ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 20 No. 3 March 2010
Structural Materials
- 1
- Effects of whisker surface treatment on microstructure and properties of Al18B4O33w/6061Al composites
- GENG Lin(耿 林), GUAN Li-na(关丽娜), LÜ Kui-ming(吕奎明)
- 2
- Effects of rheoforming on microstructures and mechanical properties of 7075 wrought aluminum alloy
- GUO Hong-min(郭洪民), YANG Xiang-jie(杨湘杰), WANG Jia-xuan(王家宣),
HU Bin(胡 斌), ZHU Guang-lei(朱光磊)
- 3
- Characteristics of two Al based functionally gradient
composites reinforced by primary Si particles and Si/
in situ Mg2Si particles in centrifugal casting - ZHAI Yan-bo(翟彦博), LIU Chang-ming(刘昌明), WANG Kai(王 开), ZOU Mao-hua(邹茂华), XIE Yong(谢 勇)
- 4
- Friction and wear of 7075 aluminum alloy induced by torsional fretting
- CAI Zhen-bing(蔡振兵), ZHU Min-hao(朱旻昊), LIN Xiu-zhou(林修洲)
- 5
- Effect of Sb on microstructure and mechanical properties in
Mg-10Zn-5Al high zinc magnesium alloys - ZHANG Jin-shan(张金山), ZHANG Zhao-guang(张照光), ZHANG Yu-hua(张玉华),
LI Shan-hu(李山虎), LIU Ya-li(刘雅丽)
- 6
- Microstructure and mechanical properties of Mg-6Al-0.3Mn-xY alloys prepared by casting and hot rolling
- SU Gui-hua(苏桂花), ZHANG Liang(张 亮), CHENG Li-ren(程丽任),
LIU Yong-bing(刘勇兵), CAO Zhan-yi(曹占义)
- 7
- Preparation of porous Ti35Nb alloy and its mechanical properties under monotonic and cyclic loading
- LIN Jian-guo(林建国), ZHANG Yun-fei(张云飞), MA Mo(马 蓦)
- 8
- Manufacturing techniques of armor strips excavated from
Emperor Qin Shi Huang’s mausoleum, China - LIAO Ling-min(廖灵敏), PAN Chun-xu(潘春旭), MA Yu(马 宇)
- 9
- Forming mechanism of integral serrated high fins by
plowing-extruding based on variational feed - WAN Zhen-ping(万珍平), YAN Hui(燕 辉), TANG Yong(汤 勇)
Functional Materials
- 10
- Hydrogen storage behaviours of nanocrystalline and amorphous
Mg20Ni10−xCox (x=0−4) alloys prepared by melt spinning - ZHANG Yang-huan(张羊换), ZHAO Dong-liang(赵栋梁), LI Bao-wei(李保卫),
QI Yan(祁 焱), GUO Shi-hai(郭世海), WANG Xin-lin(王新林)
- 11
- Creep behavior of SnAgCu solders with rare earth Ce doping
- ZHANG Liang(张 亮), XUE Song-bai(薛松柏), GAO Li-li(皋利利), ZENG Guang(曾 广),
CHEN Yan(陈 燕), YU Sheng-lin(禹胜林),
- 12
- Ultrasonic characterization of modified Cr2O3 coatings by
reflection coefficient spectroscopy - LI Ji-cheng(李继承), LIN Li (林 莉),LI Xi-meng(李喜孟), LI Guang(李 光), LEI Ming-kai(雷明凯)
- 13
- Effect of surface nanocrystallization and PPEC time on
complex nanocrystalline hard layer fabricated by plasma electrolysis - M. ALIOFKHAZRAEI, SH. AHANGARANI, A. SABOUR ROUHAGHDAM
- 14
- Sol-gel synthesis and photoluminescence of LaPO4׃Eu3+ nanorods
- GAO Rui(高 锐), QIAN Dong(钱 东), LI Wei(李 卫)
- 15
- Catalytic performance and kinetics of Au/γ-Al2O3 catalysts for
low-temperature combustion of light alcohols - DENG Qian(邓 谦), LI Xiao-mei(李小梅), PENG Zhen-shan(彭振山),
LONG Yun-fei(龙云飞), XIANG Long-ming(相龙明), CAI Tie-jun(蔡铁军)<
- 16
- Microstructure and properties of ultra-fine tungsten heavy alloys prepared by mechanical alloying and electric current activated sintering
- LI Xiao-qiang(李小强), XIN Hong-wei(辛红伟), HU Ke(胡 可), LI Yuan-yuan(李元元)
Computational Materials Science and Numerical Modelling
- 17
- Thermodynamic assessment of Mg-Ga binary system
- MENG Fan-gui(孟凡桂), WANG Jiang(王 江), RONG Mao-hua(戎茂华),
LIU Li-bin(刘立斌), JIN Zhan-peng(金展鹏)
- 18
- Identification of nucleation parameter for cellular automaton model of
dynamic recrystallization - JIN Zhao-yang(金朝阳), LIU Juan(刘 娟), CUI Zhen-shan(崔振山), WEI Dong-lai(韦东来)
- 19
- Differences of grain-refining effect of Sc and Ti additions in aluminum by empirical electron theory analysis
- YE Yi-cong(叶益聪), HE Liang-ju(何良菊), LI Pei-jie(李培杰)
- 20
- Application of new VBHF optimization strategy to improve formability of automobile panels with aluminum alloy sheet
- WANG Wu-rong(王武荣), CHEN Guan-long(陈关龙), LIN Zhong-qin(林忠钦)
- 21
- Numerical and physical simulation of new SPD method combining extrusion and equal channel angular pressing for AZ31 magnesium alloy
- ZHANG Ding-fei(张丁非), HU Hong-jun(胡红军), PAN Fu-sheng(潘复生),
YANG Ming-bo(杨明波), ZHANG Jun-ping(张钧萍)
- 22
- Cross-sectional distortion behaviors of thin-walled rectangular tube in
rotary-draw bending process - ZHAO Gang-yao(赵刚要), LIU Yu-li(刘郁丽), YANG He(杨 合), LU Cai-hong(卢彩红)
- 23
- Effect of nonlinear liquidus and solidus on dendrite growth in
bulk undercooled melts - CHEN Zheng(陈 正), WANG Hai-feng(王海丰), LIU Feng(刘 峰), YANG Wei(杨 伟)
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering
- 24
- Flotation techniques for separation of diaspore from bauxite using
Gemini collector and starch depressant - XIA Liu-yin(夏柳荫), ZHONG Hong(钟 宏), LIU Guang-yi(刘广义)
- 25
- Effect of vacancy defects on electronic properties and activation of sphalerite (110) surface by first-principles
- CHEN Jian-hua(陈建华), CHEN Ye(陈 晔), LI Yu-qiong(李玉琼)
- 26
- Isolation, characterization and extraction of mer gene of Hg2+ resisting strain D2
- ZENG Xiao-xi(曾晓希), TAGN Jian-xin(汤建新), JIANG Pei(蒋 佩),
LIU Hong-wei(刘宏伟), DAI Zhi-min(戴志敏), LIU Xue-duan(刘学端)
- 27
- Application of ionic liquids in hydrometallurgy of nonferrous metals
- TIAN Guo-cai(田国才), LI Jian(李 坚), HUA Yi-xin(华一新)
- 28
- Adjustment on gibbsite and boehmite co-precipitation from
supersaturated sodium aluminate solutions - WANG Zhi(王 志), YANG Liu(杨 柳), ZHANG Juan(张 娟),
GUO Zhan-cheng(郭占成), ZHANG Yi(张 懿)
- 29
- Periodical attenuation of Al(OH)3 particles from seed precipitation in
seeded sodium aluminate solution - WU Yu-sheng(吴玉胜), ZHANG Di(张 迪), LI Ming-chun(李明春),
BI Shi-wen(毕诗文), YANG Yi-hong(杨毅宏)
- 30
- Selective separation of copper and cadmium from zinc solutions by
low current density electrolysis - YANG Bo(杨 卜), WANG Cheng-yan(王成彦), LI Dun-fang(李敦钫),
YIN Fei(尹 飞), CHEN Yong-qiang(陈永强), WANG Nian-wei(王念卫)
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9