ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 25 No. 8 August 2015
Structural Materials
- 1
- Effects of cold rolling and heat treatment on microstructure and mechanical properties of AA 5052 aluminum alloy
- Bo WANG, Xian-hua CHEN, Fu-sheng PAN, Jian-jun MAO,Yong FANG
- 2
- Comparison of microstructure and wear resistance of A356-SiCp composites processed via compocasting and vibrating cooling slope
- H. KHOSRAVI, F. AKHLAGHI
- 3
- Optimizing consolidation behavior of Al 7068-TiC nanocomposites using Taguchi statistical analysis
- Amin AZIMI, Ali SHOKUHFAR, Omid NEJADSEYFI, Hamid FALLAHDOOST, Saeid SALEHI
- 4
- Corrosion and electrochemical behaviors of 7A09 Al-Zn-Mg-Cu alloy in chloride aqueous solution
- Kun ZHOU, Bin WANG, Yu ZHAO, Jie LIU
- 5
- Porosity sensitivity of A356 Al alloy during fiber laser welding
- Kai LI, Feng-gui LU, Song-tao GUO, Hai-chao CUI, Xin-hua TANG
- 6
- Effect of welding heat input and post-welded heat treatment on hardness of stir zone for friction stir-welded 2024-T3 aluminum alloy
- Yu CHEN, Hua DING, Ji-zhong LI, Jing-wei ZHAO, Ming-jie FU, Xiao-hua LI
- 7
- Microstructures and mechanical properties of metal inert-gas arc welded Mg-steel dissimilar joints
- Xiao-yong WANG, Da-qian SUN, Shi-qiang YIN, Dong-yang LIU
- 8
- Wear behavior and mechanism of B4C reinforced Mg-matrix composites fabricated by metal-assisted pressureless infiltration technique
- Yan-tao YAO, Lan JIANG, Gao-feng FU, Li-qing CHEN
- 9
- Microstructural stability of long term aging treated Ti-22Al-26Nb-1Zr orthorhombic titanium aluminide
- Tie-bang ZHANG, Gang HUANG, Rui HU, Jin-shan LI
- 10
- Corrosion behavior of Ti-Nb-Ta-Zr-Fe alloy for biomedical applications in Ringer’s solution
- Yan-fei XU, Yi-feng XIAO, Dan-qing YI, Hui-qun LIU, Liang WU, Jing WEN
- 11
- Thermal activation parameters of V-5Cr-5Ti alloy under hot compression
- Yu-fei LI, Zhen-hong WANG, Yun-hong ZHOU, Chao LUO, Xin-chun LAI
- 12
- Segmentation of copper alloys processed by equal-channel angular pressing
- Omid NEJADSEYFI, Ali SHOKUHFAR, Vahid MOODI
Functional Materials
- 13
- Microstructure and superhardness effect of VC/TiC superlattice films
- Xue-chao DONG, Jian-ling YUE, En-qing WANG, Miao-lei LI, Ge-yang LI
- 14
- Effect of Al-deposition on erosion resistance of plasma sprayed thermal barrier coating
- Xiao-feng ZHANG, Ke-song ZHOU, Shu-juan DONG, Wei XU, Jin-bing SONG, Min LIU
- 15
- Corrosion properties of stainless steel 316L/Ni-Cu-P coatings in warm acidic solution
- Xin-xian FANG, Heng-zhi ZHOU, Ya-jun XUE
- 16
- Hydrophilic and photocatalytic activities of Nd-doped titanium dioxide thin films
- Jun DU, Xin GU, Qi WU, Jiao LIU, Hai-zhi GUO, Jian-guo ZOU
- 17
- Influence of processing parameters on laser metal deposited copper and titanium alloy composites
- Mutiu F. ERINOSHO, Esther T. AKINLABI, Sisa PITYANA
- 18
- Transition of plasticity and fracture mode of Zr-Al-Ni-Cu bulk metallic glasses with network structures
- An-hui CAI, Da-wei DING, Wei-ke AN, Guo-jun ZHOU, Yun LUO, Jiang-hong LI, Yong-yi PENG
- 19
- Effect of melt infiltration parameters on microstructure and mechanical properties of tungsten wire reinforced (Cu50Zr43Al7)99.5Si0.5 metallic glass matrix composite
- Ebrahim Karimi SAEIDABADI, Reza GHOLAMIPOUR, Behrouz GHASEMI
- 20
- Thermodynamics and characterization of shape memory Cu-Al-Zn alloys
- Lidija GOMID?ELOVI?, Emina PO?EGA, Ana KOSTOV, Nikola VUKOVI?, Vesna KRSTI?, Dragana ?IVKOVI?, Ljubi?a BALANOVI?
- 21
- Dielectric properties and relaxation dynamics in PbF2-TeO2-B2O3-Eu2O3 glasses
- Akshatha WAGH, Y. RAVIPRAKASH, Sudha D. KAMATH
- 22
- Preparation of Cr2O3-based pigments with high NIR reflectance via thermal decomposition of CrOOH
- Shu-ting LIANG, Hong-ling ZHANG , Min-ting LUO, Hong-xia LIU, Yu-lan BAI, Hong-bin XU, Yi ZHANG
- 23
- Preparation of fibrous nickel powder by precipitation transformation coupled with thermal decomposition
- Jian-hui WU, Gang LIU, Tao SU, Wen-hong ZHANG, Mei-mei LUO, Tao WEI
- 24
- Fe3+/Fe2+ redox electrolyte for high-performance polyaniline/SnO2 supercapacitors
- Tian-tian LIU, Yin-hai ZHU, En-hui LIU, Zhen-yu LUO, Tian-tian HU, Zeng-peng LI, Rui DING
Computational Materials Science and Numerical Modelling
- 25
- Atomic simulation for influence of helium atom on movement of edge dislocation in nickel
- Xi-yuan YANG
- 26
- Horizontal continuous casting process under electromagnetic field for preparing AA3003/AA4045 clad composite hollow billets
- Li WU, Hui-jun KANG, Zong-ning CHEN, Ning LIU, Tong-min WANG
- 27
- Electroplastic effect in AZ31B magnesium alloy sheet through uniaxial tensile tests
- Huan-yang XIE, Qian WANG, Fang PENG, Kai LIU, Xiang-huai DONG, Jian-feng WANG
- 28
- Nominal friction coefficient in spread formulas based on lead rolling experiments
- Hong-yu WANG, Yu-kun HU, Feng GAO, De-wen ZHAO, Dian-hua ZHANG
- 29
- Prediction of vulnerable zones based on residual stress and microstructure in CMT welded aluminum alloy joint
- Feng-yuan SHU, Ze TIAN, Yao-hui Lü, Wen-xiong HE, Fei-yang Lü, Jian-jun LIN, Hong-yun ZHAO, Bin-shi XU
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering
- 30
- Mechanical behavior of red sandstone under cyclic point loading
- Zi-long ZHOU, Zhi-bo WU, Xi-bing LI, Xiang LI, Chun-de MA
- 31
- Function of microorganism and reaction pathway for carrollite dissolution during bioleaching
- Hong-ying YANG, Wei LIU, Guo-bao CHEN, Yuan-yuan LIU, Lin-lin TONG, Zhe-nan JIN, Zi-long LIU
- 32
- Surface species of chalcopyrite during bioleaching by moderately thermophilic bacteria
- Hong-bo ZHAO, Jun WANG, Wen-qing QIN, Xi-hua ZHENG, Lang TAO, Xiao-wen GAN, Guan-zhou QIU
- 33
- Crystallization of gibbsite from synthetic chromate leaching solution in sub-molten salt process
- Pei-yu ZHANG, Guang-ye WEI, Qiang GUO, Jing-kui QU, Tao QI
- 34
- Selective reduction process of zinc ferrite and its application in treatment of zinc leaching residues
- Gang YU, Ning PENG, Lan ZHOU, Yan-jie LIANG, Xiao-yuan ZHOU, Bing PENG, Li-yuan CHAI, Zhi-hui YANG
- 35
- Optimization of selective leaching of Zn from electric arc furnace steelmaking dust using response surface methodology
- Mehmet KUL, Kür?ad O?uz OSKAY, Mehmet ??M??R, Halit SüBüTAY, Habip KIRGEZEN
- 36
- Comparative studies on hydrometallurgical treatment of smelted low-grade electronic scraps for selective copper recovery
- Ewa RUDNIK, Karolina KO?CZYK, Dawid KUTY?A
- 37
- Vapor pressure measurement of lead and lead chlorides in FeOT-CaO-SiO2-Al2O3 system
- Yan-ling ZHANG, Eiki KASAI
- 38
- Oxidation kinetics of oxide film on bubble surface of aluminum foams produced by gas injection foaming process
- Yu-tong ZHOU, Yan-xiang LI
- 39
- Rheological property and drying mechanism of thermoresponsive gelcasting of ZnO
- Xiao-feng WANG, Ri-chu WANG, Chao-qun PENG, Wen-yan SUN, Yue-hua SUN
- 40
- New interpretation of experimental data on Si-As alloy solidification with planar interface
- S. L. SOBOLEV
- 41
- Role of Ni content in improvement of corrosion resistance of Zn-Ni alloy in 3.5% NaCl solution. Part I: Polarization and impedance studies
- Hany M. ABD EL-LATEEF, Abdel-Rahman EL-SAYED, Hossnia S. MOHRAN
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9