ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 26 No. 6 June 2016
Structural Materials
- 1
- Stress corrosion cracking behaviour of 7xxx aluminum alloys:A literature review
- A. C. UMAMAHESHWER RAO, V. VASU, M. GOVINDARAJU, K. V. SAI SRINADH
- 2
- Influence of thermomechanical treatments on localized corrosion susceptibility and propagation mechanism of AA2099 Al-Li alloy
- Yan-long MA, Xiao-rong ZHOU, Xiao-min MENG, Wei-jiu HUANG, Yi LIAO, Xiao-li CHEN, Ya-nan YI, Xin-xin ZHANG, G. E. THOMPSON
- 3
- Effect of pre-deformation on microstructures and mechanical properties of high purity Al-Cu-Mg alloy
- Hui-zhong LI , Ruo-mei LIU, Xiao-peng LIANG, Min DENG, Hui-juan LIAO, Lan HUANG
- 4
- Dynamic recrystallization behavior of 7085 aluminum alloy during hot deformation
- Dong-feng LI, Duan-zheng ZHANG, Sheng-dan LIU, Zhao-jun SHAN, Xin-ming ZHANG, Qin WANG, Su-qi HAN
- 5
- Prediction of influence of process parameters on tensile strength of AA6061/TiC aluminum matrix composites produced using stir casting
- J. JEBEEN MOSES, I. DINAHARAN, S. JOSEPH SEKHAR
- 6
- Corrosion influence on surface appearance and microstructure of compo cast ZA27/SiCp composites in sodium chloride solution
- Biljana Bobi？, Jelena Bajat, Ilija Bobi？, Bore Jegdi？
- 7
- Effect of laser shock processing on erosive resistance of 6061-T6 aluminum
- J. IBARRA, E. RODRíGUEZ, O. JIMéNEZ, G. GóMEZ-ROSAS, M. FLORES, J. VERDUZCO, J. CHáVEZ
- 8
- Correction of buckling distortion by ultrasonic shot peening treatment for 5A06 aluminum alloy welded structure
- Ya-zhang HE, Dong-po WANG, Ying WANG, Hai ZHANG
- 9
- Reverse deep drawability of 5A06 aluminum alloy plate at elevated temperatures
- Zhi-chao ZHANG, Yong-chao XU, Shi-jian YUAN
- 10
- Hot bend assisted gas forming of AA5083 sheet for making V-shaped trough containing deep uneven concavities
- Jung-Sung TANG, Shyong LEE
- 11
- Microstructure and properties of Al/Cu bimetal in liquid-solid compound casting process
- Yuan HU, Yi-qing CHEN, Li LI, Huan-dong HU, Zi-ang ZHU
- 12
- Microstructural evolution and phase transformation during partial remelting of in-situ Mg2Sip/AM60B composite
- Su-qing ZHANG, Ti-jun CHEN, Fa-liang CHENG, Lei-liang LI
- 13
- Microstructure, mechanical and bio-corrosion properties of as-extruded Mg-Sn-Ca alloys
- Chao-yong ZHAO, Fu-sheng PAN, Hu-cheng PAN
- 14
- Characterization of discontinuous yielding phenomenon in isothermal compression of TC8 titanium alloy
- Ke WANG, Miao-quan LI
- 15
- Hot workability of cast and wrought Ni-42Cu alloy through hot tensile and compression tests
- M. ARJMAND, S. M. ABBASI, A. KARIMI TAHERI, A. MOMENI
- 16
- Microstructure and phase precipitate behavior of Inconel 740H during aging
- Yan GUO, Tai-jiang LI, Cai-xia WANG, Shu-fang HOU, Bo-han WANG
Functional Materials
- 18
- Combined effect of isothermal annealing and pre-compression on mechanical properties of Cu36Zr48Al8Ag8 bulk metallic glass
- Ji GU, Li-xin ZHANG, Yi-han WANG, Song NI, Sheng-feng GUO, Min SONG
- 19
- Fabrication, tribological and corrosion behaviors of detonation gun sprayed Fe-based metallic glass coating
- Hong WU, Xiao-dong LAN, Yong LIU, Fei LI, Wei-dong ZHANG, Zi-jin CHEN, Xiong-fei ZAI, Han ZENG
- 20
- Effect of 10% Si addition on cathodic arc evaporated TiAlSiN coatings
- Li-hui ZHU, Cheng SONG, Wang-yang NI, Yi-xiong LIU
- 21
- Evaluation of three kinds of MCrAlY coatings produced by electrospark deposition
- Yu-jiang XIE, De WANG, Ming-sheng WANG, Wei YE
- 22
- Structural and optoelectronic properties of AZO thin films prepared by RF magnetron sputtering at room temperature
- Yi-hua SUN, Hai-lin WANG, Jian CHEN, Liang FANG, Lei WANG
- 23
- Drop failure modes of Sn-3.0Ag-0.5Cu solder joints in wafer level chip scale package
- Ming-liang HUANG, Ning ZHAO, Shuang LIU, Yi-qian HE
- 24
- Luminescent properties of Lu2MoO6:Eu3+ red phosphor for solid state lighting
- Li LI, Jun SHEN, Xian-ju ZHOU, Yu PAN, Wen-xuan CHANG, Qi-wei HE, Xian-tao WEI
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering
- 25
- Petrogenesis of skarn in Shizhuyuan W-polymetallic deposit, southern Hunan, China:Constraints from petrology, mineralogy and geochemistry
- Yong-sheng CHENG
- 26
- Leaching kinetics of zinc silicate in ammonium chloride solution
- Sheng-hai YANG, Hao LI, Yan-wei SUN, Yong-ming CHEN, Chao-bo TANG, Jing HE
- 27
- Recovery of titanium from undissolved residue (tionite) in titanium oxide industry via NaOH hydrothermal conversion and H2SO4 leaching
- Fan-cheng MENG, Tian-yan XUE, Ya-hui LIU, Guo-zhi ZHANG, Tao QI
- 28
- Electrodeposition of cobalt in double-membrane three-compartment electrolytic reactor
- Jian ZHOU, San-fan WANG, Xiao-san SONG
- 29
- Effects of electrolyte recycling on desulfurization from bauxite water slurry electrolysis
- Ai-jing Lü, Yi-qi SHEN, Xu-zhong GONG, Zhi WANG, Yu-hua WANG, Ming-yong WANG
- 30
- Copper corrosion in hot and dry atmosphere environment in Turpan, China
- De-cheng KONG, Chao-fang DONG, Yue-hua FANG, Kui XIAO, Chun-yun GUO, Gang HE, Xiao-gang LI
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9