ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 30 No. 1 January 2020
Materials Science and Engineering
- 1
- Effect of melt holding on morphological evolution and sedimentation behavior of iron-rich intermetallic phases in Al-Si-Fe-Mn-Mg alloy
- Dong-fu SONG, Shun-cheng WANG, Yu-liang ZHAO, Shu-hong LIU, Yong DU, Yue-hua KANG, Zhi WANG, Wei-wen ZHANG
- 2
- 2024 aluminum alloy ultrahigh-strength sheet due to two-level nanostructuring under cryorolling and heat treatment
- Stanislav KRYMSKIY, Oleg SITDIKOV, Elena AVTOKRATOVA, Michael MARKUSHEV
- 3
- Effects of strain rate on mechanical properties, microstructure and texture of Al-Mg-Si-Cu alloy under tensile loading
- Xiao-feng WANG, Tong-ya SHI, He-bin WANG, Song-ze ZHOU, Wen-fei PENG, Yong-gang WANG
- 4
- Biaxial mechanical behavior of closed-cell aluminum foam under combined shear-compression loading
- Zhi-bin LI, Xue-yan LI, Yu-xuan ZHENG
- 5
- Mechanical properties and microstructure evolution in incremental forming of AA5754 and AA6061 aluminum alloys
- Ghulam HUSSAIN, Muhammad ILYAS, B. B. LEMOPI ISIDORE, Wasim A. KHAN
- 6
- Microstructure, mechanical properties and two-body abrasive wear behaviour of hypereutectic Al-Si-SiC composite
- Raj Kumar SINGH, Amit TELANG, Satyabrata DAS
- 7
- Effects of welding parameters and welding sequence on residual stress and distortion in Al6061-T6 aluminum alloy for T-shaped welded joint
- Amirreza KHOSHROYAN, Armin Rahmati DARVAZI
- 8
- Evaluation of nanometer-sized zirconium oxide incorporated Al-Mg-Ga-Sn alloy as anode for alkaline aluminum batteries
- Mortaza AFSHARI, Robab ABBASI, Mohammad Reza SOVIZI
- 9
- Microstructure and strengthening mechanism of Mg-5.88Zn-0.53Cu-0.16Zr alloy solidified under high pressure
- Kun-yu GUO, Chang XU, Xiao-ping LIN, Jie YE, Chong ZHANG, Duo HUANG
- 10
- Effects of punch velocity on microstructure and tensile properties of thixoforged Mg2Sip/AM60B composite
- Su-qing ZHANG, Ti-jun CHEN, Ji-xue ZHOU
- 11
- Zinc-doped hydroxyapatite-zeolite/polycaprolactone composites coating on magnesium substrate for enhancing in-vitro corrosion and antibacterial performance
- Nida IQBAL, Saman IQBAL, Tanveer IQBAL, H. R. BAKHSHESHI-RAD, Ahmed ALSAKKAF, Ahmad KAMIL, Mohammed Rafiq ABDUL KADIR, Mohd Hasbullah IDRIS, H. Balaji RAGHAV
- 12
- Hot deformation behavior of Ti-6Al-4V-0.1Ru alloy during isothermal compression
- Yu-feng XIA, Wei JIANG, Qian CHENG, Lai JIANG, Li JIN
- 13
- High pressure EIGA preparation and 3D printing capability of Ti-6Al-4V powder
- Kuai-kuai GUO, Chang-sheng LIU, Sui-yuan CHEN, Huan-huan DONG, Si-yu WANG
- 14
- Microstructure and high-temperature mechanical properties of laser beam welded TC4/TA15 dissimilar titanium alloy joints
- Wei-feng XU, Jun MA, Yu-xuan LUO, Yue-xiao FANG
- 15
- Induced antibacterial capability of TiO2 coatings in visible light via nitrogen ion implantation
- Li ZHENG, Shi QIAN, Xuan-yong LIU
- 16
- Indentation size effect of germanium single crystal with different crystal orientations
- NingLIU, Xiao-jing YANG, Zheng YU, Lei ZHAO
- 17
- Structural, optical properties and optical modelling of hydrothermal chemical growth derived ZnO nanowires
- Hin On CHU, Quan WANG, Yong-jing SHI, Shi-geng SONG, Wei-guo LIU, Shun ZHOU, Des GIBSON, Yahya ALAJLANI, Cheng LI
Mining, Minerals Processing and Metallurgical Engineering
- 18
- Photogenerated-hole scavenger for enhancing photocatalytic chalcopyrite bioleaching
- Bao-jun YANG, Wen LUO, Qi LIAO, Jian-yu ZHU, Min GAN, Xue-duan LIU, Guan-zhou QIU
- 19
- Preparation and characterization of Martian soil simulant NEU Mars-1
- Jin-zhao GUAN, Ai-min LIU, Kai-yu XIE, Zhong-ning SHI, Blanka KUBIKOVA
- 20
- Separation of arsenic from arsenic-antimony-bearing dust through selective oxidation-sulfidation roasting with CuS
- Da-peng ZHONG, Lei LI
- 21
- Adsorption behavior of Sb(III) in single and binary Sb(III)-Fe(II) systems on cationic ion exchange resin: Adsorption equilibrium, kinetic and thermodynamic aspects
- F. MOGHIMI, A. H. JAFARI, H. YOOZBASHIZADEH, M. ASKARI
- 22
- Experiment and numerical simulation of two-phase flow in oxygen enriched side-blown furnace
- Yan-ting LIU, Tian-zu YANG, Zhuo CHEN, Zhen-yu ZHU, Ling ZHANG, Qing HUANG
- 23
- Synergistic inhibition effect of poly(ethylene glycol) and cetyltrimethylammonium bromide on corrosion of Zn and Zn-Ni alloys for alkaline batteries
- Hany M. ABD EL-LATEEF, Mahmoud ELROUBY
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9