ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Vol. 33    No. 8    August 2023

[PDF]    
Microstructure, mechanical and wear properties of AZ31/CoCrFeNi composites fabricated by friction stir processing
Wen WANG*, Yuan FANG*, Pai PENG, Zhi-juan ZHANG, Peng HAN, Ting ZHANG, Zhi-hao LIU, Xiao-hu GUAN, Zhi WANG, Ke QIAO, Kuai-she WANG
(National and Local Joint Engineering Research Center for Functional Materials Processing, Xi’an University of Architecture and Technology, Xi’an 710055, China)
Abstract: AZ31 magnesium (Mg) alloy composites reinforced with CoCrFeNi high-entropy alloy (HEA) particles were fabricated by friction stir processing (FSP). OM, SEM, EDS, and EBSD were used to characterize the microstructure of composites. Mechanical and wear properties of the composites were investigated by tensile, microhardness, and dry sliding wear tests. The results revealed that HEA particles were homogeneously distributed and exhibited good metallurgical bonding with Mg matrix. The yield strength, ultimate tensile strength, and microhardness of the composites were 80 MPa, 46 MPa, and HV 54.9 higher than those of the base metal (BM), respectively. Fine-grained strengthening was the main strengthening mechanism whose contribution rate on the yield strength was 43.9%. The average friction coefficient of the composites was decreased from 0.331 of BM to 0.240, and the wear mechanism was changed from adhesive wear of BM to abrasive wear.
Key words: friction stir processing; high-entropy alloy particles; magnesium matrix composite; interface layer; tensile properties; wear properties
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9