Amorphous-crystalline transition layers formation during quenching of
Fe61Co7Zr10Mo5W2B15 melt
Fe61Co7Zr10Mo5W2B15 melt
(1. School of Materials Science and Engineering, Harbin Institute of Technology,
Harbin 150001, China;
2. A.A. Baikov Institute of Metallurgy andMaterials Science,
Russian Academy of Sciences,Moscow 117911, Russia)
Harbin 150001, China;
2. A.A. Baikov Institute of Metallurgy andMaterials Science,
Russian Academy of Sciences,Moscow 117911, Russia)
Abstract: New Fe-based multicomponent amorphous alloys have been developed recently based on empirical rules for large glass forming ability(GFA). In the present investigation, the master alloy ingot with the nominal composition of Fe61Co7Zr10Mo5W2B15(mole fraction, %) was prepared by arc-melting under Ti-gettered Ar atmosphere. The Fe-based buttons with different transverse cross sections were fabricated by arc-melting method, and the d2.5mm Fe-based rods were manufactured by injection technique. Characterization of the ingots and the parameters associated with the thermal stability were carried out by X-ray diffractometry(XRD) and high temperature differential scanning calorimeter(DSC), respectively. The interval of the supercooled liquid region is 39K for the Fe-based alloy. The GFA of Fe-based alloys is relatively lower, to the buttons obtained are all crystallized. The Fe-based rod exhibites a high Vickers hardness up to HV 1329. In addition, an amorphous-crystalline transition layers are observed in the rod. This transition zone is caused by unhomogeneous temperature distribution and relatively lower GFA for Fe-based alloys.
Key words: bulk amorphous alloy; metallic glass; GFA(glass forming ability); quenching; crystallization