ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 33 No. 2 February 2023
Materials Science and Engineering
- 1
- Lightweight metal laminated plates produced via (hot, cold and cryogenic) roll bonding: A review
- Hai-tao GAO, Charlie KONG, Hai-liang YU
- 2
- Tensile property and microstructure of Al-4.77Mn-1.37Mg-0.67Sc-0.25Zr alloy under different selective laser melting processing parameters
- Yi LAI, Ying DENG, Xin-wen ZHU, Yi-fan GUO, Guo-fu XU, Ji-wu HUANG, Zhi-min YIN
- 3
- New powder metallurgy preparation method of homogeneous and isomeric Al-Cu-Mg mixed crystal materials
- Tao YU, Feng LI, Ye WANG, Xue-wen LI
- 4
- Preparation of high performance 5083 aluminum alloy by alternate ring-groove pressing and torsion
- Yong-fei GU, Wei-peng LIU, Hao-shan GUO, Chun-xiang ZHANG, Jun-ting LUO
- 5
- Effect of Ca and rotation speed on microstructure and solidification parameters of AZ91 magnesium alloy produced by semi-solid casting through rotating container process
- Saeed G. SHABESTARI, Ehsan GHANIABADI
- 6
- Enhancing mechanical properties and degradation performance of Mg-0.8wt.%Ca alloy by directional solidification
- YiZHANG, Xiao-huiFENG, Qiu-yanHUANG, Ying-ju LI, Yuan-shengYANG
- 7
- Microstructure evolution, strengthening mechanisms and deformation behavior of high-ductility Mg-3Zn-1Y-1Mn alloy at different extrusion temperatures
- Xiao-feng WU, Chun-xiang XU, Zheng-wei ZHANG, Wen-fu YANG, Jing-shan ZHANG
- 8
- Constitutive relationship and characterization of fracture behavior for WE43 alloy under various stress states
- Peng-fei WU, Chong ZHANG, Yan-shan LOU, Qiang CHEN, Hai-qing NING
- 9
- Effect of volume fraction of 18R-LPSO phase on corrosion resistance of Mg-Zn-Y alloys
- Guo-qiang XI, Yu MOU, Yan-long MA, Xu-han ZHAO, Ju XIONG, Kai MA, Jing-feng WANG
- 10
- Creep behavior and microstructure evolution of titanium matrix composites reinforced with TiB, TiC and Y2O3
- Li-juan XU, Yun-fei ZHENG, Zhen-quan LIANG, Shi-wei HAN, Xiang XUE, Shu-long XIAO, Jing TIAN, Yu-yong CHEN
- 11
- Thermo-physical simulation of deformation behavior and microstructure evolution for linear friction welding of near-β titanium alloy
- Zhen-guo GUO, Tie-jun MA, Xia-wei YANG, Wen-ya LI, Jun TAO, Ju LI, Achilleas VAIRIS
- 12
- Surface, mechanical, and in vitro corrosion properties of arc-deposited TiAlN ceramic coating on biomedical Ti6Al4V alloy
- Mohamed HUSSEIN, Madhan KUMAR, Nestor ANKAH, Ahmed ABDELAAL
- 13
- Anomalous eutectic formation in undercooled Ni-P eutectic alloy
- Wei LI, Xiu-xun WEI, Jin-fu LI
- 14
- Prediction of elastic properties of face-centered cubic high-entropy alloys by machine learning
- Shen WANG, Da LI, Jun XIONG
- 15
- Oxygen stabilized W-Ag films for environmental antibacterial applications
- Tao FU, Li-jun WANG, Ying-jie WANG, Dong-zhen CHEN, Po-wan SHUM
- 16
- Redox-mediated in-situ fabrication of nanoparticle-packed porous Ag films with excellent surface-enhanced Raman scattering performance
- Hao LEI, Yan LI, Meng-wei GUO, Qi-bo ZHANG
- 17
- High-frequent pulsing ablation of C/C-SiC-ZrB2-ZrC composite for different cycles to 2000 times in plasma
- Wei FENG, Yan ZHANG, Lei LIU, Bo-yan LI, Jia-ping ZHANG, Xi CHEN, Zi-bo HE, Cheng-wei TANG, Hai-jun ZHANG, Qin-xin HAN
Mining, Minerals Processing and Metallurgical Engineering
- 18
- Mechanism and kinetics for chlorination roasting of copper smelting slag
- Bei-kai ZHANG, Qin-meng WANG, Xue-yi GUO, Qing-hua TIAN
- 19
- Improvement of utilization efficiency of magnesite by (NH4)2SO4 roasting–water leaching process
- Xiao-yi SHEN, Yan-xiang HUANG, Hong-mei SHAO, Yan LIU, Hui-min GU, Yu-chun ZHAI
- 20
- Efficient preparation of magnesium bicarbonate from magnesium sulfate solution and saponification-extraction for rare earth separation
- Meng WANG, Xiao-wei HUANG, Chao XIA, Zong-yu FENG, Yang XU, De-liang MENG, Xin-lin PENG
- 21
- Selective reduction separation and recovery of tellurium and bismuth from acidic leaching solution
- Li-xiong SHAO, Jiang DIAO, Rui-xin HU, Cheng-qing JI, Wen-feng TAN, Hong-yi LI, Bing XIE
- 22
- Behavior and mechanism of cyanide loss in ultrasound-assisted gold leaching process
- Qi LI, Feng XIE, Yong-feng CHANG, Wei WANG, Li-bo ZHANG
- 23
- Leaching kinetics of de-lithium residue from spent ternary lithium-ion battery cathodic materials with starch as reductant
- Wei-lun LI, Yong-ming CHEN, Shuai LI, Chang-hong WANG, Yun LI, Tian-yu ZHAO, Michael TRAVERSY, Cong CHANG, Ya-fei JIE, Jing HE, Chao-bo TANG, Sheng-hai YANG
- 24
- Effect of electric field on leaching valuable metals from spent lithium-ion batteries
- Jian YANG, Yuan ZHOU, Zong-liang ZHANG, Kai-hua XU, Kun ZHANG, Yan-qing LAI, Liang-xing JIANG
- 25
- Dose-dependent impact of compost on rhizosphere bacterial community in heavy metal-contaminated paddy soil
- Ting XIONG, Jia-wen CUI, Long-bo JIANG, Han WANG, Yi-fu LI, Chang-qing SU, Yan-rong CHEN, Xu-yang CAO, Xing-zhong YUAN,Guo-dong YI
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9