ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Vol. 18    Special 1    December 2008

[PDF]    
Magnetic force improvement and parameter optimization for magnetic abrasive polishing of AZ31 magnesium alloy
S. O. KIM1, J. S. KWAK2
(1. Graduate School of Mechanical Engineering, Pukyong National University, South Korea;2. School of Mechanical Engineering, Pukyong National University, South Korea)
Abstract: The magnetic force acting on workpiece to be machined plays a significantly important role in magnetic abrasive polishing process. But in a case of polishing nonferrous materials, the strength of magnetic force is very low and it leads lower polishing efficiency. The magnesium alloy that has superior mechanical properties for industrial application such as a lightweight and high specific strength is one of the most famous nonferrous materials. An improving strategy of the magnetic force for the AZ31 magnesium alloy installed with a permanent magnet was proposed and experimental verification was carried out. For the proposed strategy, the effect of process parameters on the surface roughness of the AZ31 magnesium alloy was evaluated by a design of experimental method.
Key words: magnetic abrasive polishing process; magnetic force improvement; nonferrous material; permanent magnet; process parameter
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9