Primary phase evolution of rheo-processed ADC12 aluminum alloy
(National Engineering Research Center of Light Alloys Net Forming and State Key Laboratory of
Metal Matrix Composite, Shanghai Jiao Tong University, Shanghai 200240, China)
Metal Matrix Composite, Shanghai Jiao Tong University, Shanghai 200240, China)
Abstract: The primary phase evolution of ADC12 aluminum alloy rheo-processed by mechanical rotational barrel system was studied by differential scanning calorimetry (DSC), optical microscopy (OM) and scanning electron microscopy (SEM). The semisolid slurry analyses show that the solid fraction of ADC12 aluminum alloy increases from 0.38 to 0.43 while the roundness decreases from 0.45 to 0.38 with increasing the rotational speed from 30 to 120 r/min. When the pouring temperature decreases from 620to 580 °C, the primary α(Al) morphology changes from spheroidal to rosette-like. Besides, the average particle size of primary phase and solid fraction increase with the decrease of pouring temperature. By rheo-diecasting process, the components with fine, spherical and uniformly distributed primary α(Al) particles were obtained, and the best microstructure was contained at the pouring temperature ranging from 595 to 605 °C. The rheo-processing feasibility of ADC12 aluminum alloy can be explained by the grains controlled growth theory, and the semisolid slurry obeys the Mullins-Sekerka criterion when solidifying in the high pressure die casting machine.
Key words: ADC12 aluminum alloy; primary phase; rheo-processing; near-eutectic aluminum alloy