ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 26 No. 4 April 2016
Structural Materials
- 1
- Characteristics evolution of 6009/7050 bimetal slab prepared by direct-chill casting process
- Guang-yuan YAN, Feng MAO, Fei CHEN, Wei WU, Zhi-qiang CAO, Tong-min WANG, Ting-ju LI
- 2
- Development of functionally graded aluminium composites using centrifugal casting and influence of reinforcements on mechanical and wear properties
- N. RADHIKA, R. RAGHU
- 3
- Wearing resistance of in-situ Al-based composites with different SiO2/C/Al molar ratios fabricated by reaction hot pressing
- El Oualid MOKHNACHE, Gui-song WANG, Lin GENG
- 4
- Effects of high temperature pre-straining on natural aging and bake hardening response of Al-Mg-Si alloys
- Zhi-hong JIA, Li-peng DING, Yao-yao WENG, Zhang WEN, Qing LIU
- 5
- Production of grain-refined AC7A Al-Mg alloy via solidification in ultrasonic field
- W. KHALIFA, Y. TSUNEKAWA
- 6
- Effect of T7951 secondary aging treatment on crack propagation behavior of 7055 aluminum alloy
- Song ZHOU, Lei WANG, Li-yang XIE, Li HUI, Liang XU
- 7
- Hot deformation behavior of homogenized Al-3.2Mg-0.4Er aluminum alloy
- Jian PENG, Yong-jian WANG, Li-ping ZHONG, Long-fei PENG, Fu-sheng PAN
- 8
- Effect of various melt and heat treatment conditions on impact toughness of A356 aluminum alloy
- M. AMNE ELAHI, S. G. SHABESTARI
- 9
- Strain rate-dependent high temperature compressive deformation characteristics of ultrafine-grained pure aluminum produced by ECAP
- Ying YAN, Yue QI, Li-jia CHEN, Xiao-wu LI
- 10
- Fracture energy evaluation on 7075-T651 aluminum alloy welds determined by instrumented impact pendulum
- R. R. AMBRIZ, D. JARAMILLO, C. GARCíA, F. F. CURIEL
- 11
- Effect of pin profile and process parameters on microstructure and mechanical properties of friction stir welded Al-Cu joints
- M. FELIX XAVIER MUTHU, V. JAYABALAN
- 12
- Microstructure and mechanical properties of pulsed laser welded Al/steel dissimilar joint
- Jin YANG, Yu-long LI, Hua ZHANG
- 13
- Dynamic recrystallization behavior of burn resistant titanium alloy Ti-25V-15Cr-0.2Si
- Shi-qiang LU, De-lai OUYANG, Xia CUI, Ke-lu WANG
- 14
- Effect of electrochemical state on corrosion-wear behaviors of TC4 alloy in artificial seawater
- Jun CHEN, Qing ZHANG
- 15
- Preparation of micro-nanostructure on titanium implants and its bioactivity
- Rui Zhang, Yi Wan , Xing Ai,Teng Wang, Bo Men
- 16
- Microstructure and mechanical properties of Fe-doped NiAl-28Cr-6Mo eutectic alloys
- A. GUNGOR, H. DEMIRTAS
- 17
- Hot deformation behavior of spray forming LSHR alloy using constitutive equation and processing map
- Yi XU, Jie WANG
- 18
- Effect of strain rate and deformation temperature on strain hardening and softening behavior of pure copper
- Shu-hai HUANG, Da-yu SHU, Chuan-kai HU, Shi-feng ZHU
Computational Materials Science and Numerical Modelling
- 19
- Thermodynamic assessment of Ni-Yb binary system
- Dai-man ZHU, Chang-rong LI, Cui-ping GUO, Zhen-min DU, Jun-qin LI
- 20
- Polycrystal modeling of hot extrusion texture of AZ80 magnesium alloy
- Yi-chuan SHAO, Tao TANG, Da-yong LI, Guo-wei ZHOU, Shao-rui ZHANG, Ying-hong PENG
- 21
- Quantitative calculation on atomic site occupation during precipitation of Ni3(Al1-xFex) by microscopic phase-field study
- Hai-hong LIAO, Min-jie LIANG, Pei-kang BAI
- 22
- Constitutive equations of 1060 pure aluminum based on modified double multiple nonlinear regression model
- Pan LI, Fu-guo LI, Jun CAO, Xin-kai MA, Jing-hui LI
- 23
- Modeling constitutive relationship of 6013 aluminum alloy during hot plane strain compression based on Kriging method
- Gang XIAO, Qin-wen YANG, Luo-xing LI
- 24
- Identification of constitutive model parameters for nickel aluminum bronze in machining
- Zhong-tao FU, Wen-yu YANG, Si-qi ZENG, Bu-peng GUO, Shu-bing HU
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering
- 25
- Flotation of low-grade bauxite using organosilicon cationic collector and starch depressant
- Xin-yang YU, Hao-lin WANG, Qiang-qiang WANG, Bo FENG, Hong ZHONG
- 26
- Separation of manganese from calcium and magnesium in sulfate solutions via carbonate precipitation
- Qing-quan LIN, Guo-hua GU, Hui WANG, Chong-qing WANG, You-cai LIU, Ren-feng ZHU, Jian-gang FU
- 27
- Influence of sodium silicate on manganese electrodeposition in sulfate solution
- Jian-rong XUE, Hong ZHONG, Shuai WANG, Chang-xin LI, Fang-fang WU
- 28
- Reaction pathway and kinetics of CdO nanoparticles prepared from CdCO3 precursor using thermal decomposition method
- Gholam Reza KHAYATI, Seyed Hadi SHAHCHERAGHI, Vahid LOTFI, Esmael DAREZARESHKI
- 29
- In situ investigation of atmospheric corrosion behavior of PCB-ENIG under adsorbed thin electrolyte layer
- Pan YI, Kui XIAO, Kang-kang DING, Gang LI, Chao-fang DONG, Xiao-gang LI
- 30
- High temperature oxidation behavior of Ti(Al,Si)3 diffusion coating on γ-TiAl by cold spray
- Ji-qiang WANG, Ling-yan KONG, Tie-fan LI, Tian-ying XIONG
- 31
- Oxidation behavior of RE-modified nickel-based superalloy between 950 °C and 1150 °C in air
- Long-fei LIU, Shu-sen WU, Yang CHEN, Shu-lin Lü
- 32
- Bimodal-grained Ti fabricated by high-energy ball milling and spark plasma sintering
- Yan LONG, Wen-jing GUO, Ying LI
- 33
- Low frequency damping behavior associated with sintering process in Al powder compact
- Gang-ling HAO, Xian-yu LI, Wei-guo WANG
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9