Mould filling ability and microstructure of aluminum
alloy under electromagnetic die casting
alloy under electromagnetic die casting
(National Key Laboratory for Precision Hot Processing of Metals,
Harbin Institute of Technology, Harbin 150001, P.R.China)
Harbin Institute of Technology, Harbin 150001, P.R.China)
Abstract: In order to solve the mould filling problem of large thinwalled aluminum alloy castings effectively, a new casting technology called electromagnetic die casting has been developed. Emphasis has laid on studying the mould filling ability and microstructure under the mentioned method. The results show that the mould filling ability of A357 is increasing continually with the increasing of the input voltage, that is, the magnetic induction intensity. The pressure head of the molten metal increases from the lowest one at the input of the mould to the highest one at the end of the mould while in a conventional mould the pressure head depends invariably on the sprue height. Under electromagnetic die casting, the grains of A357 alloy are refined, and the pattern of eutectic silicon of alloy changes from rough plate to smooth strip.
Key words: cast aluminum alloy; magnetohydrodynamics; electromagnetic die casting; mould filling ability; microstructure