ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 31    No. 7    July 2021

Materials Science and Engineering

1
Microstructural evolution and microsegregation in directional solidification of hypoeutectic Al-Cu alloy: A comparison between experimental data and numerical results obtained via phase-field model
Alexandre F. FERREIRA, Ivaldo L. FERREIRA, Rangel P. ALMEIDA, José A. CASTRO,Roberto C. SALES, Zilmar A. JUNIOR
2
New technique for preparing A356 alloy semisolid slurry and its rheo-diecast microstructure and properties
Ming-fan QI, Yong-lin KANG, Yu-zhao XU, Jing-yuan LI, Ai-sen LIU
3
Effects of single- and multi-stage solid solution treatments on microstructure and properties of as-extruded AA7055 helical profile
Cun-sheng ZHANG, Zhao-gang ZHANG, Ming-fu LIU, En-cheng BAO, Liang CHEN, Guo-qun ZHAO
4
Simulation of low proportion of dynamic recrystallization in 7055 aluminum alloy
Jia-chen LI, Xiao-dong WU, Bin LIAO, Xiao-min LIN, Ling-fei CAO
5
Creep ageing behaviour assisted by electropulsing under different stresses for Al-Cu-Li alloy
Chang ZHOU, Li-hua ZHAN, He LI, Xing ZHAO, Fei CHEN, Ming-hui HUANG
6
Effect of aging treatment on evolution of S′ phase in rapid cold punched Al-Cu-Mg alloy
Ze-yi HU, Cai-he FAN, Tong SHEN, Ling OU, Nan-shan DAI, Lu WANG
7
Isothermal extrusion speed curve design for porthole die of hollow aluminium profile based on PID algorithm and finite element simulations
Jie YI, Zhi-wen LIU, Wen-qi ZENG
8
Effect of Al addition on microstructure and mechanical properties of Mg-Zn-Sn-Mn alloy
Cai-hong HOU, Zhi-song YE, Fu-gang QI, Qing WANG, Lian-hui LI, Xiao-ping OUYANG, Nie ZHAO
9
Microstructure and mechanical properties of high strength Mg-15Gd-1Zn-0.4Zr alloy additive-manufactured by selective laser melting process
Peng-huai FU, Nan-qing WANG, Hai-guang LIAO, Wen-yu XU, Li-ming PENG, Juan CHEN, Guo-qi HU, Wen-jiang DING
10
Corrosion and discharge behavior of Mg-xLa alloys (x=0.0-0.8) as anode materials
Yan SONG, Hua-bao YANG, Yan-fu CHAI, Qing-hang WANG, Bin JIANG, Liang WU, Qin ZOU, Guang-sheng HUANG, Fu-sheng PAN, Andrej ATRENS
11
Quantitative characterization of β-solidifying γ-TiAl alloy with duplex structure
Run-run XU, Miao-quan LI
12
Fabrication and mechanical properties of Ti2AlC/TiAl composites with co-continuous network structure
Li-rong REN, Shui-jie QIN, Si-hao ZHAO, Hua-qiang XIAO
13
Impact of replacement of Re by W on dislocation slip mediated creeps of γ′-Ni3Al phases
Zhou YI, Yun-lei XU, Ping PENG, Jiang-hua CHEN
14
Effect of multi-pass multi-directional forging on tribological properties of Si-rich eutectoid ZA alloys
D. YOUSEFI, R. TAGHIABADI, M. H. SHAERI
15
Multi-point flexible straightening process by reciprocating bending for metal profiles
Xue-ying HUANG, Jun ZHAO, Gao-chao YU, Qing-dang MENG, Zhen-kai MU, Yan-jun LIU
16
Sb2S3 nanorods/porous-carbon composite from natural stibnite ore as high-performance anode for lithium-ion batteries
Qi WANG, Yan-qing LAI, Fang-yang LIU, Liang-xing JIANG, Ming JIA, Xi-lun WANG
17
Enhancing electrochemical performance of SnO2 anode with humic acid modification
Shu-zhen YANG, Yan-fang HUANG, Xue-chun HAN, Gui-hong HAN
18
Facile synthesis of high capacity P2-type Na2/3Fe1/2Mn1/2O2 cathode material for sodium-ion batteries
Mu-lan QIN, Chang-yu YIN, Wen XU, Yang LIU, Jun-hao WEN, Bin SHEN, Wei-gang WANG, Wan-min LIU

Mining, Minerals Processing and Metallurgical Engineering

19
Typical roles of metal ions in mineral flotation: A review
Zhi-yong GAO, Zhe-yi JIANG, Wei SUN, Yue-sheng GAO
20
Energy distribution and effective components analysis of 2n sequence pseudo-random signal
Yang YANG, Ji-shan HE, Di-quan LI
21
Spalling fracture mechanism of granite subjected to dynamic tensile loading
Lin-qi HUANG, Jun WANG, Aliakbar MOMENI, Shao-feng WANG
22
Influence of high concentration Zn2+ on floatability of sphalerite in acidic system
Ting-sheng QIU, Guo-dong LI, Xiao-bo LI, Hua-shan YAN, Chen LIU
23
pH-dependent leaching mechanism of carbonatitic chalcopyrite in ferric sulfate solution
Kolela J NYEMBWE, Elvis FOSSO-KANKEU, Frans WAANDERS, Martin MKANDAWIRE
24
Formation of arsenic-copper-containing particles and their sulfation decomposition mechanism in copper smelting flue gas
Wen-ming YAO, Xiao-bo MIN, Qing-zhu LI, Kai-zhong LI, Yun-yan WANG, Qing-wei WANG, Hui LIU, Sheng-li QU, Zhun-qin DONG, Chao QU, Tao CHEN, Chao SONG
25
Enhanced lithium leaching from lepidolite in continuous tubular reactor using H2SO4+H2SiF6 as lixiviant
Hui GUO, Ge KUANG, Huan LI, Wen-tao PEI, Hai-dong WANG
26
Preparation of 2D carbon ribbon/Al2O3 and nitrogen-doped carbon ribbon/Al2O3 by using MOFs as precursors for removing high-fluoride water
Lei HUANG, Zhi-hui YANG, Lü-ji YAN, Sikpaam Issaka ALHASSAN, Hai-yin GANG, Ting WANG, Hai-ying WANG
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9