ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 32 No. 1 January 2022
Materials Science and Engineering
- 1
- Fabrication of titanium-based alloys with bioactive surface oxide layer as biomedical implants: Opportunity and challenges
- Mohamad Rodzi SITI NUR HAZWANI, Ling Xin LIM, Zainovia LOCKMAN, Hussain ZUHAILAWATI
- 2
- Structural transformation and energy analysis for pile-up dislocations at triple junction of grain boundary
- Ying-jun GAO, Zong-ji HUANG, Qian-qian DENG, KunLIAO, Yi-xuan LI, Xiao-Ai YI, Zhi-rong LUO
- 3
- Enhanced thermal stability and mechanical properties of high-temperature resistant Al-Cu alloy with Zr and Mn micro-alloying
- Teng-teng SUN, Ji-wei GENG, Ze-yu BIAN, Yi WU, Ming-liang WANG, Dong CHEN, Nai-heng MA, Hao-wei WANG
- 4
- Simulation on microstructure evolution of Al-Si alloy under effect of natural convection during solidification
- Zhen-hong WANG, Li-tong ZHANG, Bin SU, Xiao-peng ZHANG
- 5
- Microstructure, strength and welding window of aluminum alloy-stainless steel explosive cladding with different interlayers
- S. SARAVANAN, K. RAGHUKANDAN
- 6
- Microstructure, mechanical properties and wear resistance of SiCp/AZ91 composite prepared by vacuum pressure infiltration
- Zhi-ping GUAN, Ming-yu LI, Kai-xin XIA, Zhi-gang LI, Dan GAO, Po ZHAO, Pin-kui MA, Jia-wang SONG
- 7
- Microstructure and mechanical properties of AZ31 alloy prepared by cyclic expansion extrusion with asymmetrical extrusion cavity
- Min-jie LIANG, Jie ZHENG, Huan LIU, Bao-xing YAO
- 8
- Microstructure and corrosion behavior of as-homogenized and as-extruded Mg-xLi-3Al-2Zn-0.5Y alloys (x=4, 8, 12)
- Xiang PENG, Jia-wei SUN, Hong-jie LIU, Guo-hua WU, Wen-cai LIU
- 9
- Effect of scratch on corrosion resistance of calcium phosphate conversion coated AZ80 magnesium alloy
- Xue-jiao JIA, Jiang-feng SONG, Xiao-rong QU, Fu-yong CAO, Bin JIANG, Andrej ATRENS, Fu-sheng PAN
- 10
- Quantitative characterization of lamellar α precipitation behavior of IMI834 Ti-alloy in isothermal and non-isothermal heat treatments
- Xue-yan LIU, Hong-wei LI, Mei ZHAN, Hong-rui ZHANG
- 11
- Theoretical and experimental investigation of Ti alloy powder production using low-power plasma torches
- Emre YURTKURAN, Rahmi üNAL
- 12
- Standard heat treatment effects on TLP bonded IN-738LC superalloy using BNi-9 filler: An approach to make an ideal joint
- Danesh AMIRI, Ata KAMYABI-GOL, Seyed Abdolkarim SAJJADI
- 13
- Effects of loading rate and peak load on nanoindentation creep behavior of DD407 Ni-base single crystal superalloy
- Zhen-nan ZHANG, Yun-li LI, Wen-ping WU
- 14
- Effect of ECAP processing on distribution of second phase particles, hardness and electrical conductivity of Cu-0.81Cr-0.07Zr alloy
- Filipe CALDATTO DALAN, Gisele Ferreira de LIMA ANDREANI, Dilermando Nagle TRAVESSA, Ilshat Albertovich FAIZOV, Svetlana FAIZOVA, Kátia Regina CARDOSO
- 15
- Ti3C2Tx MXene doped by W atoms for full-spectrum photofixation of nitrogen
- Qi LI, Ji-liang XU, San-mei WANG, Kai-fu YU, Wen-kun ZHU, Ting-ting HOU, Lan-tian ZHANG, Wen-hua ZHANG, Shu-quan LIANG, Liang-bing WANG
- 16
- Alx/HKUST-1 prepared by synthetic exchange as catalyst for reduction of NO by CO at low temperature
- Li ZHANG, Jia-xiang ZHENG, Chao ZHANG, Yu-si WANG, Jing ZENG, Han-bing HE, Tie-chui YUAN, Yi-hong QIN, Ya-jie ZHENG
- 17
- Enhancing storage performance of P2-type Na2/3Fe1/2Mn1/2O2 cathode materials by Al2O3 coating
- Yi-jiao CHANG, Guang-hui XIE, Yong-mao ZHOU, Jie-xi WANG, Zhi-xing WANG, Hua-jun GUO, Bian-zheng YOU, Guo-chun YAN
Mining, Minerals Processing and Metallurgical Engineering
- 18
- Deep metallogenic mechanism in southeastern China based on receiver function data
- Jian-xin LIU, Syed muzyan SHAHZAD, Ya SUN, Asim SHAHZAD, Chuan LI, Meryem FANIDI,Ishfaque MUHAMMAD
- 19
- Bearing mechanism and thickness optimization of ore roof in bauxite stope
- Shao-wei MA, Jian-hua HU, Ya-guang QIN, Qi-fan REN, Dong-jie YANG
- 20
- Effective recovery of chalcopyrite at low temperatures using modified ester collector
- Xian-zhong BU, Yuan-yuan FENG, Ji-wei XUE, Lu YANG, Chong-hui ZHANG
- 21
- Features and mechanisms of self-sintering of molybdenite during oxidative roasting
- Hu SUN, Guang-hui LI, Qun-zhen BU, Zhong-qiao FU, Hui-bo LIU, Xin ZHANG, Jun LUO, Ming-jun RAO, Tao JIANG
- 22
- Hydrometallurgical process for extracting bismuth from by-product of lead smelting based on methanesulfonic acid system
- Tian-xiang NAN, Jian-guang YANG, Chao-bo TANG, Wen-chao WANG, Wei LONG, Ji-yuan YANG
- 23
- Recovery of Fe, V, and Ti in modified Ti-bearing blast furnace slag
- Ji-qing HAN, Jing ZHANG, Jia-hao ZHANG, Xiao CHEN, Li ZHANG, Gan-feng TU
- 24
- Nickel and aluminium recovery from spent reforming catalyst through selective leaching, crystallization and precipitation
- Naga Raju BATTI, N. R. MANDRE
- 25
- Improving corrosion resistance of Cu-Al-based anodes in KF-AlF3-Al2O3 melts
- Sai Krishna PADAMATA, Andrey YASINSKIY, Aleksandr SHABANOV, Timofey BERMESHEV, You-jian YANG, Zhao-wen WANG, Dao CAO, Peter POLYAKOV
- 26
- Copper and arsenic substance flow analysis of pyrometallurgical process for copper production
- Xue-yi GUO, Yuan-lin CHEN, Qin-meng WANG, Song-song WANG, Qing-hua TIAN
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9