ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 25 No. 3 March 2015
Structural Materials
- 2
- Production and characterization of rich husk ash particulate reinforced AA6061 aluminum alloy composites by compocasting
- J. ALLWYN KINGSLY GLADSTON, N. MOHAMED SHERIFF, I. DINAHARAN, J. DAVID RAJA SELVAM
- 3
- Flow stress behavior and processing map of extruded 7075Al/SiC particle reinforced composite prepared by spray deposition during hot compression
- Hong-dan WU, Hui ZHANG, Shuang CHEN, Ding-fa FU
- 4
- Effects of processing parameters on microstructure and mechanical properties of powder-thixoforged 6061 aluminum alloy
- Yu-shi CHEN, Ti-jun CHEN,Su-qing ZHANG, Pu-bo LI
- 5
- Influence of I-phase and W-phase on microstructure and mechanical properties of Mg-8Li-3Zn alloy
- Guo-bing WEI, Xiao-dong PENG, Bao ZHANG, Amir HADADZADEH, Tian-cai XU, Wei-dongXIE
- 6
- As-cast microstructures and mechanical properties of Mg-4Zn-xY-1Ca (x=1.0, 1.5, 2.0, 3.0) magnesium alloys
- Ming-bo YANG, De-yong WU, Meng-dan HOU, Fu-sheng PAN
- 7
- Effects of grain size on shift of neutral layer of AZ31 magnesium alloy under warm condition
- Guang-sheng HUANG, Yan-xia WANG, Li-fei WANG, Ting-zhuang HAN, Fu-sheng PAN
- 8
- Deformation and fracture behavior of commercially pure titanium with gradient nano-to-micron-grained surface layer
- Yan-fei YIN, Wei XU, Qiao-yan SUN, Lin XIAO, Jun SUN
- 9
- Flow behavior modeling of IMI834 titanium alloy during hot tensile deformation
- M. H. GHAVAM, M. MORAKABATI, S. M. ABBASI, H. BADRI
- 10
- Effect of thermo-mechanical processing on microstructure and electrochemical behavior of Ti-Nb-Zr-V new metastable β titanium biomedical alloy
- Mohsin Talib MOHAMMED, Zahid A. KHAN, M. GEETHA
- 11
- Transient liquid phase bonding of Al 2024 to Ti-6Al-4V alloy using Cu-Zn interlayer
- Majid SAMAVATIAN, Ayoub HALVAEE, Ahmad Ali AMADEH, Alireza KHODABANDEH
- 12
- Effects of Cr content on microstructure and mechanical properties of single crystal superalloy
- Zhen-xue SHI, Shi-zhong LIU, Xiao-guang WANG, Jia-rong LI
- 13
- Oxidation behavior of Zr-containing Ti2AlNb-based alloy at 800 °C
- Wei DANG, Jin-shan LI, Tie-bang ZHANG, Hong-chao KOU
Functional Materials
- 14
- Effects of deposition parameters on HFCVD diamond films growth on inner hole surfaces of WC-Co substrates
- Xin-chang WANG, Zi-chao LIN, Bin SHEN, Fang-hong SUN
- 15
- Microstructure and high temperature oxidation resistance of Si-Y co-deposition coatings prepared on TiAl alloy by pack cementation process
- Yong-quan LI, Fa-qin XIE, Xiang-qing WU
- 16
- Microstructure and indentation toughness of Cr/CrN multilayer coatings by arc ion plating
- Gui-hong SONG, Zhuo LUO, Feng LI, Li-jia CHEN, Chun-lin HE
- 17
- Microstructure, mechanical and oxidation characteristics of detonation gun and HVOF sprayed MCrAlYX coatings
- Jun-guo GAO, Zhi-hui TANG, Chang-liang WANG, Meng-qiu GUO, Yong-jing CUI
- 18
- Effects of chitosan coating on biocompatibility of Mg-6%Zn-10%Ca3(PO4)2 implant
- Jun ZHAO, Liang-jianCHEN, Kun YU, Chang CHEN, Yi-longDAI, Xue-yan QIAO, Yang YAN, Zhi-ming YU
- 19
- Electroplating mechanism of nanocrystalline NdFeB film
- Zhong-nian YANG, Cui WANG, Yan ZHANG, Yan XIE
- 20
- DSC analysis of commercial Cu-Cr-Zr alloy processed by equal channel angular pressing
- K. ABIB, F. HADJ LARBI, L. RABAHI, B. ALILI, D. BRADAI
- 21
- Effect of casting vacuum on thermodynamic and corrosion properties of Fe-based glassy alloy
- Yi-min SUN, Yong-gang WANG, Ji-teng ZHANG, Rui LI, Ling-yu GUO, Hui XU, Wei-min WANG
- 22
- Effects of Co and Al addition on martensitic transformation and microstructure in ZrCu-based shape memory alloys
- Wei-hong GAO, Xiang-long MENG, Wei CAI, Lian-cheng ZHAO
- 23
- Wear behavior of SiC/PyC composite materials prepared by electromagnetic-field-assisted CVI
- Chuan-jun TU, Qi-zhong HUANG, Xian-zhi XIONG, Zhi-yong XIE, Li-hui CAI, Shan CHEN
- 24
- Preparation of in-situ Cu/NbC nanocomposite and its functionally graded behavior for electrical contact applications
- S. GHOLAMI SHIRI, P. ABACHI, K. POURAZARANG, M. MOHAMMADI RAHVARD
- 25
- Microstructure and formation process of Ni-pool defect in WC-8Ni cemented carbides
- Kai-hua SHI, Ke-chao ZHOU, Zhi-you LI, Dou ZHANG, Xiu-qi ZAN
- 26
- Effects of Sn element on microstructure and properties of Zn-Cu-Bi-Sn high-temperature solder
- Fei XING, Xiao-ming QIU, Yang-dong LI
Computational Materials Science and Numerical Modelling
- 27
- Holographic alloy positioning design system and holographic network phase diagrams of Au-Cu system
- You-qing XIE, Xin-bi LIU, Xiao-bo LI, Hong-jian PENG,Yao-zhuang NIE
- 28
- Modified embedded-atom interatomic potential for Co-W and Al-W systems
- Wei-ping DONG, Zheng CHEN, Byeong-Joo LEE
- 29
- First-principles calculations of structural, electronic, elastic and thermal properties of phase M2SiC (M=Ti, V, Cr, Zr, Nb, Mo, Hf, Ta and W)
- B. GHEBOULI, M. A. GHEBOULI, M. FATMI, L. LOUAIL, T. CHIHI, A. BOUHEMADOU
- 30
- 3D FEM simulation of flow velocity field for 5052 aluminum alloy multi-row sprocket in cold semi-precision forging process
- Wang-jun CHENG, Cheng-zhong CHI, Yong-zhen WANG, Peng LIN, Ri-hong ZHAO, Wei LIANG
- 31
- Effects of static magnetic fields on melt flow in detached solidification
- Lan PENG, Huan GONG
- 32
- Application of novel physical picture based on artificial neural networks to predict microstructure evolution of Al-Zn-Mg-Cu alloy during solid solution process
- Jiao-jiao LIU, Hong-ying LI, De-wangLI, Yue WU
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering
- 33
- Damage failure of cemented backfill and its reasonable match with rock mass
- Zhi-xiang LIU, Ming LAN, Si-you XIAO, Hu-qiang GUO
- 34
- Plotting and application of predominance area diagram of In-S-O system based on topological rules
- Fu-chun XIE, Zhou-lan YIN, Jun TAN, Chang-qing LIU, Ping-min ZHANG
- 35
- Preparation of potassium chromate by roasting of carbon ferrochrome
- Guo-rong HU, Jia-liang WANG, Zhong-dong PENG, Ke DU, Wei-gang WANG, Qing-lai JIANG
- 36
- Response surface optimization of process parameters for removal of F and Cl from zinc oxide fume by microwave roasting
- Zhi-qiang LI, Jing LI, Li-bo ZHANG, Jin-hui PENG, Shi-xing WANG, Ai-yuan MA, Bao-bao WANG
- 37
- Synthesis of platy potassium magnesium titanate and its application in removal of copper ions from aqueous solution
- Yan-ni TAN, Ni SONG, Yong LIU, Tao LUO, Yu-hai DOU, Qing ZHANG, Qian-nan LIU, Lan-lan LUO
- 38
- Adsorption of Cu2+ from aqueous solution by modified biomass material
- Ying-bo DONG, Hai LIN
- 39
- Numerical simulation of fluid dynamics in rare earth chloride solution in jet-flow pyrolysis reactor
- Chao Lü, Qiu-yue ZHAO, Zi-mu ZHANG, Zhi-he DOU, Ting-an ZHANG, Hong-liang ZHAO
- 40
- Effect of melt superheat on structural uniformity of lotus-type porous metals prepared by unidirectional solidification
- Yuan LIU, Hua-wei ZHANG, Yan-xiang LI
- 41
- Interaction between AE44 magnesium alloy and SiC-Al2O3-SiO2 ceramic foam
- Matej STEINACHER, Primo？ MRVAR, Franc ZUPANI？
- 42
- Price linkage between Chinese and international nonferrous metals commodity markets based on VAR-DCC-GARCH models
- Yi-ding YUE, Du-chi LIU, Shan XU
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9