ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 25 No. 7 July 2015
Structural Materials
- 1
- Microstructure and mechanical properties of Mg, Ag and Zn multi-microalloyed Al-(3.2-3.8)Cu-(1.0-1.4)Li alloys
- Jin-feng LI, Ping-li LIU, Yong-lai CHEN, Xu-hu ZHANG, Zi-qiao ZHENG
- 2
- Effect of ball milling on microstructural evolution during partial remelting of 6061 aluminum alloy prepared by cold-pressing of alloy powders
- Yu-shi CHEN, Ti-jun CHEN,Su-qing ZHANG, Pu-bo LI
- 3
- Influence of twist extrusion process on consolidation of pure aluminum powder in tubes by equal channel angular pressing and torsion
- Xiao-xi WANG, Min HE, Zhen ZHU, Ke-min XUE, Ping LI
- 4
- Microstructure and mechanical properties of Al-6Zn-2.5Mg-1.8Cu alloy prepared by squeeze casting and solid hot extrusion
- Hong-ze FANG, Run-xia LI, Rui-run CHEN, Bao-yi YU, Ying-dong QU, Shi-wen XUN, Rong-de LI
- 5
- Microstructure characterization and mechanical properties of gas tungsten arc welded cast A356 alloy
- S. TAKHTI, M. REIHANIAN, A. ASHRAFI
- 6
- Effects of heat input in friction stir welding on microstructure and mechanical properties of AA3003-H18 plates
- B. ABNAR, M. KAZEMINEZHAD, A. H. KOKABI
- 8
- As-cast structure and tensile properties of AZ80 magnesium alloy DC cast with low-voltage pulsed magnetic field
- Tian-jiao LUO, Huan-ming JI, Jie CUI, Fu-ze ZHAO, Xiao-hui FENG, Ying-ju LI, Yuan-sheng YANG
- 9
- Microstructures, corrosion and mechanical properties of as-cast Mg-Zn-Y-(Gd) alloys
- Fei SHI, Chun-qing WANG, Zhong-ming ZHANG
- 10
- Effects of processing parameters on microstructure of semi-solid slurry of AZ91D magnesium alloy prepared by gas bubbling
- Yang ZHANG, Guo-hua WU, Wen-cai LIU, Liang ZHANG, Song PANG, Wen-jiang DING
- 11
- Deformation mechanisms of Mg-3Al-1Zn alloy by polycrystal plasticity modeling
- De-liang YIN, Jin-qiang LIU, Bing WU
- 12
- Hot deformation behavior of TC11/Ti-22Al-25Nb dual-alloy in isothermal compression
- Chun QIN, Ze-kun YAO, Yong-quan NING, Zhi-feng SHI, Hong-zhen GUO
- 13
- Microstructural characterization of in situ synthesized TiB in cast Ti-1100-0.10B alloy
- Bin-guo FU, Hong-wei WANG, Chun-ming ZOU, Zun-jie WEI
- 14
- Effect of Nb addition on microstructure, mechanical properties and castability of β-type Ti-Mo alloys
- Ling-bo ZHANG, Ke-zheng WANG, Li-juan XU, Shu-long XIAO, Yu-yong CHEN
- 15
- Mechanical properties and microstructural evolution of ultrafine grained zircaloy-4 processed through multiaxial forging at cryogenic temperature
- D. FULORIA, S. GOEL, R. JAYAGANTHAN, D. SRIVASTAVA, G. K. DEY, N. SAIBABA
Functional Materials
- 16
- Sintering preparation of porous sound-absorbing materials from steel slag
- Peng SUN, Zhan-cheng GUO
- 17
- Synthesis and characterization of β-Ag2Se and β-AgCuSe nanoparticles via facile precipitation route
- P. PRATHIBA JEYA HELAN, K. MOHANRAJ, G. SIVAKUMAR
- 18
- Gas sensing properties of Y-doped ZnO nanosheets synthesized via combustion method
- Yan LI, Min LIU
- 19
- Synthesis of Ni0.8Co0.1Mn0.1(OH)2 precursor and electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathode material for lithium batteries
- Yue HUANG, Zhi-xing WANG, Xin-hai LI, Hua-jun GUO, Jie-xi WANG
- 20
- Mixed salts for lithium iron phosphate-based batteries operated at wide temperature range
- Zhi-an ZHANG, Xing-xing ZHAO, Bo PENG, Yan-qing LAI, Zhi-yong ZHANG, Jie LI
- 21
- Effect of Mg doping on electrochemical performance of Li3V2(PO4)3/C cathode material for lithium ion batteries
- Yun-ze LUO, Li-hua HE, Xu-heng LIU
- 22
- Synthesis and characterization of ZnTiO3 with high photocatalytic activity
- Xin YAN, Cui-lian ZHAO, Yi-long ZHOU, Zhen-jun WU, Jian-min YUAN, Wen-sheng LI
- 23
- Effect of Fe2O3 on non-isothermal crystallization of CaO-MgO-Al2O3-SiO2 glass
- Qing-chun YU, Chun-pei YAN, Yong DENG, Yue-bin FENG, Da-chun LIU, Bin YANG
- 24
- Mechanical properties, electrical conductivity and microstructure of CuCrZr alloys treated with thermal stretch process
- Bei ZHANG, Zhi-guo ZHANG, Wei LI
- 25
- Wear behavior of high strength and high conductivity Cu alloys under dry sliding
- Yuan GAO, Jin-chuan JIE, Peng-chao ZHANG, Jian ZHANG, Tong-min WANG, Ting-ju LI
- 26
- Preparation of gradient wettability surface by anodization depositing copper hydroxide on copper surface
- Jiang CHENG, Yi-fei SUN, An ZHAO, Zi-heng HUANG, Shou-ping XU
Computational Materials Science and Numerical Modelling
- 27
- Prediction of crack location and propagation in stretch flanging process of aluminum alloy AA-5052 sheet using FEM simulation
- Y. DEWANG, M. S. HORA, S. K. PANTHI
- 28
- Smoothed particle hydrodynamics modeling and simulation of foundry filling process
- Wen-jiong CAO, Zhao-yaoZHOU, Fang-mingJIANG
- 29
- Finite element modeling and experiment for behavior estimation of AlMn0.5Mg0.5 sheet during electromagnetic forming
- Dorin LUCA
- 30
- Effect of friction coefficient in deep drawing of AA6111 sheet at elevated temperatures
- Wen-yu MA, Bao-yu WANG, Lei FU, Jing ZHOU, Ming-dong HUANG
- 31
- Forming mechanism of ultrasonic vibration assisted compression
- Xin-cun ZHUANG, Jia-peng WANG, Huan ZHENG, Zhen ZHAO
- 32
- Simulation of pre-precipitation in Ni75Al14Mo11 alloy by microscopic phase-field model
- Jing-jing LIANG, Rui-qin LI, Yao-Hong ZHAO
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering
- 34
- Analysis and assessment of nickel and chromium pollution in soils around Baghejar Chromite Mine of Sabzevar Ophiolite Belt, Northeastern Iran
- Eisa SOLGI, Javad PARMAH
- 35
- Adsorption mechanism of 2-mercaptobenzothiazole on chalcopyrite and sphalerite surfaces: Ab initio and spectroscopy studies
- Fen JIAO, Wen-qing QIN, Rui-zeng LIU, Xing-jie WANG
- 36
- Bio-desilication of rutile concentrate and analysis of community structure in bio-desilication reactor
- Xiang-yu SONG, Guan-zhou QIU, Hai-dong WANG, Jian-ping XIE, Jing XU, Juan WANG
- 37
- Iron L-edge and sulfur K-edge XANES spectroscopy analysis of pyrite leached by Acidianus manzaensis
- Hong-chang LIU, Jin-lan XIA, Zhen-yuan NIE, Ya-long MA, Chen-yan MA, Lei ZHENG, Cai-hao HONG, Yi-dong ZHAO
- 38
- Non-isothermal thermal decomposition kinetics of high iron gibbsite ore based on Popescu method
- Zheng-gen LIU, Zheng WANG, Jue TANG, Hong-tao WANG, Hong-ming LONG
- 39
- Size dependent flow behaviors of particles in hydrocyclone based on multiphase simulation
- Rui CUI, Guang-hui WANG, Mao-lin LI
- 40
- Oxide film on bubble surface of aluminum foams produced by gas injection foaming process
- Yu-tong ZHOU, Yan-xiang LI
- 41
- Directional growth behavior of α(Al) dendrites during concentration-gradient- controlled solidification process in static magnetic field
- Lei</fnm> <snm>LI </snm></au>,<orf id=""> Bo XU, Wei-ping TONG, Li-zi HE, Chun-yan BAN, Hui ZHANG, Yu-bo ZUO, Qing-feng ZHU, <au><fnm>,<au><fnm>Jian-zhong</fnm> <snm>CUI
- 42
- Electrochemical migration behavior and mechanism of PCB-ImAg and PCB-HASL under adsorbed thin liquid films
- Kang-kang DING, Xiao-gang LI, Kui XIAO, Chao-fang DONG, Kai ZHANG, Rui-tao ZHAO
- 43
- Electrodeposition behavior of bright nickel in air and water-stable betaine·HCl-ethylene glycol ionic liquid
- Kai GONG, Yi-xin HUA, Cun-ying XU, Qi-bo ZHANG, Yan LI, Juan-jian RU, Ya-fei JIE
- 44
- Liquid drying of BeO gelcast green bodies using ethanol as liquid desiccant
- Xiao-feng WANG, Chao-qun PENG, Ri-chu WANG, Yue-hua SUN, Yi-xin CHEN
- 45
- Kinetics of reactive wetting of graphite by liquid Al and Cu-Si alloys
- Di Zhang, Ding-yi Zhu, Teng ZHANG, Qin-feng WANG
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9