Effect of pretreatment on electrochemical etching behavior of Al foil in HCl-H2SO4
(1. School of Materials Science and Engineering, Liaocheng University, Liaocheng 252059, China;
2. Beijing Key Laboratory for Corrosion, Erosion and Surface Technology,University of Science and Technology Beijing, Beijing 100083, China)
2. Beijing Key Laboratory for Corrosion, Erosion and Surface Technology,University of Science and Technology Beijing, Beijing 100083, China)
Abstract: The aluminum foil for high voltage aluminum electrolytic capacitor was immersed in 0.5 mol/L H3PO4 or 0.125 mol/L NaOH solution at 40 °C for different time and then DC electro-etched in 1 mol/L HCl+2.5 mol/L H2SO4 electrolyte at 80 °C. The pitting potential and self corrosion potential of Al foil were measured with polarization curves (PC). The potentiostatic current—time curve was recorded and the surface and cross section images of etched Al foil were observed with SEM. The electrochemical impedance spectroscopy (EIS) of etched Al foil and potential transient curves (PTC) during initial etching stage were measured. The results show the chemical pretreatments can activate Al foil surface, facilitate the absorption, diffusion and migration of Cl- onto the Al foil during etching, and improve the initiation rate of meta-stable pits and density of stable pits and tunnels, leading to much increase in the real surface area and special capacitance of etched Al foil.
Key words: Al foil; polarization; pitting corrosion; electrochemical etching; Al electrolytic capacitor