ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 30 No. 12 December 2020
Materials Science and Engineering
- 1
- Prediction of hot tearing susceptibility of direct chill casting of AA6111 alloys via finite element simulations
- Dong-xu CHEN, Rui-feng DOU, Jia-qiang HAN, Jun-sheng WANG
- 2
- Microstructure and mechanical properties of 7075 aluminum alloy during complex thixoextrusion
- Jian LIU, Yuan-sheng CHENG, Sin Wing Norman CHAN, Daniel SUNG
- 4
- Fatigue strength and microstructure evaluation of Al 7050 alloy wires recycled by spray forming, extrusion and rotary swaging
- Jo？o G. J. de SALVO, Conrado R. M. AFONSO
- 5
- Microstructure and mechanical properties of ADC12 composites reinforced with graphene nanoplates prepared by ultrasonic assisted casting
- Jun-jie XIONG, Hong YAN
- 6
- Combined powder metallurgy routes to improve thermal and mechanical response of Al-Sn composite phase change materials
- Chiara CONFALONIERI, Maxime PERRIN, Elisabetta GARIBOLDI
- 7
- Effect of brazing parameters on fillet size and microstructure of cladded fin-microchannel tube joints
- J. C. GUíA-TELLO, M. I. PECH-CANUL, E. TRUJILLO-VáZQUEZ, M. A. PECH-CANUL
- 8
- Microstructure and tensile properties of rapid-cooling friction-stir-welded AZ31B Mg alloy along thickness direction
- Nan XU, Wei-da ZHANG, Si-qi CAI, Yue ZHUO, Qi-ning SONG, Ye-feng BAO
- 9
- Influence of multipass high rotating speed friction stir processing on microstructure evolution, corrosion behavior and mechanical properties of stirred zone on AZ31 alloy
- Fen-jun LIU, Yan JI, Yan-xia BAI
- 10
- Microstructure and properties of Ti64.51Fe26.40Zr5.86Sn2.93Y0.30 biomedical alloy fabricated by laser additive manufacturing
- Li-ying HAN,Cun-shan WANG
- 11
- δ-phase precipitation regularity of cold-rolled fine-grained GH4169 alloy plate and its effect on mechanical properties
- Hao XUE, Jing-qi ZHAO, Yong-kang LIU, Chun-xiang ZHANG, Jun-ting LUO
- 12
- Effects of doping route on microstructure and mechanical properties of W-1.0wt.%La2O3 alloys
- Jun-jun YANG, Gang CHEN, Zheng CHEN, Xiao-dong MU, Ying YU, Lin ZHANG, Xing-yu LI, Xuan-hui QU, Ming-li QIN
- 13
- Microstructure and compression properties of fine Al2O3 particles dispersion strengthened molybdenum alloy
- Tie-long SUN, Liu-jie XU, Shi-zhong WEI, Kun-ming PAN, Wu-hui LI, Yu-cheng ZHOU, Zhi-min HUANG
- 14
- Comparison of Cu-Al-Ni-Mn-Zr shape memory alloy prepared by selective laser melting and conventional powder metallurgy
- Dennis GERA, Jonadabe SANTOS, Cláudio S. KIMINAMI, Piter GARGARELLA
- 15
- Preparation of NaYF4:Yb3+,Tm3+@NaGdF4:Ce3+,Eu3+ double-jacket microtubes for dual-mode fluorescent anti-counterfeiting
- Yin CHEN, Shao-wen XIE, Chao TONG, Hai-hu TAN, Li-jian XU, Na LI, Jian-xiong XU
- 16
- A simple physical mixing method for MnO2/MnO nanocomposites with superior Zn2+ storage performance
- Xiao-bei ZANG, Ling-tong LI, Zhi-xin SUN, Rabah BOUKHERROUB, Jia-xin MENG, Kun-peng CAI, Qing-guo SHAO, Ning CAO
Mining, Minerals Processing and Metallurgical Engineering
- 17
- New correction method for controlled-source electromagnetics source effects
- Bo YUAN, Di-quan LI, Yan-fang HU
- 18
- Recovery of zinc and lead from Yahyali non-sulphide flotation tailing by sequential acidic and sodium hydroxide leaching in the presence of potassium sodium tartrate
- Sait KURSUNOGLU,Soner TOP, Muammer KAYA
- 19
- Stability constants of Sb5+ with Cl- and thermodynamics of Sb-S-Cl-H2O system involving complex behavior of Sb with Cl
- Gang LI, Yun-tao XIN, Xiao-dong Lü, Qing-hua TIAN, Kang YAN, Long-gang YE
- 20
- Effects of electrolysis process parameters on alumina dissolution and their optimization
- Wen-yuan HOU, He-song LI, Mao LI, Ben-jun CHENG, Yuan FENG
- 21
- Numerical simulation and experimental verification of axial-directional crystallization purification process for high-purity gallium
- You-dong DING, Lan JIANG, Zi-shen LI, Gao-feng FU, Liang YU
- 22
- Optimization of microwave heating thickness for spent automobile catalyst
- Guang-jun HE, Peng LIU, Wen-wen QU, Shi-xing WANG, Li-bo ZHANG
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9