of Al-matrix composite produced by powder metallurgy route; A. FATHY, Omyma EL-KADY, Moustafa M. M. MOHAMMED

7: Distribution and engulfment behavior of TiB₂ particles or clusters in wedge-shaped copper casting ingot; Jing SUN, Xiao-bo ZHANG, Qing CAI, Yi-jie ZHANG, Nai-heng MA, Hao-wei WANG

8: Influence of plate length and plate cooling rate on solidification and microstructure of A356 alloy produced by oblique plate; N. K. KUND

9: Microstructure and mechanical properties of TC21 titanium alloy by near-isothermal forging; Zhi-feng SHI, Hong-zhen GUO, Rui LIU, Xiao-chen WANG, Ze-kun YAO

10: Bonding interface characteristic and shear strength of diffusion bonded Ti-17 titanium alloy; Hong LI, Chao ZHANG, Hong-bin LIU, Miao-quan LI

11: Hot deformation and processing map of GH3535 superalloy; Ya-qi JI, Shun-de QU, Wei-xin HAN

12: Influence of tool rotational speed on microstructure and sliding wear behavior of Cu/B₄C surface composite synthesized by friction stir processing; R. SATHISKUMAR, I. DINAHARAN, N. MURUGAN, S. J. VIJAY

13: Microstructure, mechanical properties and wear behaviour of Zn-Al-Cu-TiB₂in situ composites; Fei CHEN, Tong-min WANG, Zong-ning CHEN, Feng MAO, Qiang HAN, Zhi-qiang CAO

Functional Materials

14: Research progress of Ag₃PO₄-based photocatalyst: Fundamentals and performance enhancement; Yun-zhu MA, Fan CHENG, Wen-sheng LIU, Juan WANG, Yi-kai WANG

15: Magnetostriction and microstructure of melt-spun Fe₇₇Ga₂₃ribbons prepared with different wheel velocities; Hao LIU, Hai-ou WANG, Meng-xiong CAO, Wei-shi TAN, Yang-guang SHI, Feng XU, Quan-jie JIA , Yu-ying HUANG

16: Solution combustion synthesis of Ni-Y₂O₃ nanocomposite powder; Ye LIU, Ming-li QIN, Lin ZHANG, Bao-rui JIA, Zhi-qin CAO, De-zhi ZHANG, Xuan-hui QU

17: Effects of Fe₂O₃content on microstructure and mechanical properties of CaO-Al₂O₃-SiO₂ system; Xiang-zhong REN, Wei ZHANG, Yong ZHANG, Pei-xin ZHANG, Jian-hong LIU

18: Fabrication and characterization of electrodeposited nanocrystalline Ni-Fe alloys for NiFe₂O₄ spinel coatings; Li MA, Long ZHANG, Xiao-bing LI, Zhi-you LI, Ke-chao ZHOU

19: Thermal conductivity of carbon nanotube-silver composite; Hemant PAL, Vimal SHARMA

20: Compressive behavior of Zn-22Al closed-cell foams under uniaxial quasi-static loading; A. Heydari ASTARAIE, H. R. SHAHVERDI, S. H. ELAHI

21: Microstructure and thermophysical properties of SiC/Al composites mixed with diamond; Hong GUO, Yuan-yuan HAN, Xi-min ZHANG, Cheng-chang JIA, Jun XU

22: Effect of TiO₂ content on properties of Al₂O₃ thermal barrier coatings by plasma spraying; Sheng-kai JIA, Yong ZOU, Ji-yuan XU, Jing WANG, Lei YU

23: High temperature oxidation resistance and microstructure change of aluminized coating on copper substrate; Hong-xing WANG, Yan ZHANG, Jia-lin CHENG, Yu-shan LI

24: Oxidation and hot corrosion of electrodeposited Ni-7Cr-4Al nanocomposite; Hai-jun ZHANG, Jian-feng SUN

25: Properties of Zn-Bi composite coatings prepared by ionic co-discharge deposition; See Leng TAY, Wei-wei CHEN, Xiao-jin WEI, Cai-zhen YAO, Wei GAO

26: Effect of linear carboxylic ester on low temperature performance of LiMn₂O₄-graphite cells; Shu HONG, Jie LI, Guan-chao WANG, Zhi-an ZHANG, Yan-qing LAI

Computational Materials Science and Numerical Modelling

27: Alloy gene Gibbs energy partition function and equilibrium holographic network phase diagrams of Au₃Cu-type sublattice system; Youq-qing XIE, Yao-zhuang NIE, Xiao-bo LI, Hong-jian PENG, Xin-bi LIU

28: Phase-field modeling of dendritic growth under forced flow based on adaptive finite element method; Chang-sheng ZHU, Peng LEI, Rong-zhen XIAO, Li FENG

29: Crystal anisotropy of AZ31 magnesium alloy under uniaxial tension and compression; Yong-ting LAN, Xian-ciZHONG, Gao-fengQUAN, Ruo-cheng LIN, Ke-shi ZHANG

30: Finite element analysis of stress distribution and burst failure of SiC_f/Ti-6Al-4V composite ring; Hong-yuan ZHANG, Yan-qing YANG, Xian LUO

31: Non-contact measurement and multi-objective analysis of drilling temperature when drilling B₄C reinforced aluminum composites; A. TASKESEN, K. KUTUKDE

Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering

32: Geochemistry of intrusive rock in Dachang tin-polymetallic ore field, Guangxi, China: Implications for petrogenesis and geodynamics; Yong-sheng CHENG

33: Three-dimensional analytical solution of acoustic emission source location for cuboid monitoring network without pre-measured wave velocity; Long-jun DONG, Xi-bing LI, Zi-long ZHOU, Guang-hui CHEN, Ju MA

34: Comparison of electrochemical dissolution of chalcopyrite and bornite in acid culture medium; Hong-bo ZHAO, Ming-hao HU, Yi-ni LI, Shan ZHU, Wen-qing QIN, Guan-zhou QIU, Jun WANG

35: Flotation of carbonaceous copper shale-quartz mixture with poly(ethylene glycol) alkyl ethers; Przemyslaw B. KOWALCZUK, Emilia ZALESKA, Oliver DANCZAK

36: Mechanism analysis of ions interaction in MgCl₂/LiCl solution and effect of lithium on ammonia precipitation products; Jin TAN, Zheng-ping WU, Yuan-bing SUN, Jin-ling ZHANG, Zhou-lan YIN, Qi-yuan CHEN

37: Solvent extraction of rubidium and cesium from salt lake brine with t-BAMBP-kerosene solution; Shi-ming LIU, He-hui LIU, Yun-jing HUANG, Wei-jun YANG

38: Effect of gas bubble on cell voltage oscillations based on equivalent circuit simulation in aluminum electrolysis cell; Yong-liang WANG, Jun TIE, Gan-feng TU, Shu-chen SUN, Ren-tao ZHAO, Zhi-fang ZHANG

39: Electrochemical characterization of Ti12Mo5Ta alloys in contact with saline medium; Daniel MARECI, Romeu CHELARIU, Adrian CAILEAN, Florin BRINZA, Georgiana BOLAT, Doina Margareta GORDIN

40: Oxidation behavior of Hastelloy C-2000 superalloy at 800 °C and 1000 °C; Liang YUAN, Rui HU, Tie-bang ZHANG, Jin-shan LI, Xiao-qing ZHANG

Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9