ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 32 No. 11 November 2022
Materials Science and Engineering
- 1
- A review of refractory high-entropy alloys
- Yu-sheng TIAN, Wen-zhe ZHOU, Qing-biao TAN, Ming-xu WU, Shen QIAO, Guo-liang ZHU, An-ping DONG, Da SHU, Bao-de SUN
- 2
- Effect of solution treatment time on plasticity and ductile fracture of 7075 aluminum alloy sheet in hot stamping process
- Hui-cheng GENG, Yi-lin WANG, Bin ZHU, Zi-jian WANG, Yi-sheng ZHANG
- 3
- Role of yttrium content in twinning behavior of extruded Mg-Y sheets under tension/compression
- Yan-qin CHAI, Dong-di YIN, Shen HUA, Guang-hao HUANG, Hao ZHOU, Jiang ZHENG, Qu-dong WANG
- 4
- Effects of pre-compression on formation of dynamic precipitates and creep anisotropy of hot-extruded AZ91-2Y magnesium alloy
- Wei LI, Huang HUANG, Wei-ying HUANG, Jian CHEN, Sheng-de ZHANG, Zhen-yu XIAO, Wei QIU
- 5
- Influence of free-end torsion on compressive behavior of extruded AZ31 rod at various temperatures
- Fan WU, Meng WANG, Zhi-wen DU, Ruo-lan SHI, Qi SHANG, Ting-ting LIU, Ning GUO, Sheng-feng GUO, Bo SONG
- 6
- Microstructure and mechanical behavior of Ti-Cu alloys produced by semisolid processing
- Kaio NIITSU CAMPO, Caio Chaussê de FREITAS, éder Sócrates Najar LOPES, Suk-Chun MOON, Rian DIPPENAAR, Rubens CARAM
- 7
- Diffusion bonding of Ti-6Al-4V titanium alloy powder and solid by hot isostatic pressing
- Yi XIAO, Li-hui LANG, Wen-cai XU, De-xin ZHANG
- 8
- Effect of bias voltage on microstructure, mechanical and tribological properties of TiAlN coatings
- Hong-shuai CAO, Fu-jia LIU, Hao LI, Wen-zhong LUO, Fu-gang QI, Li-wei LU, Nie ZHAO, Xiao-ping OUYANG
- 9
- Microstructure and mechanical properties evolution of 65Cu–35Zn brass tube during cyclic rotating-bending process
- Zi-cheng ZHANG, Tsuyoshi FURUSHIMA, Ken-ichi MANABE
- 10
- Microstructure and mechanical properties of Cu/Al joints brazed using (Cu, Ni, Zr, Er)-modified Al-Si filler alloys
- Hua-xin LI, Ying-dian FENG, Wei-jian SHEN, Chuan-yang Lü, Wen-jian ZHENG, Ying-he MA, Gang MA, Zhong-ping JIN, Yan-ming HE, Jian-guo YANG
- 11
- Microstructure, formation mechanism and properties of plasma-sprayed Cr7C3-CrSi2-Al2O3 coatings
- Yu-duo MA, Pei-wen RU, Lei WANG, Yong YANG, Peng-yue GAO, Yan-wei WANG, Yu-hang CUI, Wen-wei SUN, Xing-yu WANG, Liang WANG
- 12
- Micromorphology and texture of niobium coating electrodeposited in NaCl-KCl-CsCl molten salt system
- Shuang-peng HU, Shu-xin BAI, Li-an ZHU, Yi-cong YE, Zhen WANG, Shun LI, Yu TANG
- 13
- Improving electrochemical performance of Ni-rich layered oxide cathodes via one-step dual modification strategy
- Yuan-lin CAO, Xiu-kang YANG, Lu WANG, Ling XIAO, Ni FU, Li ZOU, Wen-bo MA, Zhe-ting LIU, Xiao-qin WANG, Li LIU, Hong-bo SHU, Xian-you WANG
- 14
- Lithium-ion diffusion path of tetragonal tungsten bronze (TTB) phase Nb18W16O93
- Chao SHEN, Sai-nan JIANG, Cui-min DING, Wei-shun XUE, Ke-yu XIE
- 15
- Molecular dynamics analysis on bending mechanical behavior of alumina nanowires at different loading rates
- Yuxiao James HE, Bin MA
Mining, Minerals Processing and Metallurgical Engineering
- 16
- Failure modes and slabbing mechanisms of hard rock with different height-to-width ratios under uniaxial compression
- Yu-zhe ZHAO, Lin-qi HUANG, Xi-bing LI, Chong-jin LI, Zheng-hong CHEN, Zhi-wei CAO
- 17
- Dynamic compressive strength and failure mechanisms of microwave damaged sandstone subjected to intermediate loading rate
- Pin WANG, Tu-bing YIN, Xi-bing LI, Heinz KONIETZKY
- 18
- Interaction mechanism of ferrate(VI) with arsenopyrite surface and its effect on flotation separation of chalcopyrite from arsenopyrite
- Run-peng LIAO, Pan-jin HU, Shu-ming WEN, Yong-xing ZHENG, Xian-hui QIU, Jin-fang Lü, Jian LIU
- 19
- Galvanic effect of magnetite on electrochemical oxidation of arsenopyrite in acidic culture medium
- Sha DENG, Guo-hua GU, Tao LONG, Wei XIAO, Wei YANG
- 20
- Coordination configurations of cupric tartrate in electronic industry wastewater
- Ming-jun HAN, Jian-yong HE, Wei SUN, Sai LI, Heng YU, Tong YUE, Xin WEI, Chen-yang ZHANG
- 21
- Suspension roasting process of vanadium-bearing stone coal: Characterization, kinetics and thermodynamics
- Shuai YUAN, Yong-hong QIN, Yong-peng JIN, Yan-jun LI
- 22
- Separation and recovery of Ni from copper electrolyte by crystallization of nickel ammonium sulfate double salt
- Yi WANG, BiaoLIU, Xue-wen WANG, Yu-qi MENG, Xing-ming WANG, Ming-yu WANG
- 23
- Molten salt electrosynthesis of silicon carbide nanoparticles and their photoluminescence property
- Zhong-ya PANG, Xiang LI, Xue-qiang ZHANG, Jin-jian LI, Shu-juan WANG, Xiao-lu XIONG, Guang-shi LI, Qian XU, Zhong-fu ZHOU, Xing-li ZOU, Xiong-gang LU
- 24
- One-step production of high-strength titanium alloy by sintering titanium hydride powder from upgraded titania slag
- Zhao-wang DONG, Yang XIA, Xue-yi GUO, Qing-hua TIAN, Han-ning LIU, Pei-dong LIU, Yu-bing CHEN
- 25
- An environmentally benign and sustainable process for carbon recovery and efficient defluorination of spent carbon cathode
- Yi-fan LI, Hao CHENG, Pei-yu GONG, Kai YANG, Zhong-liang TIAN, Yan-qing LAI
- 26
- Life cycle assessment for waste acid treatment in zinc smelting
- Ying-yan HU, Min LI, Wei-guo WU, Yong KE, Lu-jing LIU, Xue-liang WANG
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9