ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Vol. 17    No. 3    June 2007

[PDF]    
Analysis of rolls deflection of Sendzimir mill by 3D FEM
YU Hai-liang(喻海良)1, LIU Xiang-hua(刘相华)1, LEE Gyoo Taek2
(1. State Key Laboratory of Rolling and Automation, Northeastern University,
Shenyang 110004, China;
2. POSCO Technical Research Laboratories, Pohang 790-785, Korea
)
Abstract:  The deflection of rolls of Sendzimir mill with double AS-U-Roll was simulated by finite element method(FEM). The influences of rolling pressure, strip width and rolls-assignment on rolls deflection were analyzed. The results show that the work roll deflection increases with the increase of rolling pressure and the reduction of work roll radius, but the rigid displacement of work roll slightly changes; the work roll end might appear negative displacement for the narrow strip width and high rolling pressure that might cause the contact of work rolls. The research results are significant for guiding production and theoretical analysis of the rolls system of Sendzimir mill.
Key words: roll deflection; Sendzimir mill; finite element method; double AS-U-roll
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9