Finite element polycrystal model simulation of cold rolling textures in deformation processed two-phase Nb/Al metal-metal composites
(1. Institute of Metal Research, Chinese Academy of Sciences,
Shenyang 110016, China;
2. School of Engineering, Nagoya University, Furo-cho, Chikusa-ku,
Nagoya 464-8603, Japan)
Shenyang 110016, China;
2. School of Engineering, Nagoya University, Furo-cho, Chikusa-ku,
Nagoya 464-8603, Japan)
Abstract: The finite element polycrystal model (FEPM) was extended and applied to simulate the development of the cold rolling textures of matrix aluminum in deformation processed two-phase 10% and 20%Nb/Al(in volume fraction) metal-metal composites on the basis of slip deformation of individual grains. This simulation method can assure the continuity of stress and displacement at the boundary during heterogeneous deformation and take arbitrary boundary conditions into consideration. The starting hot-extruded textures, as initial input condition, were taken into account in the FEPM simulation. The simulation results show that the main texture components and their evolution after various cold rolling reductions in 10% and 20%Nb/Al metal-metal composites are well qualitatively in agreement with the experimental ones. The initially extruded textures are rather weak, so they have no much influence on the simulated final cold rolling textures of the matrix aluminum for Nb/Al composites.
Key words: metal-matrix composites; FEPM; Nb/Al composite; texture; rolling