ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Vol. 16    No. 3    June 2006

[PDF]    
Effect of additional elements on aging behavior of Al-Zn-Mg-Cu alloys by spray forming
LI Li(栗 丽)1, ZHOU Tie-tao(周铁涛)1, LI Huan-xi(李焕喜)1, CHEN Chang-qi(陈昌麒)1,
XIONG Bai-qing(熊柏青)2, SHI Li-kai(石力开)2
(1.School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics,Beijing 100083, China;
2.National Engineering Research Center for Nonferrous Metals Composites, General Research Institute for Nonferrous Metals, Beijing 100088, China
)
Abstract: The microstructure and aging behavior of spray formed Al-Zn-Mg-Cu alloys were investigated as a function of alloying element addition. It is revealed that the grains of the as-deposited alloys are refined with increasing Zn element, while the function of Ni addition is to reduce grain boundary particles and eutectic in the as-extruded condition. Particles containing Mg and Zn are found to increase with Zn content increasing, while the role of Ni is to reduce both the number and size of these particles. After uniform heat treatment, parts of educts in grain boundary have melted and the grains have not grown up obviously. After heat extrusion, the microstructure becomes denser and there are many precipitated phases in cross-section while there are second phase arranging along extruded direction in longitudinal section. During artificial aging, the increment of Zn content produces not much effect on peak hardness, in addition to an accelerated overage softening. An addition of about 0.13%Ni, however, gives rise to not only improved peak hardness but also an improvement of property stability at the ageing temperature.
Key words: Al-Zn-Mg-Cu alloy; spray forming; alloying; microstructure; aging behavior
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9