ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 23 No. 4 April 2013
Structural Materials
- 1
- Phase equilibria in Mg-rich corner of Mg-Ca-RE (RE=Gd, Nd) systems at 400 °C
- Hou-jun FEI, Guang-long XU, Li-bin LIU, Hong BO, Li-jun ZENG, Cui-ping CHEN
- 2
- Microstructure and phase composition of as-cast Mg-9Er-6Y-xZn-0.6Zr alloys
- Jing-feng WANG, Peng-fei SONG, Fu-sheng PAN, Xiao-en ZHOU
- 3
- Microstructure, mechanical properties and creep resistance of Mg-(8%-12%)Zn-(2%-6%)Al alloys
- Xiao-feng WAN, Hong-jun NI, Ming-yu HUANG, Hua-li ZHANG, Jian-hua SUN
- 4
- Effects of Sn on microstructure of as-cast and as-extruded Mg-9Li alloys
- Bin JIANG, Ying ZENG, Ming-xing ZHANG, Heng-mei YIN, Qing-shan YANG, Fu-sheng PAN
- 5
- Application of cyclic upsetting-extrusion to semi-solid processing of AZ91D magnesium alloy
- Jian-quan TAO, Ju-fu JIANG, Hong CHEN, Yuan-lun XIAO, Rong-chao ZHANG, Qing-hua HU, Jun ZHAO, Qiang ZHAO
- 6
- Influence of strain rate on microstructure and formability of AZ31B magnesium alloy sheets
- Li-fei WANG, Guang-sheng Huang, Hong-cheng LI, Hua ZHANG
- 7
- Effects of temperature on fracture behavior of Al-based in-situ composites reinforced with Mg2Si and Si particles fabricated by centrifugal casting
- Bo LI, Kai WANG, Ming-xiang LIU, Han-song XUE, Zi-zong ZHU, Chang-ming LIU
- 8
- Corrosion behaviour of thixoformed and heat-treated ZA27 alloys in NaCl solution
- Biljana BOBIC, Jelena BAJAT, Zagorka ACIMOVIC-PAVLOVIC, Ilija BOBIC, Bore JEGDIC
- 9
- Multi-objective optimization of friction stir welding parameters using desirability approach to join Al/SiCp metal matrix composites
- P. PERIYASAMY, B. MOHAN, V. BALASUBRAMANIAN, S. RAJAKUMAR, S. VENUGOPAL
- 10
- Effect of initial microstructure on hot workability of 7085 aluminum alloy
- Song-yi CHEN, Kang-hua CHEN, Guo-sheng PENG, Le JIA
- 11
- Formability of AA5052/polyethylene/AA5052 sandwich sheets
- Jian-guang LIU, Wei XUE
- 12
- Microstructures and properties of Al-45%Si alloy prepared by liquid-solid separation process and spray deposition
- Yan-xia LI, Jun-you LIU, Wen-shao WANG, Guo-quan LIU
- 13
- Influence of technical parameters on strength and ductility of AlSi9Cu3 alloys in squeeze casting
- Shi-bo BIN, Shu-ming XING, long-mei TIAN, Ning ZHAO, Lan LI
- 14
- Microstructure and room temperature mechanical properties of NiAl-Cr(Mo)-(Hf, Dy) hypoeutectic alloy prepared by injection casting
- Li-yuan SHENG, Fang YANG, Ting-fei XI, Yu-feng ZHENG, Jian-ting GUO
- 15
- Formation condition of solid solution type high-entropy alloy
- Ming-xing REN, Bang-sheng LI, Heng-zhi FU
Functional Materials
- 16
- In vitro corrosion and biocompatibility of phosphating modified WE43 magnesium alloy
- Cheng-hong YE, Ting-fei XI, Yu-feng ZHENG, Shu-qin WANG, Yang-de LI
- 17
- Cavitation and electrochemical characteristics of thermal spray coating with sealing material
- Seong-Jong KIM, Seung-Jun LEE, In-Ju KIM, Seong-Kweon KIM, Min-Su HAN, Seok-Ki JANG
- 18
- Reactive HVOF sprayed TiN-matrix composite coating and its corrosion and wear resistance properties
- Jing MA, Dong-qing YAN, Jian-wen HU, Xin ZHANG, Yang LI
- 19
- Photocatalytic activity and kinetics for acid yellow degradation over surface composites of TiO2-coated activated carbon under different photocatalytic conditions
- Meng-xiong ZENG, You-ji LI, Ming-yuan MA, Wei CHEN, Lei-yong LI
- 20
- Preparation and electrochemical performance of 2LiFe1-xCoxPO4-Li3V2(PO4)3/C cathode material for lithium-ion batteries
- Jia-feng ZHANG, Bao ZHANG, Xue-yi GUO, Xing OU, Jian-long WANG, Chun-li PENG, Jun-chao ZHENG, He-zhang CHEN, Chao SHEN
- 21
- Preparation and electrochemical performance of nano-scale Ni(OH)2 doped with zinc
- Li ZHAO, Zhi-hao LIU, Lei JIN
- 22
- Effect of pretreatment on electrochemical etching behavior of Al foil in HCl-H2SO4
- Chao-lei BAN, Ye-dong HE, Xin SHAO, Juan DU
- 23
- Fractal dimension for porous metal materials of FeCrAl fiber
- Jian-zhong WANG, Zheng-ping XI, Hui-ping TANG, Wei-dong HUANG, Ji-lei ZHU, Qing-bo AO
Computational Materials Science and Numerical Modelling
- 24
- Simulation study on non-linear effects of initial melt temperatures on microstructures during solidification process of liquid Mg7Zn3 alloy
- Rang-su LIU, Yong-chao LIANG, Hai-rong LIU, Nai-chao ZHENG, Yun-fei MOZhao-yang HOU, Li-li ZHOU, Ping PENG
- 25
- Springback prediction for incremental sheet forming based on FEM-PSONN technology
- Fei HAN, Jian-hua MO, Hong-wei QI, Rui-fen LONG, Xiao-hui CUI, Zhong-wei LI
- 26
- Fracture strength evaluation of titanium alloys using modified average stress criterion
- H. BRIGHTON ISAAC JOHN, T. CHRISTOPHER
- 27
- Strain rate sensitivity of closed cell aluminium fly ash foam
- Manmohan DASS GOEL, Vasant A. MATSAGAR,Anil K. GUPTA, Steffen MARBURG
- 28
- Theoretical prediction of effective elastic constants for new intermetallic compound porous material
- Shu-lan SU, Qiu-hua RAO, Yue-hui HE
- 29
- Effect of die inlet geometry on extrusion of clover sections through curved dies: Upper bound analysis and experimental verification
- Tahir ALTINBALIK, Onder AYER
- 30
- Continuous extrusion and rolling forming velocity of copper strip
- Xin-bing YUN, Wei YOU, Ying ZHAO, Bing LI, Zhi-xin FAN
- 31
- Thermal modeling of underwater friction stir welding of high strength aluminum alloy
- Hui-jie ZHANG, Hui-jie LIU, Lei YU
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering
- 32
- Mechanisms of surface charge development of serpentine mineral
- Bo FENG, Yi-ping LU, Qi-ming FENG, Peng DING, Na LUO
- 33
- Mechano-chemical sulfidization of zinc oxide by grinding with sulfur and reductive additives
- Li-yuan CHAI, Yan-jie LIANG, Yong KE, Xiao-bo MIN, Chong-jian TANG,Hai-jing ZHANG, Xian-de XIE, Cui-yu YUAN<
- 34
- Precursor solution prepared by evaporation deamination complex method for solvent separation of Mo and W by H2O2-complexation
- Wen-juan GUAN, Gui-qing ZHANG, Cong-jie GAO
- 35
- Adsorption and reduction of platinum(IV) chloride complex ions on activated carbon
- Marek WOJNICKI, Krzysztof PACLAWSKI, Robert P. SOCHA, Krzysztof FITZNER
- 36
- Electrochemical behavior of Li+, Mg2+, Na+ and K+ in LiFePO4/ FePO4 structures
- Zhong-wei ZHAO, Xiu-fen SI, Xin-xing LIANG, Xu-heng LIU, Li-hua HE
- 37
- Fe extraction from high-silicon and aluminum cyanide tailings by pretreatment of water leaching before magnetic separation
- Ya-li ZHANG, Huai-mei LI, Xian-jin YU
- 38
- Preparation of Ti-rich material from titanium slag by activation roasting followed by acid leaching
- Shui-shi LIU, Yu-feng GUO, Guan-zhou QIU, Tao JIANG, feng CHEN
- 39
- Thermodynamics of leaching roasted jarosite residue from zinc hydrometallurgy in NH4Cl system
- Shao-hua JU, Li-bo ZHANG, Jin-hui PENG, Zhe SHI,Sheng-hui GUO, Bin-guo LIU, Ya-jian WANG
- 40
- Hydrothermal synthesis of titanium-supported nanoporous palladium-copper electrocatalysts for formic acid oxidation and oxygen reduction reaction
- Qing-feng YI, Xing-zhong XIAO, Yun-qing LIU
- 41
- Electrosynthesis and physicochemical properties of α-PbO2-CeO2-TiO2 composite electrodes
- Bu-ming CHEN, Zhong-cheng GUO, Rui-dong XU
- 42
- Effects of magnesium chloride-based multicomponent salts on atmospheric corrosion of aluminum alloy 2024
- Bin-bin WANG, Zhen-yao WANG, Wei HAN, Chuan WANG, Wei KE
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9